scousethief's blog View Details
Archive for March, 2017
Posted by scousethief | Mar 28, 2017 @ 05:29 AM | 11,104 Views
Eachine VR D2 Pro 5 Inches 800*480 40CH 5.8G Diversity FPV Goggles w/ DVR Lens Adjustable



So , my trusty Quanums are starting to get a little "tatty" which is a shame as they perform flawlessly , with the cost of replacements in mind i have been looking around for something to replace them with, the goggles Two are an obvious choice but realistically atm i dont need a 1080p screen and i want something with a DVR, i know i can solder in the DVR to the G2 but it would mean cutting the case, however , these popped up today. which i am considering, they may just fit my fat head

Specification:
Brand name: Eachine
Item name: VR D2 Pro FPV Goggles
Screen size: 5 inches
Screen resolution: 800x480
Frequency channel: built-in 40CH 5.8GHz receiver
Battery : 2S 7.4-8.4V Lipo battery
Battery work time: 2.5-3 hours
Operating current: 600--680mA
Receiver sensitivity: -95dBM
Antenna connector: RP-SMA
DVR Max Support: 64G TF Card
Goggles weight: 285g (without antenna)
Antenna weight: 29 g (Flat: 13g, mushroom: 16g)
Dimension(mm): 150 X152 X96 (without antenna and antenne mount)

Features :
Upgraded Receiver, more sensitive.
Auto search, you can search all frequencies around or select your own frequency to avoid interference
Add the power indicator function instead of the built-in buzzer, you can check the power on displayer directly.
With white noise and snow screen
Dual receiver to get strong and steady signal
Support Lens Adjustable
Support upgrading
Built-in DVR function, record every wonderful moment and play back
With comfortable face sponge
With accurate capacity, 7.4V 2200mAh Lipo battery consists of 2 x 18650 battery
Support one key into power saving mode


Package Included:
1 X VR D2 Pro FPV Goggles
1 X Mushroom antenna
1 X Flat antenna
1 X 7.4V 2200mAh Lipo battery
1 X Charger
1 X User Manual







Posted by scousethief | Mar 20, 2017 @ 06:55 AM | 11,310 Views
4-in-1 BLHeli - S 20A ESC Electronic Speed Controller $16.38 / £13.13



No Bec but for the price this is a pretty good deal for a 130-180 sized quad build

Specification:
BEC: no
Processor: EFM8BB21F16G
Firmware: BLHeli - S
Continuous current: 4 x 20A
Burst current: 4 x 25A, 5 seconds
Driver: new-generation 3-in-1 MOSFET driver
Power supply: 2 - 4S LiPo / 2 - 4S HV LiPo
4-in-1 BLHeli - S 20A DShot ESC uses the latest digital signals for more accurate control


Micro F3 with 5V 2A Bec
http://www.gearbest.com/flight-controller/pp_619865.html $16.21


Main Features:
- STM32F3 microprocessor, low-noise MPU6000 connected via SPI
- With built-in PDB, BEC, LC filter, it is easy to use and performs well
- Tiny but powerful, it supports up to 50A input current and 6 motors
- BetaFlight preloaded, CleanFlight support, one-key to boot

Specifications:
Voltage input: up to 21V ( 5S LiPo )
Max. current: 50A
BEC: 5V 2A
Receiver input: PPM 5V
Battery monitoring: yes
Size: 27 x 27 x 7.5mm
Mounting hole: 20 x 20mm
Weight: 2.7g





F3 Flight controller **dirt cheap**
F3 Flight Controller
...Continue Reading
Posted by scousethief | Mar 16, 2017 @ 06:05 AM | 10,360 Views
SPC 90S 90mm FPV Racing Drone BNF with Omnibus F3 OSD Blheli_S 10A 5.8G 48CH 25mW VTX



The PERFECT micro ? Video antenna at the rear , 2-4s , F3 , choice of receiver , penta-props AND 25mW to keep those boring authorities away

Now, how will this compare to the Emax Baby Brushless ??

Specification:
Item Name: SPC 90S 90mm Mini FPV Racing Drone
Model: SPC 90S
Wheelbase: 90mm
Material: 3K Full Carbon Fiber
Size: 73mm*85mm*23mm
Weight: 56g( battery not include)
86g ( Including battery)
Motor: 1104 7500KV brushless motor
ESC: 10A BLHELI_S 4 in 1 ESC
Propeller: 50mm 5-blades propeller
Receiver: DSM2 Receiver/ Frsky Receiver/ Futaba Receiver (optional)
Camera: 600TVL 1/4 CMOS Camera PAL/ STNC Switchable
VTX: 5.8g 25MW 48CH FPV transmitter
Battery: 7.4V 450mah Lipo battery (JST 2P Connector)

Omnibus F3 Flight Control:
Flight controller: Omnibus F3 Integrated with OSD Built in 5V@1A BEC
Processor: STM32F3CCT6 MCU
Sensor: SPI Sensor MPU6000
Size: 27mm*27mm*5mm
Mount hole: 20mm*20mm
Lipo: 2-4S
Supports popular receivers such as SBus, PPM, DSMX.
Buzzer, programmable LED, voltage monitoring, HLHeli ESC
Weight: 8g

10A Blheli_S 4 In 1 ESC:
Size: 27mm*27mm*5mm
Mount hole: 20mm*20mm
BB2, 48MHZ Chip
Lipo Battery: 2-4S
Con. Current: 10A
Peak Current: 15A (5S)
BEC: NO
Programming: YES
Support D-Shot, Oneshot, rotation directions
Weight: 6.3g


Package Included:
1 x SPC 90S
1 x 600TVL camera
4 x 1104 KV7500 Brushless motor
1 x DSM2 receiver Or Frsky Receiver Or Futaba Receiver
1 x Mini F3 OSD Flying Tower
4 x 50mm propeller
1 x 5.8G 25mw image transfer
2 x 7.4V 500mAh battery




Posted by scousethief | Feb 28, 2017 @ 08:00 PM | 10,361 Views