Posted by PittSpecial | Today @ 02:54 PM | 379 Views
Guys!

Since my buddy (Gerry) is retired he beat me to having the first operational SLOW STICK from the lot I found in my house last night!

Gerry really wants to go back to relaxing times and fly SLOW and LOW as he has a Grand Daughter (2 years old) that is transfixed with RC Airplanes!

Here is Gerry's Dark Green SLOW STICK with Brushless Power! THE CRAZE IS BACK!





...Continue Reading
Posted by Speedemond | Today @ 12:13 PM | 424 Views
Up for sale is a brand new never flown XPlane. It has all top of the electronics in it. Castle esc, Neu Motor, hi tec servos and Spektrum Rx. No transmitter included. It was built by a master builder a good friend of mine. I hate to let it go but I feel it’s a little over my head. $1200.00 shipping is on the buyer. Message me if interested. Serious inquiries only please. Shahe 626-429-5746
Posted by DutchRC | Today @ 11:24 AM | 430 Views
Halloa guys

I got this very small lipo charger in from it's distributor.. And eventhough it IS small, it packs a punch.. 400W output and 8S capable is nothing to snarf at

Link to it: ToolkitRC M8s - very small lipo charger

At this moment it's available from for instance Banggood..

ToolkitRC M8S - All-In-One Charger & Diagnoistics Tool! REVIEW (22 min 10 sec)

Posted by Icflyer65 | Today @ 07:08 AM | 495 Views
So I acquired Proctor Antic Monoplane which the wings were partially framed. Put the wings on my building board and am on my way. I added the bamboo cross braces and have been sanding this far.
Posted by phyngineer | Today @ 05:41 AM | 566 Views
The 17th China International Social Public Safety Expo (CPSE)will be held from October 28th-31 th,2019 in Shenzhen Convention & Exhibition Center, Shenzhen, China. At that time, it will present the most advanced artificial intelligence, big data, and intelligent security products to the world.
The largest scale in the exhibition
This CPSE will be held at all exhibition halls of the Shenzhen Convention and Exhibition Center, The scale of this exhibition is the largest in history, with an exhibition covers an area of 30,000㎡, and hundreds of industry brand companies and more than 2,000 exhibitors participated in the exhibition. As a high-end brand event in China's security industry and one of the important international security expo with global influence, the Shenzhen security expo will focus on showing smart city solutions, security prevention solutions, police equipment, emergency rescue, Bio-recognition, artificial intelligence machines, and other industries. This exhibition has attracted great attention among manufacturers, engineers, and distributors in many industries across the country.
UAVs play an important role in security
In the construction of smart security, UAVs play an important role. In the security scenes of military reconnaissance, emergency flood control, drought prevention, border surveillance, police monitoring, forest fire monitoring, and environmental monitoring, the drone acts as a "security weapon" for the reconnaissance unit....Continue Reading
Posted by ja22ygeoff | Today @ 03:47 AM | 652 Views
T16 Pro Jumper Radio so far I'm loving it , made the switch from Frsky after the whole threatening dealers and now loosing D8 support .
Glad I made the switch as the Jumper is actually a better transmitter and will even bind to my older models I have lying around.
Ive included a purchase link as I bought it from Quadcopters uk.
Jumper T16 Pro Radio with Hall Gimbals
Posted by old4570 | Yesterday @ 11:30 PM | 744 Views
I know , I said I was done with the 1103 .... But it's such a cute motor !

RCX 1103 7800kv ( 2 - 3 s )

If you look at the data sheet , well it say's the motor will do 10A and over 100 Watt .
I am highly dubious .

My first 1103 was DOA
My second , well I cooked that motor testing a cut down prop . ( around 7A )

I got some 3025 props with the motor .
Motor is installed in the 450x micro wing .
With the 3025 prop amps is a little north of 7A 2s( again )
The motor gets hot , the motor wires get hot ..
I only ran 100% throttle for about 3 seconds , which was enough for substantial warmth .

2s test :

At 1A I recorded some 12,000+ rpm
At 2A I recorded some 16,000+ rpm
And at 3A I recorded some 19,000+ rpm
With the 3025 prop .
3A is right around 50% throttle ( Physically on the Tx )
And at 3A current the motor wires are getting warm ..
Not sure how anyone would rate this motor size 10A ?
I would suggest half that as something to avoid continuously .

Anyhows , blowing a gale outside right now 40kmh with wind gusts over 70kmh

Will take the 450x out ASAP ( as the wind allows ) , really want to try out that 3025 prop ..
Must remember to limit myself to about 50% throttle .
Posted by Hobby Details | Yesterday @ 08:24 PM | 908 Views
1/8 or 1/10 Heavy Duty Water Filled On Road Safety Barrier 1pc
180*70mm, filled with water 420g.
Wholesale Price please PM or contact me at: [email protected]
Posted by PittSpecial | Yesterday @ 07:28 PM | 991 Views
Wow!

I had no idea that I had so many Slow Sticks and with a variety of colors!

I wished that I had the BLUE!

Two Slow Stick, I acquired from a good friend named RICHARD who moved away to Madison, WI.

Anyway, I found a brand new In-The-Box "YELLOW" Version Slow Stick, Slope Version (No Power System).

Got my hands FULL!

A few pictures from a few minutes ago!...Continue Reading
Posted by DutchRC | Yesterday @ 03:04 PM | 1,177 Views
Halloa FPV pilots

so yes.. I'm not really the first to be reviewing this ER349 huh? I ordered in a sale a while back and had not come around to actually flying it yet :$
BUT.. I thought it would be nice combine my first-flight-experience with it with some insight into the RC industry...

Link to this quad: Eachine ER349se 3-inch racer

Diatone / Eachine ER349se - the best Eachine E V E R ! :D (19 min 52 sec)


Lipo used: GensAce Tattu R-line 850mah 4S

Specifications:
type: FPV Racing quad
wheelbase: 135 mm
base thickness: 3.5mm
material(s): carbon fiber + plastick
flight controller: Mamba F405 mini MK2
firmware version: 3.5.1
ESC's: Mamba 4x25A 4 in one, Dshot1200
motors: Mamba MB1408 4000 kv
propellors: GemFan Flash 3052 & some other alternate props
FPV camera: Runcam micro Swift 2
VTX: TBS Unify pro
Lipo: 650mah 4S (not included)
OSD: Yes, Betaflight
smart audio: yes (TBS)
buzzer: yes
LED's: YES!
spare props: yes, 1 set
Posted by GLSJr | Yesterday @ 01:57 PM | 1,161 Views
Just when I'm feeling confident that I have a handle on this electric stuff, I get thrown a curve. I just discovered Anti-spark connectors. Apparently they can prevent a massive blast of hundreds of amps to your on-board electronics, such as the ESC. However, they're not fool-proof, and can find themselves melted down. Found it on You Tube (Tech Tuesday). Anyone had any experience with thunder claps inside your plane?
Posted by PittSpecial | Yesterday @ 01:04 PM | 1,187 Views
Heck!

Talk about a revisiting an OLD and previously thought Long Gone GWS SLOW STICK!

https://www.rcgroups.com/forums/show...s-at-Graves-RC



Posted by GroundControlRC | Yesterday @ 08:32 AM | 1,380 Views


Tip #30 - CrazyBee Flight Controller Rebooting Issue Fix!

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #Mobula7 #CrazyBee

Here is a link to the Video:
https://www.youtube.com/watch?v=slSDS_noJAk

I had an issue with my Brand New Mobula 7 Power Whoop which has a CrazyBee Flight Controller.
The Flight Controller would reboot during flight about every 10-15 seconds.
This fix took care of this issue ;-)

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Here are links to this Flight Controller, Power Whoop, Spare Parts, Upgrade Parts, & LIPOs:

Happymodel Crazybee F4 Pro V2.0 Mobula7 HD 1-3S Flight Controller w/ 5A ESC & Compatible Flysky/Frsky/DSMX Receiver
https://www.banggood.com/Happymodel-...47791920140372

Happymodel Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop (***Select Receiver Type YOU need!)
https://www.banggood.com/Happymodel-...47791920140372

Happymodel 3.8V 300mAh 30C 1-2S Lipo Battery PH2.0 Plug for Mobula7 Snapper6/7/8 UR65 US65 UK65
https://www.banggood.com/Happymodel-...47791920140372

10Pcs URUAV 3.8V 300mAh 40/80C 1S HV 4.35V PH2.0 Lipo Battery
https://www.banggood.com/10Pcs-URUAV...47791920140372

10Pcs URUAV 3.8V 300Mah 40/80C 1S HV 4.35V Lipo Battery PH2.0 Plug for Eachine TRASHCAN Snapper6 7 Mobula7
https://www.banggood.com/10Pcs-URUAV...47791920140372

Happymodel Mobula7 Part 40mm 1.0mm Hole 4-Blade...Continue Reading
Posted by RADIOLINKRC | Yesterday @ 07:02 AM | 1,481 Views
Hiiiiii friends!

RadioLink has recently launched a new aircraft, fixed wing A560 and is now inviting all RC fans who are interested in fixed wing to make reviews.


Features of A560
  • The exclusive and expertly tuned flight controller algorithm makes A560 possible to flight even in limited space including indoors
  • Handy enough for beginners with specially developed flight controller but enjoyable with free styles for fixed wing experts
  • Compact size (560mm of wingspan), super lightweight (139.5g) and extremely durable PP foam airframe
  • Factory-installed flight controller, servos and power systems with approximate assembly time of less than 10mins
  • Super-simple transmitter setup- no complex programming required
  • Powerful brushless motors compatible with 2S 660mAh batteries with flight time of more than 10mins
  • Completion Level: Bind-N-Fly
  • Minimum Required Radio: all R/C supported with SBUS/PPM signals

Click http://radiolink.com.cn/doce/product-detail-146.html to know more about A560.

A560 Flight with Single Hand (2 min 45 sec)

A560 Vertical Flight (0 min 44 sec)
...Continue Reading
Posted by Qwinout | Yesterday @ 04:46 AM | 1,556 Views
Jumper T16 Pro Hall Gimbal Open Source Built-in Module Multi-protocol Radio Transmitter 2.4G 16CH 4.3" LCD

https://qwinout.com/collections/radi...g-16ch-4-3-lcd

Mode 1 = right hand throttle

Mode 2 = left hand throttle

The T16 Pro version does indeed support Crossfire and in CRSF mode with LUA script support and most importabtly users could use JP4in1 and CRSF a same time.If you are looking for the most compact, most afforabe and most EPIC Crossfire compatible TXin the market today look no further than the Jumper T16 Pro.

Jumper T16 Pro features:
Gimbal Type: HALL SENSOR
Built-in Multi-protocol Module
Removable battery
Supports Telemetry
Memory 16M (can be expanded by Micro SD card)
Voice function
Vibration reminder function
Standard JR module slot
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Two-color LED status display
Wheel menu button
Compatible with JumperTX (An independent fork of OpenTX)
Industrial grade 4.3 inch 480*272 outdoor readable color screen
Posted by Qwinout | Yesterday @ 04:38 AM | 1,549 Views
https://qwinout.com/blogs/news/qwino...jumper-t16-pro

18 is the Lucky Number of www.qwinout.com
So from today on,we will offer a surprise for each number End with 18,for example, the order number.
QwinOut1518 will receive a Jumper T16 Pro as free gift
https://qwinout.com/collections/radi...g-16ch-4-3-lcd
Posted by visioneer_one | Yesterday @ 01:58 AM | 1,662 Views
Responded to the OP. Placed my order on Monday, received it today (Wednesday.) I'm currently stateside, so shipping was delightfully quick!





...Continue Reading
Posted by Montanaman2 | Yesterday @ 01:24 AM | 1,602 Views
If you have it contact me