stock motor

YEP 100 A esc : drop fit ...no cutting, no shaving, no modification LinK:https://hobbyking.com/en_us/hobbykin...___store=en_us

castle 10 A BEC

Aeronaut 7x7 prop

battery: nanotech 2.2 70-150C 4s


watts : 1046 at 74 A




upgraded set up :

Cobra CP-2814-2000 Brushless Motor, Kv=2000: link:http://innov8tivedesigns.com/cobra-c...-motor-kv-2000

YEP 100 A esc : drop fit ...no cutting, no shaving, no modification LinK:https://hobbyking.com/en_us/hobbykin...___store=en_us

castle 10 A BEC

Aeronaut 7x7 prop

battery: nanotech 2.2 70-150C 4s

watts : 1621 at 110-115 A

F-27 Evolution /Stryker from Eflite at SACRATS (2 min 24 sec)

Project T-28

Carbon z t-28
Aspire sound system
MrRc. Machine guns and lights
Castle. Esc. 2x BEC”s
Custom cockpit
Callie graphics
Dubro. Control rods / Clevis
MAS prop
Home Depot paint 😜


VIDEO LINK:

T-28 Trojan RC Plane (Carbon Z) (4 min 8 sec)

MikeRC

power system: jet fan 90 +het 2100 kv
battery 6s : DINOGY 2.0 6S 5000 MAH
exhaust dia reduced to 76 mm
intake cleaned and plywood splitter added.

Stinger 90 EDF on JETFAN90 (3 min 26 sec)

Avanti S on 1820 Kv HET motor , Intake splitter added ...Unlimited vertical , better sound and efficiency .( High wind conditions today. )

Freewing Avanti S 80mm Sport jet with 1820 KV inrunner+ FW fan (2 min 31 sec)

Mini Pylon racer... excellent power to weight ratio: 6s 650mah ..nope not a typo watch 2.10 sec, full volume.

Mini Shark Pylon racer at SACRATS (3 min 34 sec)

Been flying stock with 900 mah and aeronaut carbon prop 8x6 and aeronaut spinner.,. fiberglassed the tail and put lemoN rx gyro...super fun... I would say 65-75 mph .. not bad for $100 RTF , though this can take more speed .



I built another with microdan 2900kv on 3 cell and 4 cell on 5 x5 and 5.25x4.75 + 45 amp esc 600+ watts makes it a pylon racer close to molded ones... glassed the tail with CA + FG


flies awesome. This can take speed, no flex. easy landing

link to video :

Hobby King Kinetic 815 :Modified with Microdan 2900kv at SACRATS (4 min 47 sec)

Mike

• Stock, with upgraded struts
  
• Callie custom graphics
  
• Revo 6s 3300 mah pack 70c
  
• panels and custom weathering..

Stock Mig -21 with Jet fan 90 on 6s 5000 pack

added lots of Aluminum panels , rivets, Russian decals from Caliie graphics....

the afterburner lights burned out (controller ) before maiden at bench...sucks...so its dead weight inside.,.,. Doesn't affect any performance......Continue Reading

Got this foamy used from a local JET flier, then I proceeded to re-paint the whole plane..add scale weathering, bomb racks, tail hook , and finally added Mr RC sound system in a 1100mm plane..thats right.... flies on 4 cell now... Dinogy Orange pack.,...awesome flier and gets everyones attention...parts are super scarce for this plane..so its mostly on shelf now..

A1 SKYRAIDER from Durafly with Mr RC sound system! (1 min 14 sec)

A1 SKYRAIDER from Durafly with Mr RC sound system! (2 min 55 sec)

...Continue Reading

some of my speed planes ......Continue Reading

Had a chance to take detailed pictures of a Mig 15 when I visited the Oakland Plane Museum with Nikki.

I am building a 90mm Fiberglass Mig 15 from HK and completing redoing it and making it semi scale......Continue Reading

Big lover of sabre and Mig 15's love the history and feud behind them . Even had the privilege to meet a Sabre pilot ;

I think, any modeler, jet modeler especially should have one brand of F-16 in their hangar....

they are always good fliers , and I feel like they are scale jet trainer like a high wing....

I have had all sizes ..50mm j power ... HP f-16 several power levels, 80mm fans, 90mm and a few in box to be built ...Continue Reading

Hard to store these one piece planes, I don't like to put together big jets and planes at the field and redo the connections.,.,. I always like one piece and just slide in battery with minimal set up. Now this limits me by a lot .. may be a bigger house and truck

Bought this plane in a crashed/damaged state from RCG member couple years ago.. finally fixed it up.. and had it maindended it last weekend and couple speed run flights today... based on Doppler from the earlier Reverb, on mega 16fd , we are guessing this around 165-170 mph... ... the launch is the tricky part once figured out..then its blistering speed time with awesome eerie sound of a composite wing.
makes my jets lot slower..seeing this fly 165+ mph....
lands around 45- 55 mph. without spoilerons.

A big thanks to all the RCG members who helped me set-up this plane!!

motor: mega 16/15/3
apc 4.1 x 4.1
castle 54 amp esc
3 cell 1900 mah
carbon reciver
...Continue Reading

Prop planes..new to me apart from pylon racers ..

Got this used from a Turbine Jet Guy in SF ...went over it..weathered it..added power mods and other stuff... enjoy.

4 cell 2200 mah Dinogy pack, Castle Ice 50 esc, DE park BEC, ,Mr RC sound card and TT-25 .
Weathered up, oil stains, tail hook etc..more pics on RC group blog

A1 SKYRAIDER from Durafly with Mr RC sound system! (2 min 55 sec)

A1 SKYRAIDER from Durafly with Mr RC sound system! (1 min 14 sec)

...Continue Reading

Venom F-86

4 CELL hv 4400 mah pack

Het motor, 12 blade fan = 1400 watts 150 amp esc

Full House plane with air brakes , flaps, retracts...scale cockpit

Some old planes.......Continue Reading

Hello Guys,

Last year I did buy off here a damaged fusion 400 and I kinda rebuilt it totally and today I had a chance to fly..OMG with 400 watts this thing hauls..I am using a HK 5x5 Prop which I will change to APC for next flight...loving it.

enjoy rebuilt pics

Iam not sure...If u guys have seen this or heard this...but please ..do turn ur volume up before watching this clip

Lexus LFA: a symphony of sound (SkiddPlayer TV) (1 min 25 sec)