Posted by racedouge1 | Yesterday @ 11:21 PM | 519 Views
I don't know who Mr. Xing is, But he builds one nasty motor. I like building with balsa and using cheap quad motors to power them. My moulded red Demon has a F-80 T-motor on 8s, Just over 200 Mph and faster in a dive. This xing motor is awesome, Going to build a fuse for this elliptical wing and a 2806.5 1300Kv Xing with 7x4 APC on 6s. That's 200 watts more than the demon. Impressive motor for thirty bucks. I have the 1300 Kv xing on it's way to see what it will do on 8s.
Posted by IntroSpec | Yesterday @ 08:26 PM | 909 Views
I've started to add some layers to the face and body. I tend to start with the leather objects first like the helmet, gloves and boots. I'm still working on a color for his flight suit. I often experiment with a bunch of color schemes until I find one I like. Here are the latest pics ...
Posted by Taxus812 | Yesterday @ 08:00 PM | 1,030 Views
My very first RC airplane was a Super chipmunk ARF. I remember having save money and walked into a Hobby shop in long meadow MA in 1989. I was a young kid, had no idea what I needed and unfortunately the shop was happy to load me up and send me on my way. Obviously it was not a good first plane and I had no chance in hell of being successful. About the most I ever got to do with it was taxi around the high school football fields. Fortunately for me A member of Hamden County Radio Control club of South Hadley Ma found me and helped me get on the right track. So I built a PT40 (I did a horrible job but it flew) gutted the chipmunk and learned to fly. The chipmunk got put in the rafters. I started out in life and it and just it disappeared over time never to be flown.

Fast forward to December 2019. I was telling my wife about the plane I never flew and always wanted to. During the discussion I said it may be cool to find a Carl Goldberg Super Chipmunk Kit because well, I have a bit more experience now . How cool would it to be able to get a Chipmunk and fly it right. I also said they are getting harder and harder to find now that they were no longer in production. Well the little turd, she got with a buddy of mine and found one. I knew she was hunting but I thought she was unsuccessful. She gave it to me for a Christmas gift.

The kit was complete and in super shape. The kit it was Die Cut and I have some of the forms dating to 1989. I checked with the AMA...Continue Reading
Posted by jmxp69 | Yesterday @ 06:59 PM | 1,155 Views
First flight done, no spare parts. So that's a start:

Dynam Waco Red RC Plane Maiden - Bonus: Drone Footage (8 min 12 sec)

Posted by scousethief | Yesterday @ 01:38 PM | 1,671 Views

Following on from the previous P-51 we have another gyro stabilised micro plane from Eachine/Volantex, this time the USAF F-22. Things are a little different this time with a direct drive pusher prop ( micro edf at this price point is a little too much to ask i think ) and a removal of the rudder in favour of a locked twin elevator ( the two servos control an elevator each but cannot be controlled independently FSSR )

...Continue Reading
Posted by ron stahl | Yesterday @ 10:45 AM | 2,074 Views
Hello all, just wanted to give you a quick background about myself. I'm sixty years young now and a lifelong modeler. I have built everything that flies from indoor rubber power to full scale EAA planes. I've had a 35 year career in the UAV industry at AAI/ Textron systems working in the design and development lab for UAV's. I also had a 15 tenure at GPA hobbies which I purchased with two of my friends but due to my wife's declining health I sold my interest back to the widow of the former owner. Turbine jets and EDF planes are my main interest now but still build from scratch many sizes of models but have stopped flying glow power due to the costs of fuel locally and now use gas or electric power for my smaller planes.
I also have a group of friends that I travel with to swap meets and we have been liquidating the estates of friends so you might see some things up for sale in the fuel engine section and kits. We go to the Westminster Md., Lebanon Pa., and Hamburg Pa. Swap meets each year. Since the advent of the Internet our yearly trips to the WRAM and Toledo Shows have stopped as of four years ago.
Posted by TMacFPV | Yesterday @ 09:30 AM | 2,267 Views
X-Frame Racer with HD Video Camera! All parts listed! Today I build and fly my latest Micro FPV Race Drone with the Caddx Tarsier V2 HD camera that allows me to capture HD video AND at the same time have great FPV video real-time during flight with minimal latency. I've gone to great lengths to find the lightest weight dual-stack X-frame for this build. If you know of another one, please share it with all of us!
Micro FPV Race Drone Build (11 min 20 sec)

Posted by Tazkiller85 | Yesterday @ 06:02 AM | 3,007 Views
Yep Les Amis,
Bienvenue au Nouveau TazAtelier ! Je profite de cette petite prsentation de la nouvelle Wltoys 144001 pour vous prsenter galement le nouveau TazAtelier ... J'apporterai certainement des modifications et des arrangements aprs quelques essais de cette configuration et j'attend bien sur vos remarques et commentaires pour m'y aider. Pour revenir ce nouveau petit Buggy, mes premires impressions sont excellentes, il va largement surpasser la A959 pour un prix identique. Mieux finie, mieux quipe, un pilotage amlior, bref, une norme amlioration premire vue ! Restera plus qu' tester sur le terrain ... Bon Film Tous et Merci de votre soutien .

WLTOYS 144001 Buggy - Déballage Présentation - Le TazAtelier II ... (12 min 36 sec)

NOTATAZ : 19/20 1re Impression avant test !

Niveau : Dbutant, Amateur
Les + : Petit prix, Chssis Alu, Amortisseurs performants, Bien conue ...
Les - : A voir aux tests ...

Les produits prsents sont visibles ici (en cliquant sur ces liens vous soutenez ma chane) Merci vous :

- Wltoys 144001 1 batterie ( Coupon BGBF144001 ) 65 :
- Wltoys 144001 2 batteries ( Coupon BG1401TW ) 80 :
- Lipo 2S 1500mAh :

- Lampe Loupe TazAtelier :

- TOUTES LES PROMOS ET COUPONS BANGGOOD 2019 (remis jour rgulirement, gardez ce lien en favori ou raccourci pour vos achats sur Banggood ) : http://...Continue Reading
Posted by Dynam RC Detrum | Yesterday @ 03:38 AM | 3,255 Views
Hey man, maybe you know Dynam,but havn't heard our branch Brand- Detrum Tech. She seriously on electronic remote control systems. Now introduce her transmitter :

-Adopting 2.4GHz direct sequence spread spectrum (DSSS) and multiple frequency-hopping spread spectrum (FHSS) technology, the R/C system has high receiving sensitivity and strong anti-interference capability, can support a stable operating for more than 1km on the ground and more than 1.6km in the air.

- Adopting wireless chips, with extended power amplifier (PA) and low noise amplifier (LNA) can extremely improve the system output power and receiving sensitivity.

- Using all-band antenna on transmitter. The transmitting efficiency is greatly improved.

- Can experience a smooth flight operation by using the 4096 section precision sticks and selecting four stick modes.

- Achieving 2.6ms response time, even all channels it acts synchronously.

- USB upgrade function always keeps your GAVIN-6C the latest program.

- Support Fail Safe function, which could predefine the servo position by transmitter when receiver out of control.

- Trainer function make a skilled instructor can teach a student with fly skills.

- Can be used to set the programmable item of the flight controller for airplane.

USA buy it -
My mail [email protected]
Posted by jmxp69 | Yesterday @ 12:09 AM | 3,915 Views
The C-47 Skytrain is ready for maiden. Here's how the build went:

Dynam C-47 Skytrain Build Review (13 min 23 sec)

Posted by CaseySP | Jan 17, 2020 @ 07:29 PM | 4,280 Views
This is how I (hopefully) increase safety by splitting power supplies. Using the otherwise unused ESC BEC power for non-essential servos to preserve power for the RX and essential controls, eg should the retracts jam.
Posted by simages | Jan 17, 2020 @ 06:08 PM | 4,612 Views
The C-3 design was derived from the Aeronca C-2. Introduced in 1931, it featured room for a passenger seated next to the pilot. Powered by a new 36-horsepower (27-kilowatt) Aeronca E-113 engine, the seating configuration made flight training much easier and many Aeronca owners often took to the skies with only five hours of instruction. Llargely because of the C-3's predictable flying characteristics. Both the C-2 and C-3 are often described as "powered gliders" because of their gliding ability and gentle landing speeds. It was almost impossible to make a hard landing with an Aeronca because the pilot could easily see his wheels approach the runway. This highly prefabricated kit belongs in the "super scale competition" models category. Once built, the airframe is extremely light and clean but still able to withstand the high loads and stresses associated with aerobatic flight. The manufacturer uses the latest construction techniques including Laser CNC cutting to achieve high strength and low weight. Each part and every detail are meticulously made.

Wingspan: 51.25"
Length: 28.75"
Weight: 25-26 oz. (710-740g)
Channels: 4,5

Will start soon.....

Build Thread HERE
Posted by DutchRC | Jan 17, 2020 @ 12:43 PM | 5,307 Views
Halloa people

recovered from the onslaught of calories over the last month I hope?

The Diatone / Mamba quad stacks have amassed a Great reputation over the last years. They have proven to be both affordable and good performers.. Don't get me wrong: even the best stacks Can fail.. I have at least 10 quads with Mamba stacks, and over the last year I have had 1 4-in-1 ESC fail after a few flights..

AND.. they just released several updates / upgrades! The first one I got my hands on is the F722s flight controller + F50 Pro ESC stack

Link to it: Mamba F722S + F50 Pro stack

Lets have a look at both the stack and how it is different from the 2019 version

Diatone Mamba F722S + F50 Pro 6S STACK REVIEW (10 min 38 sec)

Specifications of the stack:
ESC size: 36.5 x 46.5 mm
FC size: 37.9 x 37.9 mm
mount: 30.5 x 30.5 mm mounting pattern
continuous A: 4 x 50 = 200A
BEC: 5V 2A & 9V 2A
peak A: 4 x 55 220A (10 seconds)
Voltage: max 6S ( 7.4V - 25V)
protocol: Dshot300 - 1200
ESC processor: 32 bit
stock BF version: 3.5.5
OSD: yes
flash: yes, 16 MB
Posted by jmxp69 | Jan 17, 2020 @ 10:37 AM | 5,658 Views
I put together the Dynam Waco in this video. Piece of Cake!
Dynam Waco RC Plane Build Video (36 min 47 sec)

Posted by GroundControlRC | Jan 17, 2020 @ 09:12 AM | 5,822 Views

DustOff #9 - "Glue & Fly Series" F22 Micro V2 - Rocket Ship to the Moon ;-)

Here is a link to the Video:

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #F22Micro

Wind was 3mph-5mph (5kmh-8kmh) again and I had some Trim work to do after Centering my Servos.
I had not know about Sub-Trim when I first setup this Micro Parkjet.
After Centering my Servos with Sub-Trim it was time to Trim it out again.
Now, it's all Trimmed out and flies nice and level at cruise speed and the Rolls are completely Axial ;-)
I have absolutely no Trim in the Transmitter at all, it's all Mechanical Trim ;-)

The skill level needed for this Parkjet is Intermediate to Advanced.
Intermediate setup is a 2S Power System with 10 points more Dual-Rate than on a 3S Setup.
Advanced setup is a 3S Power System.
It's very docile on a 2S Power System, Fast & Aerobatic with a 3S Power System.

The GFS F22 Micro V2 Plans are available for Patrons!

The GFS F22 Micro V1 Plans are available to Youtube Subscribers!
Here is a link to the Plans & Docs:
You're going to love it ;-)

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Here are links to the components:

Racerstar Racing Edition BR1407 3500KV 2-3S Brushless Motor
...Continue Reading
Posted by Eric Zhu | Jan 17, 2020 @ 02:43 AM | 6,676 Views
AGFrc 19KG Digital Low Profile Servo High Torque Programmable Full Metal Gear CNC Case for 1/10 1/8 RC Models, Control Angle 180

The AGFrc A50BHL RC servo is just like AGFrc A80BHSW 36KG Programmable Waterproof Servo which is a updated version with addition like programmable design. This new design servo can be programmed by the AGF-SPV2 servo programmer (included) to change the torque, speed, angle, and other parameters of the servo what you want, even 360 continuous rotation control, changed to be a multi-circle servo or a winch servo is possible. It's really convenience for users to DIY the parameters of their servo according to the situation.

Moreover, the mannufacuter will UPDATED the firmware of the A50BHL servo, users can download the updated file from the manufacturer's official website to updated it throngh the AGF-SPV2 servo programmer in the future.

Name: A50BHL-8.jpg
Views: 0
Size: 762.5 KB

  • AGFrc high quality digital low profile servo can be common use in remote control climbing cars, 1/10 on road, off road, truck, planes, mechanical arms, and others remote control toys.
  • Upgraded Version, this servo is PROGRAMMABLE by AGF-SPv2 servo programmer to change the torque, speed, angle, etc.
  • Good idea for the remote control toy enthusiasts who want to DIY their RC toy, and also good choice for university professors and students who are interested in developing software for robot parts. Its also a good choice for some of the industrial device applications.
  • CNC top and middle
...Continue Reading
Posted by kopterheld | Jan 17, 2020 @ 02:31 AM | 6,777 Views

This is an adapter to connect an analog diversity module to the DJI Digital FPV goggles outside by cable. Clean solution, but you should install the current DJI update to at least v01.00.02.00 so you get very low latent times up to 20ms. So you don't need any other analog FPV glasses anymore !!
A video module is simply plugged in here and you can fly analog tiny whoops, toothpicks.


Video - DJI FPV goggles with analog Module - RX Port (DE) with EN subtitle
DJI FPV Brille mit analog Modul RX Port (3 min 29 sec)

...Continue Reading