Wefinance01's blog View Details
Posted by Wefinance01 | Dec 13, 2015 @ 03:27 PM | 7,022 Views
I have built a few of these in the past. This build will feature scale intake made from balsa wood and the retract will be at scale location. I just hate the way the stock angle looks too cartoonish so this will be appropriate for my taste. I will also redo the main landing gear as close to scale with available parts on the market without breaking the bank.
Posted by Wefinance01 | Nov 08, 2014 @ 01:20 AM | 8,124 Views
Lots of memories building and flying these planes.

Version 2 Flying Mix w/Music & more landings (1 min 19 sec)

HD_37% Pilot Rc Sbach 3rd Flight (7 min 0 sec)
...Continue Reading
Posted by Wefinance01 | Nov 06, 2014 @ 09:03 PM | 9,771 Views
I picked up this LX A10 twin 70mm this week. This will be my third build of this A10 ( 1st one modified with flaps and CS10, 2nd one standard build with minor mods for a friend, and this one. The following mods will be done on this build:

1) reinforced outer wings and inner wings with carbon fiber arrow.
2) reinforced center fuse for strength and durability.
3) installed custom rebuilt freewing euro nose gear and mains with 3" wheels
4) modified nose gear bay for offset landing gear scale location on both mains and nose.
5) CA molded gear doors.
6) balsa ca hardened fuse winglets.

Quick Connect for the wing:



Pictures with explanation will be added as progress is made. After maiden, will switch to CS10 and TGY 2855-2100kv motors at 5-6S battery.

This one will be interesting to use also at 1900KV with the CS10 unit at 6S battery will lower amp draw.