RCvertt's blog View Details
Posted by RCvertt | Jun 22, 2019 @ 03:19 PM | 3,798 Views
Apollo XI flying field is open again! Max flight ceiling of 250 feet.

Previous limit used to be 400 feet. Lucky we got 250 though. Curious how the new height limit will affect the larger aircraft and especially turbine use.

***If you see a helicopter hovering, even way in the distance, LAND immediately. Don't go around again, LAND immediately.***
Posted by RCvertt | Jun 17, 2019 @ 02:03 PM | 2,458 Views
Movement is being made with the FAA to get the Apollo-XI RC flying field back up and running. Thank you Jason for staying on top of this for us all.
Posted by RCvertt | Jun 04, 2019 @ 01:06 PM | 1,696 Views
Looks like they are going to make the Apollo XI flying field an AMA sanctioned field if it opens again. Please stop calling the airport, AMA and VallyFlyers while they work this out.

If the field is AMA sanctioned, the good part is...
1) We get to fly again.

Not sure if this is bad or not yet...
1) I fly VTOL airplanes. *Not yet sure if this will be allowed at an AMA sanctioned field? This is my main concern.
2) Flying there will no longer be free. You'll have to be an AMA memeber 75$ at least a year. *I'm an AMA member so no problem for me there.
3) Field will have someone there from sun up to sun down to police the field. *Not yet sure if this is a good or bad thing. I'm fine with that as long as I can fly my VTOL airplanes from the main runway. I see a possible issue with aircraft weight. Under a certain weight, 2lbs I think, you have to fly at the north corner of the field that is much smaller. It's to small for me to make a turn with the VTOL convergence in stability mode. This section of the field might also disappear if the field is AMA sanctioned?
Posted by RCvertt | Jun 01, 2019 @ 04:21 PM | 1,659 Views
The Apollo XI field has been around for about 60 years. New legislation signed by our president gives the FAA new power over RC flying they did not have before.

Affective May 24th 2019 the FAA suspended operations at the Apollo Field pending review of the local airspace and operating procedures.
Posted by RCvertt | Apr 24, 2019 @ 05:45 PM | 2,044 Views
Just saw this in the paper today.
Posted by RCvertt | Jan 11, 2019 @ 03:00 AM | 23,454 Views

Found this in the parking lot at the flying field this morning. I'm pretty sure it's someone's prosthetic eye.

If you know of anyone that visits the Apollo XI flying field pleas let me know or let them know what I found. I might be a spare that was in a vehicle and the person might not even know it's missing.

Location is the Apollo XI rc flying field just south of the Van Nuys airport. Images of the eye and the approximate area where I found it. It was in the first row of the parking lot, a couple car spaces south of the bleachers.

Accidentally kicked it some how while walking around my vehicle. Went over and picked up the white thing my shoe had touched and determined it to be a prosthetic eye on closer inspection. It blends in really well with the large gravel pavement of the parking lot if the colored side is facing up so I'm guessing it fell out of someone's car or was just too difficult for them to locate once it landed on the ground.

If it's yours, let me know so I can get it back to you. I also left two notes about it on the bulletin boards at the flying field with my info.
Posted by RCvertt | Dec 06, 2018 @ 04:07 PM | 30,345 Views
Just went there and found out it will be closing at the end of this year. They are still open but boxing up stuff.

Evett's widow has kept the store open for five years by herself. An amazing feat in this hobby business where store front hobby shops are more and more difficult to come by around here. A bit sad to see it go but it's had a very good run that she and Colby should be very proud of.

Colby taught me how to fly when I was little, for which I will always be grateful for. Let us never forget to help newcomers to the hobby as we were once helped ourselves.
Posted by RCvertt | Nov 10, 2018 @ 08:25 AM | 30,215 Views
Some setups for a 3 position switch that I use for my VTOL models. Posting here together so it's easier for me to find.

3 position switch and a 2 position switch. Three position flap switch and a two position gear switch.

1 channel 6 positions. One channel moves to six different positions from two switches.

Posted by RCvertt | May 08, 2018 @ 11:07 PM | 31,384 Views
They gave me a screen credit so I figured the least I can do is build a plane from the Marvel Universe as my way of saying thanks. The only question now, is which one.
Posted by RCvertt | Jan 01, 2018 @ 04:39 AM | 31,391 Views
Just discovered the series "Star Treak Continues" on youtube. All I can say as a fan of the original series and TNG is WOW!!!

As with TNG I didn't like it right away. It took be about an episode and a half to get used to the new cast as they have huge shoes to fill. After I got over it and just enjoyed it as it was meant to be enjoyed, man it just hits the spot for someone that is a Star Trek fan. Really well done to say the least. Has me thinking of some Star Trek related builds now.

Looks like they just recently released their last episode. Episode 11 is the one I discovered on Youtube the other day. Really sad to see this version end But they did a great send off Watching all episodes now. Just finished episode 4.

I've seen some Enterprise builds before. Might go for a shuttle craft or Bird-of-Prey.
Posted by RCvertt | Jun 01, 2017 @ 10:39 PM | 33,610 Views
I like the build quality so far. Can't wait to put it together. Little bigger than the one I built a few years ago.

Unboxing video if you want to see a box being opened...
V22 from Banana Hobby -unboxing (4 min 41 sec)

Posted by RCvertt | Nov 02, 2016 @ 12:30 AM | 35,577 Views
Flying plank test. Got lucky with the CG dead on for its first flight.

Crap video but it does show that it gets off the ground...
FlyigPlank (3 min 14 sec)

Posted by RCvertt | Oct 16, 2016 @ 03:58 PM | 34,886 Views
Working on getting these wings folded up. Waiting on a few parts to arrive to complete the job.
Posted by RCvertt | Sep 28, 2016 @ 10:52 PM | 41,609 Views
Posted by RCvertt | Aug 30, 2016 @ 12:16 AM | 35,605 Views
Tim at the flying field got some pics of our Star Wars fleet. His is the good looking one on the left.
Posted by RCvertt | May 31, 2016 @ 12:08 AM | 36,420 Views
Motor tilting and flight control movement using the MultiWii (2.4) 180 servo stretching code.

3 Edge Of Tomorrow Controls (0 min 39 sec)

Posted by RCvertt | Sep 14, 2015 @ 06:17 PM | 38,002 Views
Figured out how to get 180 servo movement in MultiWii 2.4 by adding the following lines of code. We'll see if we can have some fun with that


    }else if(state==2){                                                                 
      state++; // count up the state

Posted by RCvertt | Aug 28, 2015 @ 09:03 PM | 38,911 Views
I have some Arduino Nano V3 boards from HK that won't stay connected to my computer. Don't know if they are being bricked by windows or not. I have an FTDI basic breakout from Sparkfun for my ProMini so I thought there must be a way to use it with the Nano. Sure enough the below connection diagram works flawlessly every time. No need to hit the rest button on the Arduino. Plug your basic FTDI board from SparkFun into your computer, set the Arduino IDE to Nano board and hit the upload button in the Arduino program.
Posted by RCvertt | Jun 23, 2014 @ 04:41 PM | 42,409 Views
Es no bueno!
Squirrels only come in light brown around my neighborhood and this thing doesn't look brown to me. With those razor sharp teeth and large black oil filled eyes, it's clear that this is the infamous Chupacabra that I saw today. Looks like it's just waiting to pounce on people that walk under it so I didn't get too close.
Posted by RCvertt | Jun 22, 2014 @ 03:38 PM | 47,199 Views
Saw the film and really liked the QuadCopter that is in it so I thought it might make for a nice build. Flight controller will be a standard Wii sensor board with arduino Nano that I took out of an old build. Servos and motors are glued right into the foam.

Nice trailer with good reference in it..
Edge of Tomorrow - Official Trailer 1 [HD] (2 min 34 sec)
...Continue Reading