Posted by Carmen Chen | Today @ 05:02 AM | 32 Views
Flytec V500 500M Control Distance Upgrade Version of 2011-5 Bait Fishing RC Boat with Full Scale Controller

The upgraded version of the 2011-5 bait fishing baot is equipped with a full-scale gun remote controller, full-scale throttle and full-scale steering functions, the bait fishing boat is more flexible and convenient to control. 2.4GHz remote control frequency, remote control distance as high as 500 meters, less interference in water, remote control is more stable. This product is equipped with backpack, making it easier to carry around.


Specifications:
Remote controller: 2.4Ghz
Color: Black
Material: ABS & Electronic Part
Charge Time: 10-12 hours
Control Time: 2-24 hour
Control Distance: 500m
Speed: 5.4KM/H
Controller Battery: 4*1.5V AA Battery (Not Included)
Battery: 7.4V 52000MAH
Product Weight: 2060g
Product Size: 50*27*20cm

Product Selling Point:
1. ABS engineering material is molded from the main body of the hull
The boat body of the hull is made of ABS engineering material at one time.It has superior impact resistance and wear resistance, is not easy to wear, has strong scratch resistance, beautiful atmosphere, strong and stable, strong wind and wave resistance.
2. Large capacity rechargeable battery
The lithium battery is faster to charge and has a larger capacity. The battery is placed in the middle of the hull, which can achieve a good balance and stability, and has better performance (Note: 3S battery can be used)
3....Continue Reading
Posted by CDX1 | Today @ 04:43 AM | 29 Views
Does anyone know if parts from the samyara x5c are compatible with the MJX x400. ea( upgraded props and motors.
Posted by USMC1968 | Today @ 04:02 AM | 37 Views
Hello anybody/everybody! Ive had this drone for a little over a year and it is my first. The first few flights went well but after a few months of not using it, I now have a problem. I cant get a satellite lock. Remote shows 16, give or take, but error lights blink 2 short/1 long on the quad and motors run but it will not fly. With no manufacturers support, I bought a new gps module online but still have the same problem. Hobby shops in my area are few and far between and wont attempt to help me because they dont sell this quadcopter. Can someone PLEASE help? I also have a Mavic Pro but Id like to fly this one again. Thanks!
Posted by jmxp69 | Yesterday @ 10:34 PM | 97 Views
Video of the Freewing BAe Hawk Maiden. No real drama. Just a little trim, and a few approaches before landing.

Freewing BAe Hawk 70mm EDF Maiden Flight (15 min 21 sec)

Posted by RCvertt | Yesterday @ 05:45 PM | 137 Views
Just saw this in the paper today.
Posted by jricchio | Yesterday @ 03:40 PM | 185 Views
Purchased a Multiplex Funracer. Painted her up as "The Galloping Ghost".
Decals by Callie.
Posted by GroundControlRC | Yesterday @ 09:40 AM | 221 Views
Review - GOTECK GS-9018C Brush Micro Servo 9g 1.5KG



Here is a link to the Video:
https://www.youtube.com/watch?v=60Vgn6yD7_M

This is an Analog Servo I plan on using in my future Mini Parkjet Builds.
It's very inexpensive and has some good field testing from e3Scott in our "Glue & Fly Series" F-22 Mini V3.
So far, they have performed well.
I will be doing the Field Testing of this Servo in our New "Glue & Fly Series" F-22 Mini V2.5
I have provided a link to e3Scott's Youtube Channel Below.

Here is a link to this Servo:

GOTECK GS-9018C Brush Micro Servo 9g 1.5KG
https://www.banggood.com/GOTECK-GS-9...47791920140372

Here is a link to e3Scott's Youtube Channel:

https://www.youtube.com/channel/UCfP...jP9Kjv84ajANVg


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/
Posted by Tazkiller85 | Yesterday @ 05:27 AM | 277 Views
Yep Les Amis,
Le FPV, tte baisse !!! Pour certains inutile et pour d'autres INDISPENSABLE ... Voici le DOCK KING de chez Furious FPV . La qualit des produits Furious FPV n'est plus prouver, a c'est clair. Avec cette station pour rcepteur 5.8gHz, vous serez non seulement libres de vos mouvements de tte mais pas que ! Les performances des rcepteurs Furious coupls ce DOCK KING vous apporteront galement une multitude d'options intressantes. L'enregistrement direct automatique, l'OSD intgr reglable, les niveaux de rception OSD et LEDS externes (recherches d'engins gars), le mode race ou entrainement, l'application bluetooth, ETC ... Bref, vous l'aurez compris, il faudra plus qu'une vido pour tester toutes ses options, en attendant, cet accessoires rendra bien des services au fanatiques de FPV ! Pas indispensable c'est sur, mais perso, je trouve a Excellent ! Et je n'ai pas abord le ct scientifique, car avec cet appareil, vous loigns les ondes de votre cerveau, mme si certains ne s'en servent pas ! lol ... Bon vol Tous ...

DOCK-KING FURIOUS FPV - Review Déballage et Set Up - Résultats du Concours ! (26 min 2 sec)


NOTATAZ : 18.5/20 LIBRE de tes mouvements (de tte) !!!

Niveau : Dbutants et Confirms
Les + : Utile, Simple utiliser, Options intressantes .
Les - : Un investissement certain quand mme ...

Les produits prsents sont visibles ici (en cliquant sur ces liens vous soutenez ma chane) Merci vous :...Continue Reading
Posted by xinte | Yesterday @ 02:56 AM | 299 Views
Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone PNP BNF 25mW VTX 700TVL Camera

https://www.xt-xinte.com/Happymodel-...a-p582849.html

Presale,will be ready for ship during May15th -May 30th




Specifications:

Brand Name: Happymodel

Item Name: Sailfly-X 2-3S Micro FPV racing drone

Wheelbase: 105mm

Size: 95mm*95mm*50mm(without propellers)

Weight: 35g(without battery)

Weight:60g(with Original 3s 300mah Lipo battery )



Features:

Crazybee F4 PRO V2.1 AIO Flight controller 2-3s Lipo Compatible

The lightest 1102 brushless motor only 2.7g with double ball bearings

Light ,Powerful and smoothly

AIO 5.8g 40ch 25mw vtx / 700tvl camera with smartaudio

2mm carbon fiber frame with TPU 3d-printed canopy

Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)

Frsky version support both NON-EU and EU-LBT Frsky transmitter(EU-LBT need to update firmware to Betaflight 4.0( release date :2019-4-11)

Flysky version support both AFHDS and AFHDS-2A protocol transmitter

DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter

No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..

Full telemetry function ready (Frsky and Flysky version support)

Real Bind and Fly version

Compatible both for 2s-3s Lipo/LIHV
Posted by xinte | Yesterday @ 02:52 AM | 302 Views
iFlight SucceX F4 12A Micro 2-4S Flytower Fly Tower Built-in OSD 200mW VTX 16*16MM Hole for FPV Racing Drone Quadcopter DIY Models

https://www.xt-xinte.com/iFlight-Suc...s-p583184.html

Specifications :

iFlight SucceX Mirco F4 fly tower, from the wing of the xing equipment. The Mirco F4 is a new, streamlined, three-layer tower structure that is highly integrated with new features, optimized for internal circuitry, and simple layout for a cleaner and cleaner wiring.

This is an F4 flying tower developed for small aircraft with a hole of 16*16. The pin is connected to facilitate the installation and maintenance of the flying hand. The flight control performance of the F411 microcontroller and the MPU6000 gyroscope are very good. Built-in programmable RGB LED interface, external LED, set LED color, function, status. The built-in OSD chip can monitor the flight status of the flight at any time. The overall cooperation with the image transmission can change the image transmission point, power, flight control parameters, etc. using IRC Tramp.

12A's four-in-one ESC pad semi-extended structure, does not take up space, and is stable, supports 2-4S battery input, lasts 12A current, BLHELI_S firmware, supports Dshot 600 and other protocols.

Figure transmission power PIT/25/100/200. Can use IRC Tramp to change the map frequency point, power, flight control parameters and so on. PIT mode allows you to plug in safely without disturbing other flying aircraft.

iFlight SucceX Mirco F4 fly tower, let your small aircraft also have strong performance!

Note: This flight control firmware is matek f411, only supports SBUS and DSM receiving protocols, does not support PPM protocol and does not support brush 4.0 firmware. Please pay attention to the connection wiring diagram when wiring!
Posted by xinte | Yesterday @ 02:47 AM | 312 Views
iFlight SucceX F4 TwinG Flight Controller + SucceX 50A ESC 2-6s BLHeli_32 Dshot1200 4-in-1 Flytower Flight Tower for FPV Racing Drone Quadcopter DIY Models
https://www.xt-xinte.com/iFlight-Suc...s-p583302.html
Specifications :

FC Specifications
MCU:STM32F405R6T6
IMU:Twins IC2689,Twins Gyros built-in(SPI)
Baro:BMP280
OSD:AT7456E
Blackbox:Blackbox logging device
5X Uarts(1 2 3 4 5)with build-in inversion
8X Dshot/Proshot/Oneshot output
8X individual ESC power/ signal pads
1X Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
Smart audio & Tramp VTX protocol:YES(IRC Tramp)
WS2812 led Strip:YES
Beeper:YES
PDB Specifications
Input:2-6S(5-36V)
BEC:5V/3A cont


FC Firmware
Betaflight/INAV
Target:STM32F405
FC:IFRC/IFF4_TWIN_G(STM32F405)


Physical
Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm
Dimensions:36*36mm
Weight:6.3g
SucceX 50A 2-6S BLHeli_32 Dshot1200 4-in-1 ESC


Features:
8 layers double-sided PCB board;
4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;
32bit FO51K86 MCU, 48mHz maximum clock speed;
TDK MLCC Low ESR ceramic capacitors;
Top grade NTMFS5C430NL MOSFET;
Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection


Specification:
Dimension: 43*39mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Weight:14.4g
Supports 2-6S lipo input
STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
Current sensor: Yes
BEC: No
Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
Target: iFlight-BL32-4IN1


RECOMMENDATION:
No additional capacitor needed up to 5S!
To encounter back EMF and ensure the longevity of your electronics, min. 220uF Cap 35V for 4-5S, 50V for 6S on your main lead!


Package included:
SucceX F4 TwinG FC+ SucceX 50A 2-6s BLHeli_32 Flytower
Posted by Bill M - RC | Apr 23, 2019 @ 10:47 PM | 330 Views
Hi fellow rc pilots & rc enthusiasts

NEW KINGKONG/LDARC TiNY GT7 2019 V2 review. This new release KINGKONG/LDARC TiNY GT7 2019 V2 2S FPV Racing Whoop Drone with Betaflight F3, 10A Blheli_S Escs, 800TVL Cam, 5.8Ghz 25mW VTX, Smart OSD v2 review includes unboxing, inspection, setup, betaflight settings, Smart OSD settings and an outdoor test flight. I will post a separate video of a test flight on an indoor racetrack.

You can get this KINGKONG/LDARC TiNY GT7 2019 V2 2S FPV Racing Whoop Drone here now: http://bit.ly/2U6MUGa

Use this limited offer coupon: KINGKONGGT7
for a discount on this too
expiry date: 2019-05-30


NEW KINGKONG LDARC TiNY GT7 2019 V2 2S FPV Racing Whoop Drone review (24 min 34 sec)

Posted by 1000MPH | Apr 23, 2019 @ 05:20 PM | 446 Views
Got a couple of pretty special planes this weekend. Been drooling over this plane for 6 long years. Good things come to those who wait.
We were hoping to get them all finished for an international furball but thought a careful build for a record attempt would be more prudent.
These were so hot off the presses that Tim didn't have time to complete his usual cleanup and detailing. That's actually a good thing so I can give them a thorough inspection and gain a little insight on what it takes to make these puppies.
I carefully sanded the flashing off of the fin on one of them today. It's a beautiful fit to the wing.
Thinking about using the KST HS-320 recommended by top pilots but it's an HV servo. Hmm, where to find 14MM Li-Ion battery packs.
Posted by Merch | Apr 23, 2019 @ 04:35 PM | 449 Views
https://www.banggood.com/FUNSKY-913-GPS-5G-WiFi-FPV-with-1080P-HD-Camera-Altitude-Hold-Mode-Brushless-RC-Drone-Quadcopter-RTF-p-1431598.html


At My local Depot,will be here any day now for review.







FUNSKY 913 GPS 5G WiFi FPV with 1080P Camera Altitude Hold Mode Brushless RC Drone Quadcopter RTF

Specifications:

Aircraft
Takeoff Weight 209g
Dimensions 205*185*55mm
Color Yellow, White (Optional)
Diagonal Distance 170mm
Motor Size 1306 2700KV Brushless
Max Ascent Speed 2 m/s in Sport Mode
1 m/s in Aerial Mode
Max Descent Speed 1 m/s in Sport Mode
0.8 m/s in Aerial Mode
Course Angular Velocity 200/s in Sport Mode
150/s in Aerial Mode
Maximum Tilt Angle 25in Sport Mode
15in Aerial Mode
Maximum Horizontal Flight Speed 13 m/s without wind
Max Service Ceiling Above Sea Level 4,000 m
Max Hovering Time 15 minutes
Operating Temperature 0-40℃
Satellite Positioning Systems Dual Mode GPS/GLNASS GPS
Hover Accuracy Range Vertical: +/- 1.5 m
Height: +/- 0.5 m
APP Control Distance 80m
FPV Distance 300m
Battery 7.7V 1500mah 11.4wh LiPo HV
Charger Input: 5V 2A
Output: 8.7V 1.5A
Charging Time 90 minutes
Remote Controller Antenna Band 2.4GHz-2.48GHz; 5.725GHz-5.825GHz
Transmitter Power (EIRP) 10db
Remote Control Power 0.1W ([email protected])
Control Distance 300m (No Interference, No Occlusion)
Battery 3.7V 350mah
Weight 110g
Camera Sensor 1/3" CMOS
Effective pixels: 5 MP
Lens FOV 115
ISO Range...Continue Reading
Posted by Ilovesoccer1999 | Apr 23, 2019 @ 03:53 PM | 431 Views
I'm just getting started with RC's and I was looking for some flight controllers that would last and be very versatile. I found the pixhawk hk32, but I was wandering if it was worth it to get the pixhawk 4.
Posted by LemonC | Apr 23, 2019 @ 03:22 PM | 420 Views
Betaflight 4.0 'Freestyle' stock settings (5 min 50 sec)


flippy spins on betaflight 4.0's stock freestyle settings. bouncy