DN POWER G3(6S4A) Li-Ion / Li-Polymer charger is a high-performance parallel charger. With a 24-digit A/D converter, it will monitor voltage and charging current of each cell at real time. Therefore it is more accurate.
Besides its high accuracy charging function, it also has pack discharge, data storage and computer communication functions.
Its powerful software can download charging history and curves, also can change some of charger’s settings. More advanced, it can do online-discharging, analyze battery’s capacity and generate discharging curve.


It have 3 main features:
1. Charging features
● Charge 1～6 cell Li-Ion / Li-Polymer battery in parallel independently，Charging current:0.5A～4A Adjusting step: 0.5A
so you can charge two 3-cell packs or three 2-cell packs or one 2-cell and one 4-cell pack
● Will display charging current or charged capacity on the LCD screen. Click “Function” button to switch.
● Buzzer starts to beep once cells are fully charged.
Charger will automatically switch off once cells are completely charged.
● Can save last 256 charging record, including charged capacity, status of each cell.
● Save the charging curve of each cell of last charging.
● Safety protection for reversed polarity.


2. Discharge features
● Discharge up to 10-cell Li-poly battery in series, max discharge power at 50W.
● Adjustable Cut-off voltage and discharging current.
● LCD display Shows discharging time and voltage and discharged capacity.
● Discharging curve can be viewed on computer


3. Computer Software
● High speed USB connection.
● Read charging record of last time and display charging curve.
● Change settings.
● Online discharging, analyze battery’s capacity and display discharging curve.

we, XUS HOBBY, will go to attend 2006 Chicago iHobbyExpo from 19th - 22nd Oct.

That's our first iHobby expo. Come and see us at booth #1902

we will bring a lot of hot stuffs, new products.
So come on check it out yourself, and of course, as always, there will be tons of great deals that you don't wanna miss!

official website:
22nd Annual International Hobby Show
Oct 19th-22nd 2006, Chicago, IL
www.ihobbyexpo.com

Cheers!

Jun
XUS HOBBY

check em out!

DN Power Micro-Controlled LiPo/Li-Lon Balance Charger w/ LCD Display



Product Features:
1. Input voltage: DC 11V~15V. The working electric current is less than 6A when it is charged in full load. The current of the fuse is 10A，which could prevent short circuit.
2. The charge current is 0.2A~2.0A and the adjusting step is 0.2A，which can be set by the buttons on the board.
3. Controlled by 4 separated internal micro computers. charge 1S-4S battery separately. no like other serial charging + balancer setup on the market. More efficient.
4. 4 separated JST style charging ports, one general charging port.
5. Big LCD display. real-time displays voltage and charging processing clearly and separately.
6. Low voltage protection. charger won't charge any cell if voltage is lower than 2.7v.
7. Automatically stop charging when it's done. A buzzer will call.
8. 4 separated parallel charging circuits ensure your battery 100% fully charged. Higher efficiency.
9. Charge mode of the balanced parallel connection
A. charge in parallel connection for one single cell or four single cells at one time
B. charge in parallel connection for a pile of two series-wound lithium cells or two piles of two series-wound lithium cells at one time
C. charge in parallel connection for a pile of three series-wound lithium cells or one single lithium cell at one time
D. charge in parallel connection for a pile of four series-wound lithium cells
10. Working rating: -20 ~ 60 C
11. Fully circuit protection: protect the charger and battery even when connect the battery or the power supply reversely.
12. General charging port will allow you charge any lipo battery which has balanering leads.