Posted by Gary Chen | Today @ 03:25 AM | 26 Views
YANGDA 2-Axis 30X EO/IR Gimbal For Fixed-wing VTOL (7 min 31 sec)

Eagle Eye-30IE-U EO/IR thermal and 30X optical zoom visual imaging camera with 2-axis gyro-stabilized gimbal is specially designed to be used on fix wing plane and VTOL. The SONY 30X zoom camera provides 1080P 60FPS full HD video streaming and up to 360X zoom capability, which enable you to see every detail you need in the air even you are far away from the object. While the thermal camera allows you to detect targets in the night or low visibile conditions, and provides you with priceless information when you are carrying out missions like inspecting or monitoring objects. High-performance 2-axis gimbal is developed based on FOC(field-oriented control) technology, which will give you crystal clear video footage.

Compact and lightweight
The compact 1.2kg compact system is ideal for integration into UAV, fix wing and VTOL.

High-quality video sensor
Eagle Eye-30IE-U is using SONY FCB-EV7520 camera block, features anti-fog, video enhancement, and some other advanced features.

Auto object tracking
With onboard object tracking module, Eagle Eye-30IE-U is able to track static or moving target easily, keeping it in the center of the frame.

Continuous 360-degree rotation
The gimbal has continuous 360-degree rotation under standard HD-SDI output, which will enable the gimbal to track targets freely without any angle limit.

Geotagging function
Another feature for Eagle Eye-30IE-U is that the...Continue Reading
Posted by old4570 | Today @ 12:26 AM | 122 Views


Unboxing & First Perspective


Unboxing :

Admittedly I was impressed when I opened the box , the Ezio seemed to be light , and looked really nice ( in the bag )
But once I started pulling the parts out of the bags , I started to feel that perhaps this was not the best Ezio to leave the HK warehouse .
The first thing that caught my eye was the sloppy covering @ the middle of the wing ( More Soon ) .
Also the hatch , the magnet apparently was not glued to the hatch cover at all .. Not that I can see .

Fitting it together :

Oh the problems , we are talking about a serious PITA ( Pain in the abacus )
1) Wing was broken - hence the sloppy looking covering
2) Hatch cover magnet not glued
3) Wing does not fit the fuse
4) Tail screw does not fit ( Elevator )
5) Ailerons - The screws that lock the control wires ? They dont go in all the way .. It's not the fault of the screws , simply the holes for the screws were either not drilled deep enough or not threaded deep enough . ( @ the control horns )

So what I paid $ for , was a problem looking for solutions .
1) I had to peel the covering , glue and glass the middle of the wing
2) Fit the wing to the fuse VIA some file work
3) Replace the tail screw ( Horizontal stabiliser / elevator )

Still to do
1) Hatch cover magnet - Not a priority
2) Aileron control rod locking screws - To be replaced and ground at the tips so they sit deeper ( PITA to do )

While I remember
...Continue Reading
Posted by Merch | Yesterday @ 11:45 PM | 146 Views
https://www.banggood.com/Eachine-E013-Plus-Micro-FPV-Racing-Drone-Anti-Turtle-Mode-w-5_8G-48CH-1000TVL-Camera-VR006-Goggles-p-1442886.html



Pictures will be posted up later today with a full review to follow,strange that they are selling the RACING HOOPS with timer seperate now.











Eachine E013 Plus Micro FPV Racing Drone Anti-Turtle Mode w/ 5.8G 48CH 1000TVL Camera VR006 Goggles

Specifications:

Aircraft Brand Name Eachine
Item NO. E013 Plus
Size 104x115x43mm
Weight 48g
Color Red, White (Optional)
Material PP
Gyro 6-Axis
Remote Control 2.4G
Image Transmission 5.8G
Motor 8520 Brushed
Battery for Quadcopter 3.7V 500mAh 25C LiPo (Included)
Battery for Remote Control 3 * AAA battery (Not Included)
Charger USB/700mah
Flight Time 5mins
Control Distance 120m
Camera Lens 1000TVL M7
Frequency 5.8G
Frequency Point 48CH
Transmission Rate 0.01mW/25mW (The power rate could be switched to aviod the affection to other drones when flying.)
Sensor 1/3 "CMOS
View Angle 120°FOV 150°DFOV
Image Format NTSC
Frequency Control Press Once: Channel Switch
Press 1.5s: Band Switch
Press 3s: Change the power rate output.
- Band Switch: Press the B+ button once, it change to next band when you operate the transmitter.
- Channel Switch: After select one band, press the C+ botton once, it will change to next channel.The image come out shows the connection is ok.
VR006 Goggles (Optional) Size 138*129*79mm(without...Continue Reading
Posted by DoubleEagle | Yesterday @ 08:26 PM | 252 Views
Super cool 4x4 Toy Monster Truck!!! This remote control rock crawler comes with original upper body design. So each of our 4x4 toy monster truck's will look different. How cool is that?!!!

Double Eagle (China) Ltd. is a professional toy manufacturer, with over 30 years of history, specialising on the manufacture of RC and functional toys.

Item No.:E324-003
Model Name: 1:18 4x4 Toy Monster Truck
Size of vehicle(cm):27.3*16.4*13.9
2.4GHz
Speed: 6.5km/h
Remote distance: 20 meters
Original rechargeable battery and USB charging line included

For more remote control toy products visit: http://en.doubleeagle.cc/
Business enquires: [email protected]
4x4 Toy Monster Truck - Remote Control Rock Crawler!!! (1 min 29 sec)

Posted by biglombo | Yesterday @ 05:20 PM | 339 Views
Apocalypse stargate - drone racing FPV (2 min 26 sec)


Random freestyle #2

Thanks to my sponsors:
- FOXEER http://www.foxeer.com/
- DALPROP http://dalprop.com/
- DEMONRC https://demonrc.eu/
- AIRBOT https://store.myairbot.com/
Posted by peach | Yesterday @ 12:30 PM | 719 Views
I've got the geprc mark2 bnf and only flown about five packs (all together not one flight period), and all the sudden my video feed has gotten really dark in the shadows and the colors are grainy and off, getting a rainbow of colors, and after a few minutes the video goes completely dark. I've tried contacting geprc and haven't heard back yet. Just looking for any answers. It's using the f4 span tower fc/vtx in one.
Posted by DutchRC | Yesterday @ 10:03 AM | 1,026 Views
Halloa people

You might have come across this wing because iFlight have had several short video's about it allready..
An FPV wing, but not as you know them.. Is that fair to say? I think it is

Link to this airplane: iFlight 850mm Fiberglass iWing

So in this topic I'll post my findings eventhough it's not a review (I received a pre-production sample)..
Don't hesitate to post Your findings / etc on this wing!

iFlight iWing - Not just another Wing :) - SHOW & TELL (24 min 58 sec)


Specifications:
wingspan: 850 mm
length: ??
weight: 1 - 1.3Kg All Up Weight
material: Balsa composite
kit type: PNF
motor: Xing 2208 2150 Kv
propellor: 7x4.2
ESC: 60A
servo's: 2x Digital MG
receiver: 4 channel, or SBus if you want to ad a Flight Controller
lipo: 1800 - 3300mah 4S (not included)
ailerons: 2x elevon offcourse
rudder: nope
flaps: nope
retracts: nope
lights: yes
stabeliser: nope
Posted by Bunnyshooter223 | Yesterday @ 08:16 AM | 1,084 Views
Damage to intake valve seal on an FA-50 'type ii head' as i call it. Using OS F plug.
Both valves somehow hit piston. Dunno why, am not original owner. Not the engine's fault.

Brand new Saito valves, it's the head seal. A new glow plug seemed to help a lot. But it would not idle low without dying. I would start at half-throttle or a tad more. Difficult to start when warmed up well--a lot of priming and wasted fuel (as it drips out of carb) from too many tries yet no fire.

If you never get a fire, or pop, even when cold, check glow ignitor battery.
Compression feels low; comes up a bit when primed but low overall. Sometimes erratic power at mid or lower throttle--especially with old plug.

I ran it pretty good at mid to high throttle using a 13x4 Xoar. No improvement. I want to take another look at that head seal. Not sure if its brass insert or just the newer (cheaper) plated aluminum head.

The head on mine is 'kinda rare' too as it's a 'newer FA-56(A) style.' Now, some of the early FA-56's had the original-style FA-50 head
The rest of the engine is similar to Saito's small 4-strokes. It would make a good parts engine for FA-50 thru FA-62(A). The .56 and .62 use a wider piston but otherwise are similar.

I think i'll keep this engine for parts, afterall.

All great powerful thumpers. i say that with experience bench-running them. I easily get 10,050 rpm on my other classic FA-50 with Xoar 12x6 wood propeller (on the bench). Excellent transition, control, and idle.

I believe the same-weight FA-62 can get over 9,000 rpm using a 13x6! These small Saitos are some of my favorite engines (adding to the fact they can be used in small affordable .40-size air frames).
Saito FA-62a The First Run (4 min 21 sec)


10,000+ rpm holy !
Posted by Lukelundy | May 25, 2019 @ 09:45 PM | 1,736 Views
I recently crashed my plane into a tree and it was still working (stuck in the tree) I retrieved it the following day (today) and I can’t get it to power up, I assumed the battery died and charged it for the 30 minutes until the charger showed no red led, then I plugged in the battery to the plane and it will not power up whatsoever, I’ve checked the main wires as far I can tell they all seem to be in order any help would be greatly appreciated
Posted by Bill M - RC | May 25, 2019 @ 06:15 PM | 2,016 Views
Hi fellow rc pilots & rc enthusiasts

MJX X104G review. This MJX X104G 5G WIFI FPV With 1080P Camera, GPS, Follow Me Mode. Point of Interest, Waypoint navigation RC Quadcopter drone RTF review includes unboxing, inspection, setup, app, flight, duration, range, fpv & camera tests.

You can get this MJX X104G 5G WIFI FPV With 1080P Camera, GPS, Follow Me Mode. Point of Interest, Waypoint navigation RC Quadcopter drone RTF here now: http://bit.ly/30GnTkI


MJX X104G review - GPS 5G Wifi FPV Quadcopter drone (35 min 55 sec)

Posted by Ben Petree | May 25, 2019 @ 03:00 PM | 2,110 Views
I recently bought a 13x6 two blade prop for my eflite turbo timber 1.5m, and am curious what others who've done this conversion are using for spinners? I'm not sure what will fit the longer collet on this plane.
Posted by Digiflier | May 25, 2019 @ 10:21 AM | 2,228 Views
Posted by GroundControlRC | May 25, 2019 @ 09:54 AM | 2,238 Views
DustOff #6 - XK A600 DHC-2 Beaver Bush Plane in a 3-4mph Wind ;-)



Here is a link to the Video:
https://www.youtube.com/watch?v=haFv5jcWsUk

Let's blow the dust off this plane ;-)
It has a lot of lift so flying in some wind can be fun ;-)

Here are links to this plane and spare batteries:

Link to this Plane:

XK DHC-2 DHC2 A600 5CH 3D6G System Brushless RC Airplane Compatible Futaba RTF
https://www.banggood.com/XK-A600-4CH...47791920140372

Spare Batteries:

XK DHC-2 A600 RC Airplane Spare Parts 7.4V 300mAh 25C Li-po Battery
https://www.banggood.com/XK-DHC-2-A6...47791920140372

Turnigy nano-tech 300mAh 2S 35~70C Lipo
https://hobbyking.com/en_us/turnigy-...asc=5382684821


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/
Posted by XBStation | May 25, 2019 @ 08:33 AM | 2,188 Views
Happy Weeokend! We hope your week starts out well.
We did a short Flight WITHOUT RC Transmitter and Datalink, only use 4G LTE to control our Fixed Wing.
And the result are very good, feels like we were a bird .
Link video:
5.7 km Fixed Wing Flight With Joystick via 4G LTE (4 min 56 sec)

Posted by TMacFPV | May 25, 2019 @ 08:26 AM | 2,273 Views
A few videos ago, we asked the question which frame should we use to build our 3-Inch Micro FPV Quadcopter, the FlexRC Ascent 3 HD or the HGLRC Arrow 3 Hybrid. At that time "The People's Choice" was the FlexRC Ascent 3 HD and it has turned out to be my favorite flyer-Thank You!

Now, we build out the other 3 inch drone frame, the HGLRC Arrow 3 Hybrid. Why is it a “hybrid?” The front arms are a stretched-X type (narrower) and the rear arms are a “normal-X” type (standard). Theoretically, this "hybrid configuration" should create more stability on the pitch axis and enable smoother and tighter cornering around turns (like on rails!). FPV FlightClub has used this hybrid configuration in their latest racing frames the 5" Proton-R and Neutron-R. One of the (if not, THE) best FPV Race Pilots in the world, Captainvanover, is running this hybrid setup starting this race season!

We complete our Hybrid 3 Inch Drone Build with our own custom components (not the ones which come with the BNF version of this HGLRC Arrow 3 Quad). In the video, we show a complete list of the components we use along with each of their weights, the overall dry weight of the build and the All-Up Weight along with the Thrust-to-Weight Ratio of this build in comparison with that of the FlexRC Ascent 3 HD. Guess which one wins that contest! What do you think of this Hybrid configuration? Also, the 2nd of 3 “Keywords” is revealed to unlock the Mystery of our upcoming announcement. Take a Guess for your chance to Win!
3 INCH DRONE BUILD (7 min 21 sec)

Posted by santanig5 | May 25, 2019 @ 07:06 AM | 2,314 Views
Wingspan 1042mm / 41.0in
Overall Length 1226mm / 48.3in
Flying Weight Around 2500g
Motor Size 3270-KV1930 inner running
ESC 100A with 8A BEC
Servo 13g Analog Metal Gear Servo* 8pcs
Radio 6 Channel
CG (center of gravity) 90-100 mm
Recommended Battery 6S 4000mAh 35C
Flaps Yes
Retracts Yes
Approx. Flying Duration 4-5 Minutes




FMS 80mm Bae Hawk Maiden Flight (3 min 48 sec)