Posted by Digiflier | Today @ 06:23 PM | 19 Views
Shot at a recent Open House Fly-In event at the Burnaby Lake Flyers field.
Posted by wayne65 | Today @ 02:37 PM | 130 Views
I have a FeiBao 1/7 scale F-5 for sale

. I set up the jet as a 120mm EDF. I still have the split Turbine pipe, fuel tanks, intakes and small other items to convert back to Turbine.
You will have to install wood mounts to install your Turbine. The front nose wood mount needs fixing (ran off the runway into the grass )...Daaaaa
Comes with a 9ch X spectrum receiver. The flight stabilizer is an Eagle tree guardian. Air Breaks and all the servos
I used a 3 cell 2200 for the BEC Pro receiver power and two 6 cell 5000 battery packs to fly it.
The jet WILL NOT come with the 120mm EDF unit or the 160 HV ESC.

I will take $1700 for it, I have Paypal. you will have to pay for boxing and shipping or pick up in KY zip 40160.

I am starting a new project and the Boss said "Clean out the hanger".
I am King of the castle ,,,,,, when she's not home.....

Feel free to PM me for any questions and photos.

Thanks for looking.

wayne



Images View all Images in thread
Name: Waynes F-5 left side view.jpg Views: 82 Size: 174.3 KB Description: Views: 82


Name: Waynes F-5 frount nose view.jpg Views: 73 Size: 54.5 KB Description: Views: 73


Name: 20180213_193024.jpg Views: 103 Size: 822.2 KB Description: Views: 103


Name: 20180223_170850.jpg Views: 69 Size: 2.64 MB Description: Views: 69
Posted by basslord1124 | Today @ 02:22 PM | 146 Views
After working through some of the kinks with the FT Simple Cub, I managed to add another kink by bending the prop shaft. I had actually never done that before. But I guess all that lawn darting can lead to it. I didn't even realize it had happened until I had done some repairs and was ready to fly it again.

FT Simple Cub... Bent motor/prop shaft? (2 min 2 sec)

Posted by slidewaysgts | Today @ 12:29 PM | 196 Views
Got this kit from sunset models as a shrank down version of the 120 kit. The stick sizes weren’t scaled down to standard size so 3/8 spruce was just too small for spars. 1cm carbon square used instead. Wing is SOLID so far.
Posted by Jantje66 | Today @ 08:22 AM | 298 Views
A while ago (2005) I build this catamaran with 2 Phoenix 125 speed controlers and 2 Graupner inline 700m 24v. brushless motors.
The first time I went sailing, the 2x 16 NiMh cells melted!
So i parked the boat and recently i dusted the thing and decided to try again.
I bought 2 LiPo 6s 22.2v 5400Mah and tried my luck... and failed. Again.
The double speedcontrolers where fried while testing the motors and setup.
Now i need two new speed controlers who can stand the heat, abuse and the current.
Can anyone give mee advice?
I would like to enjoy this boat and stop putting money in this project.

Trying an other hobby is not the answer i expect :-)
Posted by marblekit | Today @ 01:16 AM | 527 Views
Posted by wattechighland | Yesterday @ 11:03 PM | 587 Views
今回はFRPでWTCを作るつもりです。 WTC(water tight compartment)...not cylinder
ハルの内側の突起物ははルーターで削り落とし。
Name: 01IMG_2716.jpg
Views: 0
Size: 87.8 KB
Description:
Name: 02IMG_2717.jpg
Views: 0
Size: 86.2 KB
Description:
マグネットを4か所仕込むところまで。当初8か所にするつもりでしたが、磁力が強いので4か所に減らしても 可かと。
...Continue Reading
Posted by DoubleEagle | Yesterday @ 08:38 PM | 647 Views
Item No.:E564-003
Model Name: 1:20 RC Mercedes-Benz Arocs Container Truck
Size of vehicle (cm): 60.6*16.1*21.7
2.4GHz
Radio controlled: trailer split joints, trailer hight level control.
Speed: 10km/h
Remote distance: 20 meters;
Simulated Lights/Sounds (mute button)
Rechargeable battery and USB charging line included
For more products visit: http://en.doubleeagle.cc/
Business enquire: [email protected]
Double-Eagle Rc 1:20 Mercedes Container Truck Model toys (0 min 58 sec)

Posted by Bill M - RC | Yesterday @ 06:54 PM | 697 Views
Hi fellow rc pilots & rc enthusiasts

Makerfire Happymodel 3s 11 1v 300mah HV30 60C Lipo battery review. Suitable for power whoops like a HappyModel Mobula 7 HD, FullSpeed Tinyleader, 75mm Crazybee F4 Pro CineWhoop, URUAV UR85/UR85HK etc. I test performance & duration on a Fullspeed Tinyleader HD CineWhoop.

You can get these Makerfire Happymodel 3S 11.4V 300mah Lipo Batteries HV 30C/60C with XT30 connector in uk here: https://amzn.to/2HBE7Tz

You can get these Makerfire Happymodel 3S 11.4V 300mah Lipo Batteries HV 30C/60C with XT30 connector internationally here: http://bit.ly/2WS9S1d


Makerfire Happymodel 3s 11 1v 300mah HV30-60C Lipo battery review (7 min 19 sec)

Posted by deenice57 | Yesterday @ 04:33 PM | 752 Views
My max 5 lost power have to turn it off and on the red light be blinking can someone help
Posted by unboxingexp | Yesterday @ 03:56 AM | 1,121 Views
Balancing DJI's Ronin-S (2 min 22 sec)

Posted by old4570 | Yesterday @ 12:28 AM | 1,217 Views
It occurred to me ...
That part of the problem lies with the way the pod is a attached to the boom .
3 screws holding it in place to a carbon plate ..
So a lot of force is applied to 3 very small places on launch ..

So before a problem arises , why not just epoxy the pod in place ?
Create a much larger area to distribute launch energy into !
Anyhow , that's what I have done with the Raven 990 ..
I fibreglass reinforced the pod , then glued it in ..
When the Epoxy dries , it should distribute load much more evenly over a much larger area .. ( + the fibreglass wont hurt too much - I hope )
That vertical fin is still weak as ! Next time it breaks , I will cut it out and rebuild it with more carbon reinforcing .