Posted by Tazkiller85 | Aug 07, 2019 @ 05:08 AM | 834 Views
Yep Les Amis,
Mais jusqu'où s'arrêteront ils ??? LOL ... On se retrouve aujourd'hui pour le montage et test du TYRO129. Eachine frappe fort encore une fois en nous proposant un 7" avec GPS pour la somme ridicule de 100€ ! D'accord, ce n'est pas un racer haut de gamme, mais il se défend plutôt bien et après quelques tests (et crash), je peux affirmer qu'on en a pour son argent . Le montage est simple (avec notice dispo en plus ) , les réglages sont déjà faits ainsi que la programmation du GPS. Les résultats ne sont pas excellents niveau rendu d'image HD car à cause du vent ce jour là, j'avais pas mal d'oscillations mais pas forcément de jello. En bref, en attendant d'autres tests, je pense que le TYRO129 est un excellent racer d'entrainement pour un prix défiant toute concurrence !! Bon Film à tous .. Et bon vol.

Eachine TYRO129 - Review Test Démo - Racer 7" avec GPS à 100€ !!! (35 min 58 sec)


NOTATAZ : 18.5/20 Rapport qualité prix Imbattable !

Niveau : Débutants et Confirmés
Les + : Pas cher ! Costaud, Faible consommation, Bonne portée vidéo, Facile à assembler (Pas beaucoup de soudures) ...
Les - : Comme beaucoup de 7", pas mal d'oscillations mais beaucoup trop de vent ce jour là ... A voir, les reglages PIDs et un jour plus calme

- Si Vous voulez aider la chaîne avec un don : https://streamlabs.com/Tazkiller85

- TYRO 129 (Coupon BGtyro129 ou AFfbG10 ou BGWK129 ) : http://bit.ly/2yuA4UW
- Gaine Nylon (...Continue Reading
Posted by myrcmodel | Aug 07, 2019 @ 04:47 AM | 771 Views
Quite busy recently.

The Jumper T16 Plus with hall gimbal is available, check here https://www.rc-wing.com/jumper-t16-h...ansmitter.html

Seperate hall gimbals for T16 is availabl here. $15 for one pair!!!!

Main Features:
STM32F429BIT6 MCU
Industrial grade 4.3 inch 480*272 outdoor readable color screen
Compatible with JumperTX and OpenTX firmware
Wheel menu button
Hall Sensor Gimbal
Multi-protocol transmitter module with TBS CRSF support
Removable battery
Supports Telemetry
Memory 16M (can be expanded by TF card)
Voice function
Vibration reminder function
Standard JR module slot
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Two-color LED status display

Basic Specifications:
Item Brand: Jumper
Item Model: Jumper T16 Plus
Size: 180*190*58
Weight: 798g
Voltage: DC7-8.4V
Battery: 2 x 18650 or 2S lipo (batteries not included)
Current: 350mah (NO CRSF)
Channel: 16CH

JP4-in-1 Specifications:
Working voltage: 6-9v
Working current: <=100ma
Operating frequency: 2.4G ISM band
RF power: +22DBM
Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna)
Net Weight: 42g (including antenna)
Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x
Firmware updatable: Yes, via USB.
Posted by Ivy long | Aug 07, 2019 @ 04:32 AM | 705 Views
HTRC T150 is a new charger of our company.
Specification:
Model No:HT-0100
Input: AC 100-240V / DC 11-18V
Charge power:Max 150W
Discharge power:Max 10W
Charge current range:0.1-10A
Discharge current range:0.1-2A
Lilon/LiPo/LiFe/LiHV cell count :1-6cells
NiCd/NiMH battery cell count:1-15cells
PB Battery voltage:2-20V
Smart battery:I/II/III
Current drain for balancing: 500mA/cell
Net Weight:0.48kg
Dimension:145*105*64mm
Gross weight:0.80kg
Package size:215*155*75mm

AND, Today is Chinese Valentine's Day, wish your sweet love will last forever!😄😄
Posted by nigelsheffield | Aug 07, 2019 @ 03:30 AM | 896 Views
Use. Code NIGELSHEFFIELD for 15% off.

https://bit.ly/2KmRwS9

I used QWinOut a few times already and they're prices and service is great, cheaper than banggood and good communication.
They were xt-xinte but this site has free postage and no PayPal charges and STILL cheap prices.

I just received my full speed toothpick pro which costs $106 with the discount link above.

Lots of good stuff there and I think will be using them a lot from now on. (bviously checking banggood prices too lol )
Posted by old4570 | Aug 07, 2019 @ 02:36 AM | 840 Views
FMS 800 V tail maiden (8 min 32 sec)


FMS 800 V tail
Flying weight 156 grams
CG @ 40mm from L/E
Nanotech 370mAh 2s
FS2A micro Rx (4ch)

1) FMS 800 V tail
Flew off the board so to speak , no rates / no expo .
The model does need some down elevator trim , but I will take care of that next time with some sub trim .
Most of the flight was about 50% throttle .

2) CG
The CG ended up being about 40mm from the L/E . Instruction manual say's 35mm and I would say that was a fair call .
At 40mm it's not overly sensitive ( no rates - no expo ) . But the model does turn tight .

3) Nanotech 370 2s
This is the battery I chose , it was doing nothing !
8 and a half minutes of flight and my battery checker say's 40% battery left . ( Mostly 50% throttle )

4) Flying weight ( 156 grams )
Originally it was 154 grams , but I needed to stuff some weight up the models bee hive to get a better CG than 25mm from the L/E
Love the weight , it simply allows the FMS 800 V tail to fly really slow . Once the elevator is trimmed so that the model does not climb but rather holds straight and level . It will be a joy to fly slow .

5) Stability
Yes and no . It is very stable . But that straight wing does effect roll stability . So attention is needed , and no - it's not really a hands off model . No where as bad as say the MG800 , but not as good as say a Firstar 200 .

6) Propeller
Yeah , not the best - that's for sure !
Yes you can fly @ 50% throttle , but not much less than that as...Continue Reading
Posted by UnknownForces RC | Aug 07, 2019 @ 01:33 AM | 744 Views
Large capacity battery box of GX1 electric buggy 4wd (0 min 28 sec)


The battery box has large and captive quick closures. Fully enclosed with reinforcement strip batteries box. Improve structural strength and offer additional protection to your valuable batteries.
Posted by marblekit | Aug 06, 2019 @ 08:15 PM | 736 Views
Posted by marblekit | Aug 06, 2019 @ 08:14 PM | 726 Views
Posted by marblekit | Aug 06, 2019 @ 08:11 PM | 709 Views
Posted by aben71 | Aug 06, 2019 @ 07:30 PM | 759 Views
Happymodel mobula7 is without a doubt my favorite backyard fpv quadcopter!I bought the dsm2 version and got a little confused with the bind proceedure,you have to bind it using betaflight,no bind button. Once I sorted that out it was up up and awesome!
Posted by Merch | Aug 06, 2019 @ 11:18 AM | 881 Views
Eachine E520S GPS WIFI FPV With 4K/1080P HD Camera 16mins Flight Time Foldable RC Drone Quadcopter - 5G WiFi 1080P


Looks like someone stood on the box i can't get the compass or gyro to calibrate even with 14+ satellites









Description:
Brand Name: Eachine
Item NO.: E520S
Frequency: 2.4G
Channel: 4CH
G-yro: 6 axis
Motor: 8*23mm Brushed Coreless
Quadcopter Battery: 7.4V 1200mAh Lipo (Included)
Transmitter Battery: 4 x 1.5 AAA Battery (NOT Included)
Flying Time: 14-16mins
Charging Time: 120-150mins
R/C Distance: 200-300m
Flying Weight: 280g (with Battery)
Color: Black
Camera Optional: 720P / 2.4G WiFi 1080P / 5G WiFi 1080P / 2.4G WiFi 4K HD / 5G WiFi 4K HD
FOV: 120° Wide Angle
Pixel: 720P--Picture/Video: 1280*720
1080P--Picture: 1920*1088, Video: 1280*720 (Saved on Mobile Phone)
1080P--Picture: 1920*1088, Video: 1920*1080 (Saved on SD Card)
4K--Picture/Video: 3840*2160 (support IOS 6 or above and Android high-end system)
4K--Picture/Video: 2560*1440 (Saved on SD Card)
WiFi Distance: 2.4G WiFi: 50-70m
5G WiFi: 150-250m
Quad's Size: 40*28*7.5cm (the arms not folded, with props guard)
15*11*7.5cm (the arms folded)

Features:
- With foldable arm, small size, easy to carry.
- GPS positioning mode provides a more accurate flight.
- With 5G / 2.4G wifi function can be connected APP, APK system to take pictures/video, real-time transmission...Continue Reading
Posted by GroundControlRC | Aug 06, 2019 @ 08:20 AM | 676 Views
Flight #14 - King Kong/LDARC Tiny Wing 450 FPV Test Flight!



Here is a link to the Video:
https://www.youtube.com/watch?v=NoIdOGNr6i0

This item is courtesy of Banggood.
I thought this Tiny Wing would make for an excellent Micro FPV Wing ;-)
It has several flight modes; 6-axis, 3-axis, and manual.
It's made from EPP Foam which should make it extremely durable ;-)

I installed a Micro FPV System and with the 2S 450mah 35C LIPO I use it puts the CG (Neutral Balance) right at the channel for the Servo Wires ;-)
I think that's very close to where it needs to be.
If I can ever get less than 5mph wind I'll be able to confirm that in Manual Mode.
This is the very first flight with an FPV System!

It's time to test out the FPV System!

The orange curve at the top and bottom right is a section of the canopy in view because I didn't get the camera positioned just right.
When to camera is positioned just right you not see any obstructions.

Get one today from Banggood!

Here is a link to the Micro AIO FPV Camera:

Turbowing 5.8G 48CH 25mw 700TVL 1/4 CMOS Wide Angle FPV Camera Support OSD NTSC/PAL Switchable

https://www.banggood.com/48CH-25mw-T...47791920140372

Here is a link to the SBEC (Switching Voltage Regulator):

Pololu 3.3V, 300mA Step-Down Voltage Regulator D24V3F3
https://www.pololu.com/product/2097

Here is a link to this Cool Micro Wing:

KINGKONG/LDARC TINY WING 450mm Wingspan EPP FPV PNP With Flight Control
https://www.banggood.com/...Continue Reading
Posted by halicopter | Aug 06, 2019 @ 06:43 AM | 628 Views
Not been on for ages still flying and loving my k110 ...however couldn't resist this new k130. Omg what a beast....the power to weight ratio it's crazy . Only had 4 packs through it on a windy day (lots of adrenaline pumping ).