At first I was getting a flashing red LED on Tx. I sent it to Mike(Dragonlink). It came back & now I get the solid green on Tx. I am now trying to bind to V2 Rx. I hold the bind button & power on the Tx. Yellow/orange light comes on, I release the bind button...rapid flashing yellow/orange LED. I power on the Rx and I get a solid red LED & a flashing green LED. I let sit like this for about a minute(Tx...flashing yellow. Rx....1 solid red LED & 1 flashing green). I power off the Tx. No changes to Rx LEDs. I cycle the Tx and Rx power. Still I have 1 solid red and 1 flashing green on Rx with NO blue light. Solid green LED on the Tx.

Is there a problem with the DL system or am I doing something wrong? Someone please help!!!🙏🙏🙏

Hello RcGroups. I am really close to punching a hole in the wall. There has to be someone out there who can help me.

1st a brief recap to familiarize you with my experience & skill level. I am currently on my 3rd drone build. Prior to drone I was into racing & mostly bashing 1/10 & 1/8 rc cars & trucks. I decided I wanted take a shot at flying helicopters. While researching r/c copter I stumbled upon quadcopters. I was very close to purchasing a 3dr iris before it was brought to my attention that I can BUILD my own drone. So, that's what I did. With no flying experience at all I built a 750 Y6. I used the HKPilot32, Dragonlink V2 and a FlySky FS THX radio. I had everything working ok. It flew alright...I guess, for a beginner. After a few crashes I decided to shelve it and start another...from scratch. For my 2nd build I used a 700 quad with the Tarot ZYX-M flight controller and the Taranis x9d/x8r. After a little more than a year, several crashes & repairs, it is still going strong. I think its an awesome piece of machinery, for a beginner. Now that I'm feeling confident about building & flying, I now, want to build a 3rd. Its another 700 quad. For this one I'm using the HKPilot32 & Dragonlink from my 1st build. Even though the FlySky radio did work ok with the Dragonlink I didn't really care for it mainly because the manual was Chinese & the customer service was nonexistent. I liked the Taranis so much from my 2nd build I decided to buy a...Continue Reading