DJI Links
DJI Phantom 4
http://click.dji.com/ewNB7_KlW2SdbyRy?pm=link&as=0001
DJI Phantom 3
http://click.dji.com/ewNB7_KlntMl6jMw?pm=link&as=0001
DJI Inspire 1
http://click.dji.com/ewNB7_KlixhKtwvR?pm=link&as=0001
Please Note: As with all my own blog post all links may be affiliate links and i may receive a small commission on any purchase bought through them , if you wish to support me then then are there otherwise you can navigate directly to DJI's website, thank you.
Please See DJI for up to date firmware information
Please Note FW V1.4 onwards does not contain a controller update you need to use V1.320 to update the controller that was the latest build. [/B]
There is a LOT of confusion around controller in this update, please see below to see what you need to do regarding the update
There are 2 versions of the P3 controller, Model GL300A and GL300B, the Model is written on the rear of the controller next to the DJI logo.
GL300A : Up to FW 1.3.20 it could be updated via the USB port, Once you installed V1.320 future updates will be via the DJI Go App.
GL300B, Can only be updated via the DJI Go App, Anything before 1.3.20 is not relevant as there was no update other than via the App.
If you have the GL300B update is via the App only, No further action is required.
GL300A ONLY
If you are currently on 1.3.20 then all future updates are via the DJI Go App.
If you are on V1.1.9, V.1.2.6, 1.2.8 you need to
...Continue Reading