jlk69's blog View Details
Posted by jlk69 | Oct 07, 2021 @ 12:26 AM | 11,569 Views
Here are pictures of the parts I have for the Starmax P-51. There are no electronics except the very cheap stock main and tail wheel retracts with struts and wheels and aileron and flap servos. Plus I have a set of brand new prop blades and an extra set of main retracts and main struts with wheels....Continue Reading
Posted by jlk69 | Oct 12, 2013 @ 10:08 AM | 9,326 Views
Here is my eepe file. Almost the same as a mcpx file BTW. I hope this helps.
Posted by jlk69 | Jul 15, 2013 @ 09:33 PM | 9,521 Views
[/IMG][/IMG]...Continue Reading
Posted by jlk69 | Aug 16, 2012 @ 08:56 PM | 10,379 Views
Picture of spray nozzle used to attach body together.
Posted by jlk69 | Jul 09, 2012 @ 11:18 PM | 10,971 Views
Here are a couple of pictures of my mCP X Rx. While soldering the signal wire for the ESC to the motor fet I think I got the fet just to right too hot and now I can't bind Rx with Tx. After plugging in battery I do not get the slow blink of the blue light but only a fast blink. Hold the boat, got it to bind with another battery but looks like the motor was bad all along. However I will do more tests and report back my findings.
Posted by jlk69 | Apr 23, 2012 @ 04:42 PM | 11,442 Views
This is the cable that I got from HobbyKing that is supposed to allow me to hook up my Turnigy 9x to my PC and use the Phoenix RC Sim. Is this the correct cable because I don't see any of these plugs on my Tx except the audio patch cable. I think I got the wrong package.
Posted by jlk69 | Apr 23, 2012 @ 04:37 PM | 10,189 Views
I was able to transplant the part that broke on my S-107 Tx from my "fake" S-107 Tx. I included pictures of the broken part (glued back together) and the donor Tx to show you where that part came from. The donor part was plastic but the part that broke was pot metal. I had to unsolder the legs from the board and take apart that metal cage then swap out the part.