Archive for November, 2018
-
Views: 204
First step was to remove the plywood tray that extends back to the bulkhead near the wing leading edge. -
Views: 205
-
Views: 219
-
Views: 199
-
Views: 212
-
Views: 233
The first cut was in front of it's final location. I kept making 1mm cuts plus the saw kerf until it fitted. I intially wanted to use the outrunner in the background but it was too big. The motor case rubbed on the fuse -
Views: 233
Trial fitting .... squeezing the fuse from oval to round. -
Views: 230
12.5mm (1/2") from the front of the canopy to the front of the fuselage.
Comments (17)
Add Comment
