For sale are polycarbonate domes for DJI F330, F450 & F550 frames, AGL Hobbies UAP1 & UAP2 frames, and Mikrokopter frames.

You can order online at www.BadgerFly.com, or PM me if you are interested.

DJI F330 / 100mm Dome frame hemisphere dome dimensions: 100mm inside diameter, 50mm from flat flange to inside top of dome, 127mm diameter of flat flange (31 gms)
$18 (+ shipping)

DJI F450 / 135mm Dome frame hemisphere dome dimensions: 135mm inside diameter, 68mm from flat flange to inside top of dome, 158mm diameter of flat flange (68 gms)
$25 dome only or $29 dome + GPS pocket (+ shipping)

DJI F450 PLUS / 135mm PLUS frame hemisphere dome dimensions: 135mm inside diameter, 83mm from flat flange to inside top of dome, 158mm diameter of flat flange (68 gms)
$29 dome only or $33 dome + GPS pocket (+ shipping)

DJI F550 / 150mm Dome frame hemisphere dome dimensions: 152mm inside diameter, 76mm from flat flange to inside top of dome, 185mm diameter of flat flange (85 gms)
$25 dome only or $29 dome + GPS pocket (+ shipping)

DJI F550 PLUS / 150mm PLUS frame hemisphere dome dimensions: 152mm inside diameter, 92mm from flat flange to inside top of dome, 185mm diameter of flat flange (85 gms)
$29 dome only or $33 dome + GPS pocket (+ shipping)

UAP1 frame hemisphere dome dimensions: 134mm inside diameter, 67mm from flat flange to inside top of dome, 161mm diameter of flat flange, 5mm vertical flange lip (73 gms)
$18 dome only or $22 dome + GPS pocket (+ shipping)

UAP2 / 175mm...Continue Reading

This is what I am flying with at the moment:

XHex - SuperX:

XAircraft SuperX flight control board
AGL Hobbies XHex UAP2 frame with 21.5mm OD carbon fiber arms (15" long)
BadgerFly custom polycarbonate protection dome
AGL Hobbies tube legs landing gear set
T-Motor MT4006-13 KV 740 motors
AfroESC 30A ESCs with SimonK firmware
DYI Quad Copters Power Disk power distribution
NGH-7030-N FPV camera 5-15V DC
ImmersionRC 5.8GHz 600mV FPV transmitter with SpiroNet cloverleaf antenna
XAircraft SuperX OSD
Turnigy 13x4.5 wooden props
Futaba R6303SB S-Bus receiver
Dual 4S 5000mAh 25C Zippy batteries
AGL Hobbies floating camera mount with 4 soft threaded dampers

ImmersionRC DUO5800v3 5.8GHz diversity receiver
HeadPlay FPV goggles with ski mask mod
Futaba T10CHG radio transmitter

Weight without batteries: 6.2 lbs (2.8 kg)
Weight with batteries: 8.4 lbs (3.8 kg)
Flight time: approx 13 minutes

X8 - SuperX Pro:

XAircraft SuperX Pro flight control board
AGL Hobbies XHex UAP2 frame with 21.5mm OD carbon fiber arms (15" long)
BadgerFly custom polycarbonate protection dome
AGL Hobbies tube legs landing gear set
Avroto M2814-11S motors
AfroESC 30A ESCs with SimonK firmware
Homemade power distribution disk
xxx FPV camera 5-15V DC
ImmersionRC 5.8GHz 600mV FPV transmitter with SpiroNet cloverleaf antenna
XAircraft SuperX OSD
xxx props
Futaba R6303SB S-Bus receiver
Dual 4S 5000mAh 25C Zippy batteries
AGL Hobbies floating camera mount with 4 soft threaded dampers

ImmersionRC DUO5800v3 5.8GHz diversity receiver
HeadPlay FPV goggles with ski mask mod
Futaba T10CHG radio transmitter

Weight without batteries: xx lbs (yy kg)
Weight with batteries: xx lbs (yy kg)
Flight time: approx zz minutes

For sale are black and white domes for DJI F330, F450 & F550 frames, as well as Rusty's UAP1 & UAP2 frames.

You can order online at www.BadgerFly.com, or PM me if you are interested.

DJI F330 frame hemisphere dome dimensions: 100mm inside diameter, 50mm from flat flange to inside top of dome, 127mm diameter of flat flange (38 gms)
$22 (+ shipping)

DJI F450 frame hemisphere dome dimensions: 135mm inside diameter, 68mm from flat flange to inside top of dome, 158mm diameter of flat flange (59 gms)
$25 dome only or $29 dome + GPS pocket (+ shipping)

DJI F550 frame hemisphere dome dimensions: 152mm inside diameter, 76mm from flat flange to inside top of dome, 185mm diameter of flat flange (75 gms)
$25 dome only or $29 dome + GPS pocket (+ shipping)

UAP1 frame hemisphere dome dimensions: 134mm inside diameter, 67mm from flat flange to inside top of dome, 161mm diameter of flat flange, 5mm vertical flange lip (64 gms)
$25 dome only or $29 dome + GPS pocket (+ shipping)

UAP2 frame hemisphere dome dimensions: 174mm inside diameter, 87mm from flat flange to inside top of dome, 208mm diameter of flat flange, 5mm vertical flange lip (100 gms)
$25 dome only or $29 dome + GPS pocket (+ shipping)

0.093" thick Hi-Impact Styrene domes are very strong and are paintable.

Hemispherical domes can be purchased alone or with an optional GPS sensor unit pockets (except F330). The pocket fits perfectly at the top of the underside of the dome to protect the...Continue Reading

Helping hands solder tools with adjustable arms and clips to make those circular polarized cloverleaf antennas easier with more precision!

The helping hands solder tool base is made from 1/2" thick aluminum, so it won't tip over, and won't burn from the solder. In addition, there is a non-slip layer of cork on the bottom to protect your work surface. The arms with the holding clips move easily, are infinitely adjustable, and will stay put exactly where you want to position them. The alligator clips hold the connectors and wires firmly and will also rotate 360 degrees. Perfect for soldering antennas, connectors, circuit boards, ESCs, and just about any other device!

All brand new and ready to use! I've sold over 150 of these on this forum and others. Check my trader ratings for comments from purchasers. The tools are fully assembled, and I will ship worldwide.

Standard 4-Arm Helping Hands Solder Tool - Aluminum base is 6"x4"x1/2", and the all black arms with alligator clips measure 9.5" and 5.5" long. Note that the magnifying glass and Maglight are not included.
$54 + shipping

Magnifying Glass 4-Arm Helping Hands Solder Tool - Aluminum base is 8"x4"x1/2", and the all black arms with alligator clips measure 9.5" and 5.5" long. The 3.5" diameter magnifying glass has a 5x power and is centered between the clip arms and measures 13" long.
$74 + shipping

2-Arm 2-Post Helping Hands Solder Tool with Aluminum...Continue Reading