Ready to change the future? Now hiring!

Mugin UAV is changing how UAVs are viewed by opening the possibilities of affordable solutions that people can trust.

From the moment Mugin UAV first opened its doors, we have remained steadfast in one goal: Designing UAV platforms for the betterment of humanity. These benefits can cover many different fields, including transporting medical supplies, responding to disaster areas, police and surveillance, and in some cases even delivering life saving blood drop to remote areas.

We're pleased to announce that with our growth our desires are increasing too. Mugin UAV is currently seeking an engineering minded person with significant small UAS related experience to join our team as an R&D Support Engineer. This position requires an open mind, a desire to see the world, and the ability to relocate to our HQ in Xiamen China. The right cadidate will be self-motivated, have hands on experience in robotics and UAS related technologies, and be a well rounded communicator.

About you:

* You're a self-motivated individual with a passion of UAVs and aviation.
* You understand UAVs and associated technologies.
* You're an accomplished UAV pilot who is aware of the basic risks of flight and will take every possible measure to reduce risks to equipment and team members.
* You follow the hobby industry and commercial off the shelf providers of components that are relevant to UAV development.
* You have strong grasp of...Continue Reading

The Mugin 6000mm VTOL is designed based on the Mugin 4450 VTOL with extended wingspan of 6000mm, in hope of reaching a longer flight time to 10 hours.

Comparing to Mugin 4450 VTOL, there’re some new features with this 6000 VTOL:

Extended Wingspan of 6000mm.
Each boom is divided into two pieces for easier carry and international shipping.
Booms and internal ribs all have been strengthened.
Built-in VTOL motor mounts with 5 degree offset angle.

The Mugin 6000 is an exceptionally large aircraft designed for professional use and can be equipped with a full system of advanced control electronics to run in sync with the most advanced ground stations. With full fuel of 27 liters, the flight time can be over 7 hours.

SPECIFICATIONS:

Main material: carbon fiber
Wingspan: 6000mm
Length: 3500mm
Maximum Width of Fuselage: 375mm
Wing Area: 312 dm2
Empty Weight: 34.2kg
Maximum Take-off Weight: 110kg
Maximum Speed: 140km/hr
Cruise Speed: 90km/hr
Stalling Speed: 65km/hr
Maximum Payload: 25kg
Volume of Fuel Tank: 27Liters
Maximum Flying Time: 6 to 10 Hours
Equipment cabin size: 920mm x 340mm x 350mm

*** 85kg Take-off Weight
*** 25kg Payload after Full Fuel
*** 7 Hours Flight Time
*** VTOL

Mugin 4450 Super Huge VTOL UAV
https://www.muginuav.com/product/mug...white-version/


The Mugin 4450mm is a heavy lift gas powered UAV. Now here comes the VTOL version. It is an aircraft with the vertical take-off and landing (VTOL) function that can hover, take off, and land vertically. No runway needed and much easier to save crash.

The Mugin 4450 is an exceptionally large aircraft designed for professional use and can be equipped with a full system of advanced control electronics to run in sync with the most advanced ground stations. With a 27L fuel tank, its payload can be up to 25kg. This plane can get most anywhere, and preform most any job related task you may require.

SPECIFICATIONS:

• Wingspan: 4510mm
• Length: 3400mm
• Maximum Width of Fuselage: 375mm
• Wing Area: 236 dm2
• Empty Weight: 25kg
• Maximum Take-off Weight: 85kg
• Maximum Speed: 170km/hr
• Stalling Speed: 55km/hr
• Payload (except tank plane still can load): 20 to 25kg
• Volume of Fuel Tank: 27L
• Maximum Flying Time: 7 Hours
• Equipments cabin size: 920mm x 340mm x 350mm

Packaging Size (3 Cartons):

1900*550*510mm for the Fuselage
1710*760*330mm for the Wings
1590*330*200mm for other Parts

For your easier build, we have a power combo (Need to purchase separately) for this Mugin 4450 VTOL. It includes:

• DLE 170cc engine x 1
• Eagle EA120 85KV VTOL Motors x 4
• Hobbywing 14S 200A ESC x 4
• Pilot Servos x 8
• Premium 32″ x 10″ Forward Propeller x 1
• 40*13 VTOL Propeller x 2 Pairs

The Mugin fiberglass VTOL now comes with different colors. Here it is an example for Mugin 3600. All the same setup, but one more choice for the color. You can choose the normal blue gray version of Mugin 3600, or this white version.

Link: https://www.muginuav.com/product/mug...white-version/

This is a new version of Mugin 3600 VTOL UAV. We have changed the main material from wood to fiberglass, so as make the plane more durable and much lighter. The empty weight of previous version was 14.6kg, but this fiberglass version is 13kg only. You are now able to carry more equipment with the flight.

The Mugin 3600mm is the aircraft with the vertical take-off and landing (VTOL) function that can hover, take off, and land vertically. The platform caters to larger UAS projects such as universities or commercial projects. This aircraft is capable of carrying a wide variety of payload configurations and offers extended flight times. It is an exceptionally large aircraft designed for professional use and can be equipped with a full system of advanced control electronics to run in sync with the most advanced ground stations. This plane can get most anywhere, and perform most any job-related task you may require.

Specifications:

Dimensions

Wingspan: 3530mm
Length: 2420mm
Wing Area: 132dm2
Payload Bay: 560mm x 260mm x 270mm

Weight and Payload

Empty Weight: 13kg
Empty Weight with ARF Package: 29.8kg
Maximum Take-off Weight: 35kg
Payload Capacity: 5 to 8kg

Flight Characteristics

Cruise Speed: 75mph/120kph
Maxium Speed: 100mph/160kph
Stall Speed: 25mph/40kph
Maximum Flight Time: 3 hours
Range: Restricted to Flight Time

Packaging Information

Shipping Dimensions of Package: 160cm x 51cm x 50cm
Package Weight: Volumetric Weight of 82kg

Here comes the new Mugin-4 Pro 4000mm H Tail Full Carbon Fiber VTOL UAV Platform. It is a shell but with infinite possibilities.

Link: https://www.muginuav.com/product/mug...-uav-platform/

Dimensions
Wingspan: 4000mm
Length: 1900mm
Wing Area: 90dm2
Payload Bay: 560mm x 210mm x 185mm

Weight and Payload
Empty Weight: 8.26kg
Empty Weight with ARF Package: 17.6kg
Maximum Take-off Weight: 25kg
Payload Capacity: 6kg

We are always listening to what our customers say, and make the improvements accordingly to meet what our customers needs. The Mugin-4 Pro 4000mm is designed based on the Mugin-2 Pro 2930mm. With the same fuselage, but the winspan has been enlarged from 2930mm to 4000mm. The longer winspan means the cruise speed will be reduced, and the flight time will be increased.

The same to Mugin-2 Pro 2930mm, the new Mugin-4 Pro 4000mm is made with full carbon fiber. Much stronger and durable than the fiberglass versions.. This UAV platform is made in mold to make sure the replacement parts are the same.

Mugin Pro are the aircrafts with the vertical take-off and landing (VTOL) function that can hover, take off, and land vertically. No runway needed and much easier to save crash comparing to the standard fixed wings.

The DLE120 now can be with 80w or 180w power generator system. Please let us know which version you would like.

Product link: https://www.muginuav.com/product/dle...erator-system/

Power generator systems designed to supply 14V 80W or 180w power for equipment inside or integrated with UAV. For long endurance UAV, power supply is very important for all the equipment inside. Complete DLE120CC UAV engine includes complete engine hardware, and power generator system. (Production time: 5 days for pre order only)

Twin-cylinder power and efficiency

The DLE-120 delivers 50 pounds of static thrust more than enough power for intense 3D maneuvers. Twin opposed cylinders reduce vibration and engine wear and increase performance. Mufflers, standoffs and electronic ignition boost performance even further. The DLE-120 delivers the most punch at the lowest weight and the lowest price of any engine in its class. Pick up the DLE-120 and fly with performance confidence.

Performance Data:
Power: 12hp at 7500rpm
Idle: 1300rpm
Static Thrust: 26.5kg at 100 Meters 23.5kg at 1800 meters
Displacement: 120cc
Bore and Stroke: 47mm x 35mm
Compression Ratio: 10.5:1
Engine Weight: 2310 gram
Mufflers : 220 gram
Ignition: 170 gram

Specifications
Fuel: 2C Regular Gasoline mixed 30:1 – 40:1 (Mineral based for break-in, 40:1 quality synthetic thereafter)
Propeller: 27×10, 26×12, 27×12, 28×10 (2 Blade), 25×12;26×10(3 Blade)
Ignition Battery: 4.8 – 8.4v (max) >= 1200mah
Replacement Spark Plug: NGK CM6 or equivalent
Plug Gap: 0.018″ to 0.020:
Installation Torque: 7 to 8 ft-lbs

DLE120CC 80W Generator parameters:
1700 RPM Output 12V 2.5A
2500 rpm output 13V 5.5A
3000 rpm output 14V 6A

DLE120CC 180W Generator parameters:
1700 RPM Output 12V 3A
2500 rpm output 134V 12A
3000 rpm output 14V 13A 180W