Posted by Helen_AGFrc | Today @ 02:26 AM | 79 Views
It is happy to show you the another new product before 2022!
We are not only producing the servo, but also capable to the make the CNC parts.
Name: 齿轮合照 (1).jpg
Views: 0
Size: 342.4 KB

Here comes the AGFRC upgrade part hardened steel MOD1 8mm 30T and 40T pinion gear are in stock. Improved 40T gear with total 12mm height and small lip on the back side for spacer. Perfect for High Speed Runs and Drag Racing Cars.
It can suit your fancy Traxxas/Arrma/Hobao/Losi/HPI/OFNA /Mugen/ Serpent /XLX /XL2 1/8 scale buggy and truggy conversions.
Name: 40T M1 8MM Pinion Gear.jpg
Views: 0
Size: 184.4 KB

High Precision CNC Machining
Super Strong 8mm diameter shaft
Light Weight With Through-hole Design
Ultra Strong and Durable Steel Material
Smooth and Reliable Operation in extreme RC conditions

Specification of PG40T8
Weight: 46.8g
Height: 12mm
Screw Hole: M4 Set Screw
More info here:
...Continue Reading
Posted by Justapoke | Today @ 02:11 AM | 144 Views
Welcome 2: The Not So New Normal (off-topic) Cafe

Always open - 24 hours a day 7 days of the week - We never Lock-down!
Everybody welcome here, no passport or QR checks at the door, we do not exclude or discriminate!

Coffee and Club Tropicana drinks are free, all others and snacks excluded from Taxes.
Socialise and share ideas, everyday Life, The Universe, and Politics, the Hobby, Everything = welcome here!

This topic was created because of this post that started an of-topic conversation on my other blog:

So let's pick up from where we left, and continue from here in this fun and friendly created new blog!.
Please respect each others opinions and share any good info and ideas.

- I will share my ideas and any new info regarding Covid-1984 that I find, I welcome any others opinions and info.
Worldwide, no matter your color or political views!

As Covid-19 effects ALL of us that subject may remain for a while, but for sure anything other goes as well.
Remember life should be fun! If we try to come together than that is a good start!

(Normal RCG rules do apply here)

Posted by oscar35 | Yesterday @ 09:10 PM | 1,163 Views
I have been very lucky to find and buy one of these fantastic engines. Brand new with muffler and 6 glow plugs. Can't wait till it arrives. I might put it in a Midwest Mustang that I have had for years. Never built. Will post pics.
Posted by RC Roundtable | Yesterday @ 03:13 PM | 2,429 Views
Episode 141: "Round Top Recap" is now live!

In this episode, the gang talks about all the cool stuff they saw and did at the inaugural Round Top RC Expo.
-Welcome to Round Top (1:50)
-HUGE Triplane (14:15)
-Fitz's Fleet (36:30)
-Swap stories (52:10)
-Terry's workbench (1:14:15)
-Leprechaun maiden (1:20:40)
-B-25 status (1:29:10)

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us an email: [email protected].
Posted by Swanlander | Yesterday @ 12:39 PM | 2,566 Views
Avro Vulcan Bomber (4 min 21 sec)

Posted by Quagga75 | Yesterday @ 10:54 AM | 2,900 Views
A digital recreation of my favourite Slopie from the Nineties.
The .flz file can be opened with and exported to .dxf etc.
Posted by Old_Pilot | Yesterday @ 09:38 AM | 3,248 Views
Das Ugly Glider - Part 6

Got the motor and folding prop fitted and balanced, installed the battery and ESC, checked the weight so far (31 oz), and then put her on the CG balance.....right smack dab where she's supposed to (20% of MAC). I figure that the covering will add another 2 ounces (9.5 sq ft) so the estimated AUW will be 33 oz. Projected wing loading will be 33 oz/ 3.41 sq ft = 9.67 oz/sq ft.....Couldn't be more pleased
Posted by Tazkiller85 | Yesterday @ 06:03 AM | 3,986 Views
🧐Yep Les Amis,
Mini Crash-Test, Maxi rsistance ! Dans cette semaine spciale voitures RC, nous allons commenc par le test de la nouvelle Wltoys 284131. Une petite voiture de drift type rallye qui en a sous la pdale ! Trs compacte et bien quipe avec ses nombreux LEDS, ce petit vhicule sera aussi l'aise en intrieur qu'en extrieur (en vitant les gravillons, sable etc ... ). Parfaite pour toute la famille, experts ou dbutants, avec son rglage de puissance et extrmement durable mme en cas de choc assez violent ! Avec un tarif aux alentours des 50, cette nouvelle Wltoys trouvera certainement sa place sous le sapin, perso, je valide ! ... Prenez soin de vous (et des autres) et merci tous pour votre soutien .

WLTOYS 284131 Mini RC rally & drift 1/28 - Review Test Démo - Pour toute la famille (21 min 46 sec)

🧐NOTATAZ : 18/20 Costaud la petite !!!

- Wltoys 284131 Drift car (coupon BG38db1f ):
- Pices dtaches et Upgrade :
- Wltoys K989 (coupon BGVehicles10) :
- Wltoys K969 (coupon BGVehicles10):
- JIMI JM - GNT80 ( 30 avec le coupon BG2c1997 ) :
- Gilet chauffant :

- TABLEAU DES...Continue Reading
Posted by NobatteryNopower | Yesterday @ 04:23 AM | 4,387 Views
These are my findings so far in controlling a WS2812 ledstrip via RC control (PWM signal) - This post will be update when I make progress. My project doesn't work correct yet. Still some debugging to do. The code will be posted once it works.

LEDs used are WS2812. In my case two strips of Matek. (see attachment)

First result tinkering with Arduino. Bug fixes needed: Leds need to start on LOW / Off, and they light up, but never turn off when decreasing PWM
Arduino WS2812 control with PWM - Not quite there yet (0 min 20 sec)

Posted by Old_Pilot | Nov 30, 2021 @ 05:04 PM | 7,734 Views
Just waiting on covering material now
Posted by burkefj | Nov 30, 2021 @ 03:31 PM | 8,019 Views
Hi all, here are two that I just finished. They are upscales of R/C rocket glider kits I have produced in 2.6" diameter, but these are one off's just for me using BT-101 tubing and 3-d lightweight printed cones from Scott Binder, most markings from stickershock with some hand cut accents and fine line sharpie detailing. Both have very similar specs, 33-37" wingspan, 56-60" lengths, weights dry 24.5 ounces as shown, with 29mm H-13 longburn motor, add 7.25oz for rtf weight.
Uses 9mm depron sheet for flight surfaces with 1/8" carbon spar reinforcement. Pretty happy with how they turned out. They both use tail surfaces only for roll and pitch like the smaller versions.

First is an Orbital Sciences Pegasus XL Second is an upscale of the Estes Space Transporter America with wing upsized for glide(which looks more proportional to me than the original).

Waiting for some more springlike weather and my latest rocket motor order to arrive for maidens.

Posted by kopterheld | Nov 30, 2021 @ 03:31 PM | 7,964 Views

Here I show how to load a FrSky R9M 2019 ACCESS module with ExpressLRS firmware and use it with an R9MM receiver. So there is the best firmware for old hardware that reaches a range of over 35km.

ExpressLRS -
Radiomaster TX16S -
FrSky Taranis Q X7 -
FrSky R9M 2019 -

My video (EN subtitle) -
ExpressLRS 868mHz mit FrSky R9M Modul und Taranis Q X7 (8 min 1 sec)

FrSky R9M and Lite 868mhz can be operated with ExpressLRS. On the right the R9MX and R9MM receivers

...Continue Reading
Posted by Mad_angler1 | Nov 30, 2021 @ 01:09 PM | 8,866 Views

DJI Ocusync The Story So Far

Discussing the DJI Ocusync system and how its changed since it first released on the Mavic Pro and now is unto to O3+ on the new DJI Mavic 3.

We also look at why the Mavic 3 may not be compatible with the DJI Smart controller and Ocusync 2.

DJI Ocusync & The Mavic 3 - The Story So Far (26 min 20 sec)

Posted by USKP01261 | Nov 30, 2021 @ 07:56 AM | 10,244 Views
MODEL: Sunriser
DESIGNER: Jamara (germany)
DATE: 1995-ish
WING SPAN (in): 97.5
WING AREA (in^2): 608
AIRFOIL: Eppler 205
LENGTH (in): 48.5
AUW (oz): 48.5
W/L(oz/sq-ft): 11.5
POWER: turnigy 2830 motor with (I think) 10x6 prop
NOTES: Very nifty twin boom design (nifty but fragile). This was from an ARF kit w/ some mods to wing joiner areas for additional shear web/strength. Per the notes on the manual: The well-known record pilot Dr. Hackstein, set two world records with a flight time of approx. 10 hours and a distance of 240 km. Modified fuse for brushless motor. Larger than necessary 3S, 11.1V, 2200 mah lipo and 4.8v, sub-c 3600 mah receiver battery - I think because it was designed for large NiCd battery needed the additional weight in the nose to get proper CG. Original RCM, review published AUW was ~50oz so not too far off of that.
Posted by old4570 | Nov 29, 2021 @ 06:15 PM | 15,398 Views
FMS800 Vtail (5 min 45 sec)

I haven't flown this in a long time ..
The conditions were really sweet , the 800 just needed a little trim ..
Anyone that likes a really gentle flying model ..

This one has a Hobby King folding prop and almost the entire flight was @ 50% throttle .
Posted by rtl | Nov 29, 2021 @ 04:46 PM | 15,901 Views
Like anything else, learning whats involved in a new hobby is the first step to taking it on. From figuring out what tools youll need, finding a place to store essentials and creating an organized place to work and play, its always important to do some preparation. That is especially true for aviation modeling.

Aviation modeling is a lot more than kits and parts. Before you even open your first kit, you need a dedicated space where the magic happens. Having a prepped location ready for your first build will make the whole process much easier (and a lot more fun) so thats why were sharing these tips.

Lets get started!

Dedicated Location

First off, youll enjoy your build more if you have a dedicated space. You need the freedom to spread out and stay organized. It will make a big difference when you dont have to clean up in the middle of your project (or worry about the family pup getting into your small-parts pile).

If you have a spare room you have the perfect space and an old table is all you really need. You can also use plywood and sawhorses if they are sturdy. Once you find the perfect spot with a solid and flat work surface, youre ready to start adding tools.

Building Boards

Few modelers build directly on their work table. They often use building boards with a cork top surface. These soft-top building boards allow modeling pins to be pushed into their surface so you can hold all the parts of a build kit safely in place.

...Continue Reading
Posted by pinstripelounge | Nov 29, 2021 @ 01:36 PM | 16,483 Views
Sears 1988 Wish Book!


If anyone enjoys these old catalogs, you can check out more at christmas.musetechnical.
Posted by pinstripelounge | Nov 29, 2021 @ 10:53 AM | 17,110 Views
JCpenney christmas catalog from 1989!

They even accepted checks and money orders then, no paypal!

If anyone enjoys these old catalogs, you can check out more at christmas.musetechnical.