Posted by Espo 7 | Today @ 09:18 AM | 15 Views
Hi, I'm looking to sell my Fatshark HDO. I have used maybe 5 times. They are like new. I've been using Dominator 3s because I like better than Hdo. I'm looking for $300.00. I want to buy Orqa or Hdo 2 but do not want to spend another 500 on Fatshark.
Posted by Wendyyyy | Today @ 06:33 AM | 49 Views
So many awesome products in HGLRC giveaway!

Join "HGLRC Official Group" on FB and find giveaway post to participate. 6 winners will be selected. Good luck!

From HGLRC webshop:
Top prize: Sector132 4K PNP x1
From post comment:
First prize: parrot132 PNP x1
Second price: FD435-VTX x1
Third prize: Sector132 frame kit x1
From LIVE video comment:
Special gift: hglrc cap x2

How to participate?
��[1 winner] will come from HGLRC webshop customers. The one who has cost most on HGLRC.com by Nov. 25, 2019 since our store opened , will win our TOP prize!
��[3 winners] will come from comments of this post randomly! To join the comment giveaway, you and your friends just need to 【comment and tell us your favorite product of HGLRC and attach a picture of it】.
��[2 winners] will come from comments of LIVE video! The two people who interact with us the most in the LIVE video will be chosen.

��Winners will be announced in HGLRC Official Group live video on Nov.26 10am (GMT+8).
Posted by Tazkiller85 | Today @ 06:03 AM | 36 Views
Yep Les Amis,
Hors normes mais efficace ! Je test enfin ce nouvel engin de chez Eachine, le LAL5. Une configuration électronique très complète, des moteurs impressionnants, un châssis résistant bien conçu et quelques accessoires améliorés (sangles, prise, TPU) , font que cet appareil sera parfait pour débuter en 5" ou pour les pilotes avertis. Déjà équipé d'une bonne caméra HD et d'une excellente caméra FPV, il vous permettra de rapporter de belles et impressionnantes images de vos sorties sans avoir à ajouter une grosse caméra HD. Pour faire court, après quelques petites vérifs et serrages, j'ai adoré le comportement de cet engin et le rendu des images. Je validerais déjà à 200€ mais je valide encore plus à 175€ avec le coupon remise ... Bon vol à Tous !

Eachine LAL5 - Review Test Démo - Un monstre bien équipé !!! (44 min 39 sec)


NOTATAZ : 18/20 Bien joué Eachine !

Niveau : Amateurs et Confirmés
Les + : Design original, Puissant, résistant, Bonne config, Réglage d'origine ok, Options Bluetooth, très Bon rapport qualité/prix (175€ avec coupon) .
Les - : Pas d'absorbeurs de vibration (Carte de vol) , Antenne VTX moyenne mais correcte .

- Si Vous voulez aider la chaîne avec un don (tous les dons servent à alimenter les vidéos en produits ou matériel ): https://streamlabs.com/Tazkiller85

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- Eachine LAL5 (...Continue Reading
Posted by LeonBlack | Today @ 03:39 AM | 64 Views
Most people often use the CNC wood routers to cut wood or acrylic. But CNC routers also can cut aluminum. Here are 3 tips to help you.

aluminum bits

1. Use Carbide router bits
Carbide-coated cutters can handle the high RPMs that you need for routing aluminum. Even HSS won’t be able to handle the job. Don’t forget to tell you feed and speed calculator that your bit is carbide-coated; it will give you more RPMs.

cnc Aluminum cutting

2. Feed and Speed Rates
Cutting Aluminum is different with wood cutting. This is why you need to calculate your feed and speed rates. The best way to do this is to use and online feed rate calculator.

aluminum router bits

3. Use Fewer Flutes
You may be used to using a four-flute cutter for your woodwork, however when you’re cutting aluminum, a three-flute cutter is your maximum. This will prevent overly large chips which can cause your router to jam. The fewer the flutes, the better. If you have 4 or more flutes, chips jam your flutes, and your bit breaks.

From the above, if you want cut Aluminum, a specialized CNC aluminum router bits are your best choice. We can supply router bit made especially for aluminum cutting. Top quality solid carbide, single flute upcut, specially designed for aluminum or aluminum composite panels milling. For more information, welcome to contact us.

RicoCNC is a one stop shop for CNC spares and tools, if any needs, welcome your inquiry.
Posted by Nick Akerson | Today @ 02:40 AM | 74 Views
According to a report by the Korean media on January 27, the South Korean government announced that it will put commercial drones into eight major areas, including small-goods transportation and high-rise building safety inspections, by 2020, and the first test flight will be launched by the end of February. The South Korean government also decided to establish a dedicated airport for drones by 2018.

According to a report by the Korean media on January 27, the South Korean government announced that it will put commercial drones into eight major areas, including small-goods transportation and high-rise building safety inspections, by 2020, and the first test flight will be launched by the end of February. The South Korean government also decided to establish a dedicated airport for drones by 2018.

According to the "UAV Commercialization Plan" issued by the Ministry of Land, Infrastructure and Transport of Korea, the eight areas designated by the Korean government include: cargo transportation, forest protection, coastal monitoring, land survey, equipment security inspection, communication networking, photography and leisure, and agricultural support.

In order to realize the commercialization of drone freight, the South Korean government will first try to let the drone carry small cargo of less than 5 kg. The goal is to ensure that the drone can deliver the goods to the designated location without errors.

According to the plan of the Ministry of Land and Resources of Korea, this year, Korean drones will be concentrated in the basic test phase. In 2017, they will be upgraded to advanced exercises such as night flight and remote control. From 2018, various types of transportation work will be carried out at low altitude. It will be fully commercialized by 2020.

In addition, the South Korean government has decided to expand the drone driving qualification education institution while establishing an airport for drones.

It is understood that the business forecasting company TealGroup expects the drone market to reach $11.5 billion by 2023.

https://mmcuavcompany.business.blog/
Posted by Catherine Chen | Today @ 01:07 AM | 92 Views
XT150 Connector Adapter Male Female Plug 6mm Gold Banana Bullet Plug

Rated voltage: DC 500V
Max. continuous current: 60A
Max. peak current: 130A
Contact resistance: 0.2mΩ
Connection material: brass, gold plating
Housing material: plastic PA
Operation temperature: -20℃ to 120℃
Usage Lifetime: 1,000 times Plug-in and Pull-out
Recommend Cable Spec.: 8AWG

Any question,Please feel free to contact me :[email protected]
Posted by c/f | Yesterday @ 10:20 PM | 145 Views
Repowa Crak 39 Velox 43
Posted by JENNIFERZHOU | Yesterday @ 09:01 PM | 132 Views
Join “HGLRC official group” to know more detail and participate in this giveaway event!6 winners will be selected this time!
Posted by sedhassan | Yesterday @ 08:01 PM | 136 Views
we are specialize in various types of chemical solutions that are use in cleaning defaced bank currencies,automatic laser cleaning machine,mercury powder-active powder-conserved powder.We also supply worldwide and with our well trained technical staffs that can travel to buyers location for effective work to be done. For more information kindly get back to us via Email ;[email protected] of whats app +33758122399 or +254752969888
Posted by mark_q | Yesterday @ 07:03 PM | 182 Views
After messing around with this idea on and off for nearly a year I have finally gotten it finished and flying beautifully. I went through quite a few iterations of the front motor mounts but now have them pretty much dialed in and working perfectly.

I have never really liked the idea of a "Quad" plane as they have too much hardware and weight to be efficient in forward flight so I decided to do a tri-copter set-up like the E-Flite Convergence with two front tilt motors and a fixed rear motor. Flight control is handled by a Matek F405-wing board running Arduplane/Chibios firmware and works brilliantly!

Here is a link to the build page - http://www.itsqv.com/QVM/index.php?t...n_VTOL_Project

Cheers!
Mark



Video-
Mini Talon Tilt Rotor VTOL (5 min 32 sec)

Posted by TMacFPV | Yesterday @ 05:35 PM | 158 Views
Custom Sounds, listen to "Amber"!🤩
Make your own custom voice audio files with text-to-speech editor and listen to music, voice, greetings, and warnings at the flip of a switch!😲
JUMPER T16 OPENTX CUSTOM SOUNDS (13 min 45 sec)

Posted by old4570 | Yesterday @ 03:55 PM | 201 Views
This was a lot more Bushleague than I would have thought ..

1) The wing section was laminated top and bottom .
2) The power pack from the Biplane Glider was put in about the same place as the capacitor power pack
3) The Su27 was then assembled as per usual
4) The CG looks to be more or less spot on , glides the same as the stock Su27

Just need some decent weather for a test flight ..
Posted by UnknownForces RC | Yesterday @ 09:23 AM | 254 Views
Front differential unit of the Ghost Rabbit GR1 with the steering system attached (0 min 16 sec)


Front differential unit of the Ghost Rabbit GR1 with the steering system attached.

The next parts arrived from a supplier, so we can make some progress with the assembly.
As with our 2WD car, the GX1, the steering system features a dedicated servo saver for every steering servo. However, for the GR1 linkage plates, centerlink and the bracket connecting the servo saver posts with the front gear box are CNC machined from billet aluminum to improve strength and match the cars design.
Posted by UnknownForces RC | Yesterday @ 09:23 AM | 252 Views
Trailing arm mount for the Ghost Rabbit GR1 (0 min 19 sec)


The mounting blocks for the chassis side end of the trailing arms for our Ghost Rabbit GR1 arrived. A small but nevertheless important part for the assembly of the car.

The mounting block is designed for low cost of ownership, keeping the expense for replacing components in case of a crash at a minimum.
The design also allows for a large angle of articulation for improved suspension movement.
Posted by UnknownForces RC | Yesterday @ 09:12 AM | 259 Views
Trailing arm mount for the Ghost Rabbit GR1 (0 min 19 sec)


The mounting blocks for the chassis side end of the trailing arms for our Ghost Rabbit GR1 arrived. A small but nevertheless important part for the assembly of the car.

The mounting block is designed for low cost of ownership, keeping the expense for replacing components in case of a crash at a minimum.
The design also allows for a large angle of articulation for improved suspension movement.
Posted by GroundControlRC | Yesterday @ 08:50 AM | 254 Views


DustOff #9 - XK DHC2 Beaver Bush Plane - I'm terrible at 3D Mode ;-(

Here is a link to the Video:
https://www.youtube.com/watch?v=gEOh9DswlC4

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #DHC2Beaver #BushPlane

I took the DHC2 Beaver out for another DustOff Flight after refreshing my memory on how to get it into 3D Mode.
Let's just say it would have been better if I had just forgotten all about 3D Mode ;-)

Complete Playlist for the XK DHC-2 Beaver Bush Plane
https://www.youtube.com/playlist?lis...vpJsn6uxbJzrA-

RC Tip #8 - XK DHC-2 A600 Beaver Landing Gear
https://www.youtube.com/watch?v=LtEwN1G0QgU

RC Tutorial - Add a Micro FPV System to the XK DHC-2 Beaver A600 Airplane
https://www.youtube.com/watch?v=Hd9PeOvpnYk

Maiden FPV Flight Of The XK DHC-2 Beaver Airplane
https://www.youtube.com/watch?v=RnQL_Jcb3V4

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

XK DH C-2 DH C2 A600 5CH 3D6G System Brushless RC Airplane Compatible Futaba RTF - Mode 2 (Left Hand Throttle)
https://www.banggood.com/XK-DH-C-2-D...47791920140372

XK DHC-2 A600 RC Airplane Spare Parts 7.4V 300mAh 25C Li-po Battery
https://www.banggood.com/XK-DHC-2-A6...47791920140372

XK DHC-2 A600 RC Airplane Spare Part Propeller Set XK.2.A600.009
https://www.banggood.com/XK-DHC-2-A6...47791920140372

Turbowing 5.8G 48CH 25mw FPV Transmitter 700TVL 1/4 CMOS Wide Angle FPV Camera Support OSD NTSC/PAL Switchable
https://www.banggood.com/48CH-25mw-T...47791920140372


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Consider Supporting Our Channel by becoming a Patron at: https://www.patreon.com/groundcontrolrc
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!

See Us On Youtube | Patreon | RCGroups

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
Posted by JamDan | Yesterday @ 08:36 AM | 290 Views
For those curious, here are some pics of the installed 12mm lowered twin-motor mounts by MarkQ. In theory, they should improve hand launching the twin-motor setup.

The mounts fit really nicely on the wing. A bit more aerodynamic than the earlier larger versions. I'm using the Brotherhobby 2806.5 1300kv Avenger motors with APC 8x6 or 8x8 props. ESC's were installed under the wing for added cooling.

*I'll do a maiden within the next few days and post about how it handles, particularly the hand launching.