scruffy1's blog View Details
Archive for September, 2019
Posted by scruffy1 | Sep 16, 2019 @ 07:21 AM | 1,064 Views
subtitled "how to flash additional protocols to the irx4 (first version) using a simple usb link to the taranis x9d+"

okay, it's not actually magic, it's flashing new and clever firmware to allow additional protocols to be added to the multimodule using the same plain usb cable that you use to connect to openTx companion, rendering the usb cp2012 breakout and wiring to an opened multimodule redundant

trust me, you'll believe it is magic once you've done the upgrade


my considerable gratitude to pascal (hpnuts) and ben (benzo99) for their assistance in guiding me through a significant simplification in the process to upgrade the irx4 module (that's it in the picture in the post below this)



realistically, all you need is here :
https://github.com/pascallanger/DIY-...iling_STM32.md

anything else is linked conveniently from that link

the latest upgrade binaries are at https://github.com/pascallanger/DIY-...odule/releases


since i did it from scratch well over a year (or maybe two) ago, there has been a release of the "flash multi" app that makes it way simpler

the only bits you will need are :
and the phillips head screwdriver to undo the irx4

oh, and if you don't have one, the iRangeX irx4 module - go on, use my...Continue Reading