old4570's blog View Details
Posted by old4570 | Nov 29, 2021 @ 06:15 PM | 12,758 Views
FMS800 Vtail (5 min 45 sec)


I haven't flown this in a long time ..
The conditions were really sweet , the 800 just needed a little trim ..
Anyone that likes a really gentle flying model ..

This one has a Hobby King folding prop and almost the entire flight was @ 50% throttle .
Posted by old4570 | Nov 23, 2021 @ 06:29 PM | 10,277 Views
Micro Tundra crashed and broken (5 min 50 sec)


Wow , what's with the crashing ?
Almost like , flying skills deteriorated after 2 years of lock downs .

Yeah , MT .. I pushed my luck and broke it ..
But , it is reparable ..
Though I cant trust the way the wing mounts ( weak ) without the wing struts ( I broke the plastic ends that screw into the wing / model ) ..
So I will have to resort to old tech ... BBQ skewers and rubber bands for extra hold down power .
Micro Tundra will fly again ..


Posted by old4570 | Nov 05, 2021 @ 10:29 PM | 19,867 Views
Crashed the XK A430 (6 min 40 sec)



Oh dear !
Was doing some inverted flying ..
And forgot all about rule No1 .. Don't chase the plane ...

Yes , I began to chase the plane .. & I should have pulled the plug on the inverted flight right away when it happened .
But I thought I could get ahead of it ..

I was wrong ! I had time to pull the plug but got stubborn about it ..
And the XK A430 flew into me ...

No , no pain or suffering , except for the embarrassment !
The XK A430 is so small and light I barely felt the impact .. + I cut the motor just before impact ..
No damage to the A430 .. So just kept flying .
I have to remember , the A430 is a fast angry little monster and things happen quickly .
Which is why you need to be ahead of the plane ..

Oh well , stuff happens and it's good to have a football field to yourself so you can hot dog a little .
Posted by old4570 | Nov 03, 2021 @ 07:38 PM | 15,118 Views
Two Battery Morning ( Turbo Timber ) (8 min 41 sec)



After a short sharp 2 month lock down ...

Im a little Rusty ....

First battery to familiarize myself with the TT ...... again !

And the 2nd battery to try some inverted stuff ... Try and pick up where I left off .

This was Melbourne Cup morning ...

Anyways , the TX16 sure gives a slow roll ... Might have to go back to the Taranis .
Also , might need a new motor ...
Really feeling the lack of power with the TT , just needs more , just Turbo it a little .
The two blade is better than the 3 blade , just needs ....................... more
It's almost there , just not quite reaching it's full potential .
And I am not brave enough to 3s it ..
So I might want to start looking at a new motor ..
Posted by old4570 | Oct 28, 2021 @ 08:21 AM | 21,307 Views
Perfect RC morning XK A430 (6 min 3 sec)


It was supposed to be windy !

My back kicked me out off bed around 6.30am ... So after hitting the porcelain , I went to get a drink ..
Glancing out the window , Blue Sky and a perfect chalm ...

So I grabbed the XK A430 and went out for my morning walk / fly / walk back home .
As soon as I closed the front door on my return , the predicted wind came up .. And the wind blew for the rest of the day .

Still rusty azzzz can be !

But I did try a fair amount of inverted action ... It's tough when for two months ( quick sharp lock down ) your under 22 hour house arrest and no outdoor activities are permitted ...
I mean , just how much of a threat is a guy standing in the middle of a football field flying a Micro Electric Plane by himself ? ( Verboten )
Such is life in a Convict Colony ...
And all the rubbish Stalin wanted , Dangerous Dan is making a reality ! All Hail Ming the Merciless !
Posted by old4570 | Oct 10, 2021 @ 10:25 PM | 31,839 Views
XK A430 nearly hits the ground (5 min 16 sec)


I over rotated in a turn and almost crash the A430 ..
Really need to be careful with this plane as the roll rate is crazy .

Still , a amazing morning that quickly turned into a windy rainy day once I was done !

If only I had known earlier it would be such a nice morning ..

The rust is showing from all that Gooberment protection . ( Super Nany State )
Posted by old4570 | Oct 06, 2021 @ 08:32 PM | 11,325 Views
Sports Cub S2 (6 min 4 sec)


Yeah , two months since last I took the sticks .
When will the insanity end ? I guess when and if the insane are voted out of office ! ( I guess )
But when you give people power ! Are they prepared to give it up .

Warning to the world , Oz is top heavy with power ( the people are powerless ) .
Is this the path you want to take ?
For the last two years I have seen stupidity at it's best from our alleged leaders ( I didny vote for them ) .
So , if you vote stupid ! = You get stupid !
Or as the saying goes .... You get the government you deserve ! ( you voted for them )
Austrlian's have been punished for their electoral choices , will they learn ? History tells us No !
Posted by old4570 | Oct 03, 2021 @ 12:59 AM | 13,990 Views
Apparently the parent company filled bankruptcy ..
Butt --- Website is up and running I notice - 3rd October .
Does this mean GB is back ?
Posted by old4570 | Sep 22, 2021 @ 01:41 AM | 22,162 Views
So I had to try and rid myself of unwanted weight ..
So I tried a print without a top and bottom surface .. For a open frame .

weight = 19.36 grams ... That's just for the PLA
Posted by old4570 | Sep 21, 2021 @ 12:03 AM | 16,609 Views
We are still in perpetual LOCK DOWN ( Thank you Dangerous Dan )

How much longer ? Christmas maybe ( Xmas to some ) ...

So off to Thingiverse I go ...

There be this wing that I been thinking off .. Printing .

So far today , I printed out the centre section @ 20% infill , and it's a brick ..
So I am doing R2 with some design changes to better
A) Accept a 949 flight control board
B) Accept a 8520 brushed motor .

I will back off on the amount of material used , maybe 10% infill .. As the print came out very strong ( overly strong perhaps )
So I will start a new print ASAP

Check out the other posts in this thread .. ( Contain updates )
Posted by old4570 | Sep 09, 2021 @ 11:17 PM | 14,886 Views
Anyone tried to check out Gearbest ...

Every addy seems to be returning an invalid response ..

Is Gearbest gone ?

Read some stuff , that GB was recently going quiet !

Not that they were that great at responding , but ? Their website is

Been a while since I ordered something , but was there any warning ... ?

Did I look at something last week ?


The requested URL "[no URL]", is invalid.
Reference #9.9dc2ce17.1631247569.3d9f4d5c

Parent company - Bankruptcy ...
Posted by old4570 | Aug 28, 2021 @ 10:17 PM | 21,261 Views
Compilation of Engine news and tests for the year 1971 ..
Posted by old4570 | Aug 25, 2021 @ 12:18 AM | 14,348 Views




Bee Hives !

Cant do " Notin " cos of the 22 hour lock down or are we locked up ?
Anyhow , been a while since I reached for the Macro gear .
An attempt at macro photography , try and sweep away those covid blues .
Posted by old4570 | Aug 07, 2021 @ 11:00 PM | 30,436 Views
QSP Parrot D2 (12 min 28 sec)


Have you heard people say - My Kingdom for a decent pocket knife ?

What I have today , is a decent pocket knife for the money .
It doesn't look TactiCool or anything , it is in fact some what a classic pocket knife when it comes to size and looks .
It opens via Thumb Stud , slowly or quickly . Just depends .

Problems - There was only one !
My liner lock was SOFT ! and the knife would easily gravity open . ( I hate this )
SO I had to dis assemble the knife , give the liner lock a bit of a bend inward and re assemble .
Lock is nice and taught now . No issues - barring in mind it did need correction .

Blade steel .. Good old D2 ! I really like D2 when it's done correctly ..
Factory edge returned some 250 slices
and my 22deg 180 grit diamond cut edge returned 450 slices of rope . ( Thats decent D2 performance )

With a flat grind on the blade , it makes the spine of the blade almost perfect for running on a ferite rod ( make some sparks ) as the angle at the spine is greater than 90 degrees . It does throw a nice spark ( In the video ) .
Here in the land of Oz , the price on the parrot at the moment is just under $55 republic bananas . This makes the Parrot really good value when compared to some overpriced , underperforming knives on the market .
Remember , this is the D2 version . I own a earlier 440c Parrot that completely disapointed .
I much prefere decent D2 to some underperforming exotic . ( But thats just me )
I like the D2 Parrot , an if they all are made to the same standard ( hopefully tighter locks ) , then a big thumbs up from me .
Posted by old4570 | Jul 27, 2021 @ 11:43 PM | 20,399 Views
Compiled and uploaded ..
61 pages of Covid Boredom busting reading !

@ hip pocket
Posted by old4570 | Jul 20, 2021 @ 07:23 PM | 16,943 Views
Made a few changes so I could share @ RCG

Engine News 1968 + Some engine tuning from 68

Hmmm , Covid bored publication !

No , I'm not taking credit for anything except for a bit of screen grab / editing / re sizing / and printing to pdf .
Posted by old4570 | Jul 20, 2021 @ 12:19 AM | 16,210 Views
1969 Engine News Compilation - For the year 69
+ TOPSKY .375 DIY Engine series .

Covid Bored with 22 hour home detention ( Lock Down )
Danger Dan says seven more days ? ( Danger Dan likes the sound of his own voice ) .... Just an opinion !

EN69 PDF , should be available soon ( uploaded ) ..
Posted by old4570 | Jul 18, 2021 @ 10:32 PM | 14,558 Views
A few years ago I made it my mission to save as many Aeromodeller documents / books as possible .
Over at Hip Pocket ( https://www.hippocketaeronautics.com/ )
There is a sizable collection of Vintage magazines posted .
I have posted under two user names ( old4570 and MattEK )
Anyways ,,,

Time to get help - To fill the gaps in Aeromodeller magazines .

Needed are issues from :

1939 - 02, 03 , 04, 05 ( Months )
1940 - 01 thru 08 and 11 , 12 ( only have 9 and 10 )
1943 - 02
1944 - 07
1946 - 12
1948 - 11
1949 - 08 and 12

As you can imagine , from 50 to early 70's is rather complete ..

So if you have these missing issues and can turn them into PDF's That would be great .
Or maybe photograph the pages ?
It would be great to make these issues available to an ever decreasing modelling community ( Save our history )
Our Hobby = Our History !
Posted by old4570 | Jul 15, 2021 @ 02:18 AM | 15,059 Views
Ganzo Adimanti at the rope (13 min 47 sec)


Oh dear !
I have wanted this one for some time .
All the reviews I have seen have been so positive or anti negative !

A) The knife is very well bolted together .
B) The knife looks really good
C) The knife feels - Ok , I have issue here .
The grip is cut short and a trendy looking bend is put right were my pinkie finger wraps around the grip.
That corner digs into my finger ( watch the video ) . Also the clip hits the bone in my hand ..
Making the back end of the knife a pain .

D) Blade ... That false edge looks sweet ! But makes sharpening on my guided knife sharpener a PITA !

Lets get right to edge holding .

Factory Edge returned 200 slices of rope
Guided knife sharpener returned 200 slices of rope - This is not good for D2 Tool Steel .
So I put the knife to the whetstone grinder -
Oh yeah , the grinder really shows up a badly ground edge . And the Adimanti had a badly ground edge .
I did not grind away 100% of the old edge ! That may have been a mistake , but I dont like grinding away my blade steel . I did clean it up 98% at the very least . There were signs under magnification that a little of the old edge remained here and there ( Just a little ) . And that may have cost me a little performance .
Whetstone grinder edge - 400 slices of rope . Thats double folks .

Also the Faux edge is sharp enough to use one of those fire starter rods - ( in the video ) .
Over all...Continue Reading
Posted by old4570 | Jul 10, 2021 @ 09:21 PM | 5,283 Views
I liked XP .. Just a shame no one ports it for modern hardware .
But from time to time I run it VIA VirtualBox .
Only problem , ( only ? )

Well , a big problem is surfing the net .
using old browsers that support XP , they tend to lock up and crash when hitting certain web sites .
Here I am with XP , a browser is out there that is actually ported for XP .
It be called MyPal ..
Opera 36.0 can still be downloaded - but locks up a lot . ( Maybe some configuring ? )
But , so far MyPal seems to be running ok .
Now to find other software that will run on XP ...
It's like so yesterday , but from time to time it's nice to re visit older software like Win95 or 98SE ..
Though I dont know that you could surf the net with those ..
There was supposed to be a hacked / ported 95 some where out there ? But I never found it !