Old_Pilot's blog View Details
Posted by Old_Pilot | Today @ 09:56 AM | 1,193 Views
Down to push rods and control horns....and I'm going to add the red and blue stripes to the stab to match the wing.....but I like it !!!!!
Posted by Old_Pilot | Yesterday @ 07:21 PM | 3,494 Views
Das Ugly Glider - Part 8

Alternate color scheme......Still have to cover the stab..Fuse and fin are white, black landing skids. Pic tomorrow...'supposed to rain all weekend.....

Of note, I'd forgotten what a PITA scalloped control surfaces were to cover...LOL
Posted by Old_Pilot | Yesterday @ 01:35 PM | 4,118 Views
Well today's clustermess is courtesy of the US Postal Service (Wait, did I say "service" ??) Seems my covering material left Gurnee IL 8 days ago, traveled to Charlotte NC, and is now on it's way to Dallas TX.....Did I mention I'm in Memphis TN ?

I don't have any words for this situation (well, I do, but they would get me banned from RCG) So I changed the color scheme for the glider..white with red and blue shoulder stripes, black trim....Pictures soon
Posted by Old_Pilot | Dec 01, 2021 @ 09:38 AM | 10,567 Views
Das Ugly Glider - Part 6

Got the motor and folding prop fitted and balanced, installed the battery and ESC, checked the weight so far (31 oz), and then put her on the CG balance.....right smack dab where she's supposed to (20% of MAC). I figure that the covering will add another 2 ounces (9.5 sq ft) so the estimated AUW will be 33 oz. Projected wing loading will be 33 oz/ 3.41 sq ft = 9.67 oz/sq ft.....Couldn't be more pleased
Posted by Old_Pilot | Nov 30, 2021 @ 05:04 PM | 11,809 Views
Just waiting on covering material now
Posted by Old_Pilot | Nov 29, 2021 @ 08:21 AM | 18,669 Views
Das Ugly Glider - Part 4

Got the center section of the wing done and hinged the feathers...Will start on the outboard sections of the wing today
Posted by Old_Pilot | Nov 27, 2021 @ 06:13 PM | 27,319 Views
Das Ugly Glider - Part 3

Very productive day...and very pleased with the weight...got the fuse assembled and dry fit the tail section...I'll be darned if it doesn't look like a little Ugly Stik...The Tab-A-into-Slot-B method made the assembly so easy...I guess I'll start on the wing tomorrow
Posted by Old_Pilot | Nov 26, 2021 @ 04:25 PM | 19,120 Views
There's an airplane in there somewhere..I swear it is..now I just have to figure out where all these parts go.....LOL
Posted by Old_Pilot | Nov 26, 2021 @ 01:38 PM | 18,803 Views
I cut all the parts this morning, and starting to assemble. Wing ribs are 1/8", Fuse sides are 1/8", Fuse top,bottom, stab and fin are 3/16, as are the ailerons, wing tips and TE
Posted by Old_Pilot | Nov 25, 2021 @ 11:47 AM | 16,101 Views
To all my friends and colleagues here on RC Groups......Have a safe, happy, and healthy Thanksgiving
Posted by Old_Pilot | Nov 24, 2021 @ 12:34 PM | 13,033 Views
So here's what I'm gonna cut and build..I'm pretty sure Phil Kraft didn't have this in mind...still have a little banjo work to do, but I like the proportions
Posted by Old_Pilot | Nov 21, 2021 @ 07:49 AM | 13,209 Views
I'm determined to build a conventional glider, but this time, I'm not going to try to use an 8 year old wing....and yes, she'll be based on an Ugly Stik.

First guess is a ~60" wing span with either a PW-51 or an Aquila Airfoil.Stay tuned
Posted by Old_Pilot | Nov 19, 2021 @ 04:47 PM | 13,416 Views
Cut her out yesterday.....Flight ready today
Posted by Old_Pilot | Nov 18, 2021 @ 02:25 PM | 8,948 Views
Chicken Soup for the Soul.....after yesterday's disappointment, I decided I needed a "feel good"...cut her out this morning...starting the paint job now....
Posted by Old_Pilot | Nov 18, 2021 @ 08:19 AM | 7,843 Views
Well, yesterday ended in disaster for the Scrap Glider....I was moving the airplane from one portion of the shop to another, stumbled (not paying attention) and crushed the airframe...broke the fuse in half and the wing in 3 places....I guess she was never meant to fly ...Guess I'll start on something else...POOP !

There's a small step between the new and old portions of the shop, and I missed....just clumsy..I feel lucky I didn't break anything more than the airplane, or require stitches somewhere.....could have been a lot worse
Posted by Old_Pilot | Nov 17, 2021 @ 08:38 AM | 7,297 Views
And the Darwin Award for the day goes to..drum roll,...ME...not sure what I was thinking when I bought these little motors (2830-1200), but instead of TLAR, these are TDLR....."That Don't Look Right !"..So I mounted the larger motor (3530-1100) and a larger battery..Good news is that the airplane balances just forward of the spar........the bad news is my folding prop won't work....However, there may be a TU-95 Bear foamie as a result.....In the words of my second favorite philosopher, Walter..."Dumb Ass !"
Posted by Old_Pilot | Nov 16, 2021 @ 08:38 AM | 6,877 Views
Das Ugly Glider
Finished the fuse and feathers, and I got to looking at it, and guess what ? The fuse is a slender Ugly Stik fuselage....Go figure.

Waiting on the motors to get here.....will start covering today
Posted by Old_Pilot | Nov 11, 2021 @ 05:50 PM | 8,175 Views
So here's what I plant to cut and build for the old wing
Posted by Old_Pilot | Nov 10, 2021 @ 03:28 PM | 9,329 Views
Trying to design a fuse and feathers for this old wing...Does this look proportional ??
Posted by Old_Pilot | Nov 09, 2021 @ 10:54 AM | 5,434 Views
So I made this wing back in 2014, and it never flew.....61" span - 5.5 degrees of dihedral each side......the plan is to cut a fuse and feathers for a powered glider. Airfoil is a 9% Clark-Y, 8.5" chord