um nut's blog View Details
Posted by um nut | Nov 06, 2016 @ 08:20 PM | 2,703 Views
I decided to repurpose one of my parts planes.
Starting out as a parkzone micro 210, it was battered and the tailfeathers were missing so I decided that it should undergo a makeover and fly again.
I proceeded to cut off the back half of the fuselage and reposition the servo rods in order to create a Cessna 336 skymaster. The tail booms are made from dollar tree foam board and the control surfaces are 1mm depron and I made new control horns from an old DVD case.

I still have to stiffen the booms control serfaces.
Posted by um nut | Feb 27, 2014 @ 01:15 AM | 3,873 Views
I have decided to postpone my micro pacer and work on my entries for the Scale Build-Off 3. Here is the link

As for the pacer it is almost ready to fly. Still needed are, electronics and covering.
Posted by um nut | Feb 19, 2014 @ 06:56 PM | 4,180 Views
just more pics with more to come Name: 116_4360.jpg
Views: 79
Size: 1.12 MB

Name: 116_4361.jpg
Views: 86
Size: 1,020.4 KB

...Continue Reading
Posted by um nut | Feb 19, 2014 @ 06:30 PM | 4,231 Views
The last post I made for this the pics did not work, I hope this time they will.
There are no formers other than toothpicks to hold the shape while I assembled it and carbon fiber rod for the spar....Continue Reading
Posted by um nut | Jan 29, 2014 @ 07:25 PM | 3,959 Views
Here is a kind of build log for a kind of nano pacer. About a 8 inch wingspan made from dollar tree foam plates. more photos and maybe some videos coming later.Attachment 6461230

Attachment 6461231

Attachment 6461232

Attachment 6461233

Attachment 6461234

Attachment 6461375

Attachment 6461376

Attachment 6461377

Attachment 6461378

Attachment 6461379

Attachment 6461380

Attachment 6461381

Attachment 6461382
Posted by um nut | Jun 12, 2013 @ 11:13 PM | 4,230 Views
Here are some pics of what I have so far. The wing is a hobbyzone champ wing, the tail will be a modified champ tail. I still need to decide what to use for the electronics, if you have any ideas let me know. Thanks for looking.
Posted by um nut | Feb 25, 2013 @ 09:48 PM | 4,269 Views
Hi guys, something new here, Just an idea, but it is turning into a ultra micro Volmer jenson vj22 seaplane. I may post pics and a build log later. If anyone has any ideas let me know. It's fuse is made out of epp foam. The airplane will be about the size of the hobbyzone champ and will use some of the same components.

Thanks for viewing, um nut