Posted by TMacFPV | Today @ 11:05 AM | 52 Views
Couldn't find the type of frame I wanted readily available. Was looking for a lightweight, high-performance, "True-X," Stretch-X, or Hybrid-X Micro frame with HD video capability in a dual-stack configuration.

So, I designed my own! My first design - the TMac Diamondback Rattler!

Please, let me know what you think. Like it, don't like it? Reasons for either? Let me know! I go over all the spec's dimensions, and thoughts behind the purposeful design wit a flight demo at the end. Check out the hyperlinked Table of Contents in the video description if you'd like.

I personally am very happy with how it turned out and it flies outstandingly! 🤩

Posted by jetpilotrich | Today @ 10:43 AM | 78 Views
Check this Windy day maiden flight demo of the FMS PITTS V2. All new glueless ALL screw together design assembles in minutes and flys fantastic!

Model available at:

Also available at:

FMS PITTS V2 1400MM Maiden Windy Flight (18 min 23 sec)

Posted by jetpilotrich | Today @ 10:40 AM | 91 Views
Time to light 'em up with the New 70mm FMS V3 AVANTI Pocket Rocket! The best just got better with an all new fan, Motor, ESC, landing gear, wing connectors, & lights! Smoke 'em if you got 'em --- at:

FMS AVANTI V3 Windy Day Flight Demo By: RCINFORMER (10 min 4 sec)

Posted by lee taylor | Today @ 08:10 AM | 200 Views
A little bit of sim flying just for the fun of it

Short flight (1 min 38 sec)

Posted by _AL_ | Today @ 06:20 AM | 353 Views
Daz flying my 70% Veron impala on Phil Green reeds emulation TX.

Daz impala (1 min 8 sec)

Posted by Tazkiller85 | Today @ 06:04 AM | 373 Views
Yep Les Amis,
Le roi des marécages ! J'ai en test aujourd'hui mon premier Hydroglisseur, le GARTT. Comme c'est un kit à monter, j'ai décider de vous faire un petit tuto complet. Non seulement ça aidera ceux qui voudrait le commander mais ça me permet en plus de vous donner quelques astuces et info sur plusieurs étapes comme la soudure, le bind, les parametrage d'ESC etc ... Une très bonne surprise niveau qualité des matériaux et conception . Prochaine vidéo sur cet engin, montage FPV et test sur l'eau bien sur ...
Bon Film à Tous et Merci de votre soutien .

GARTT Hydroglisseur Kit _ Review Montage Set-Up _ Tuto au Tazatelier (36 min 49 sec)

NOTATAZ : 17/20 ...

Niveau : Bricoleurs / Amateurs

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- GARTT Hydroglisseur Kit :
- Pièces détachées Gartt (Ali ) :
- Fer à souder ts100 (Promo) :

S'il vous manque du matériel, retrouver quelques liens tout en bas de mon : TABLEAU DES PROMOS ET COUPONS 2020 (remis à jour régulièrement, pour aider la chaîne, gardez ce lien en favori ou raccourci pour vos achats sur Banggood ) :

- Si Vous voulez aider la chaîne avec un don (tous les dons servent à alimenter les vidéos en produits ou matériel ):

- Frame Mr...Continue Reading
Posted by Tazkiller85 | Today @ 06:03 AM | 377 Views
Yep Les Amis,
Drone 3 en 1, Concours 3 en 1 ! Voici donc, comme promis, le dernier "Joujou" de la série enfants ... Ce petit pack L6082 est très complet et ludique. Ne vous attendez pas à des performances de "ouf" mais tous les accessoires fonctionnent parfaitement et vous permettront de pouvoir tester plusieurs style de pilotage. Bonne nouvelle, en cas de casse (bandes de brutes ! lol ), toutes les pièces détachées sont disponibles et pas chères. Pour résumer, voici donc un petit pack bien complet et fonctionnel à moins de 25€, le cadeau idéal pour les pilotes en herbe ... Bon Film à tous et bon vol

L6082 Drone 3 en 1 - Review Test Démo - Vidéo 3 en 1, 1 concours, 3 gagnants ! (23 min 15 sec)

NOTATAZ : 17.5/20 On en a pour son argent ...

Niveau : Débutants et enfants

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :
- L6082 3 en 1 :
- Moto volante :

- L6082 3 en 1 ( Drone et accessoires ):
- Drone interactif E111 :
- EV300D ( BG333D ):
- MAJ EV300D :
- Cable OTG pour MAJ EV300D :

- Ma page sur Banggood :
- Ventes Flash :

- TABLEAU DES PROMOS ET COUPONS BANGGOOD 2020 (remis à jour régulièrement, pour...Continue Reading
Posted by steve wenban | Today @ 04:56 AM | 430 Views
In 1987 I built this Avro Anson for the F4C world champs ,at the time I was really into the power competitions era. I thought at that time this was the top end of my building endeavours ,I since learnt it was simply the next step to build more scale models .
Posted by Nancy yang | Today @ 03:57 AM | 479 Views
this our company hot-sale product ,welcome to consulting , our website
Posted by JeffMac | Yesterday @ 10:47 PM | 927 Views
All -

A long time friend had this Skychief and was obtained from him. The engine was in good shape except the crankshaft threads were destroyed and many original parts were missing. A parts Skychief was obtained from an RC groups fellow member and that engine provided the original needle valve / fuel tank assembly , crankshaft , spark ignition timer. The refurbished Skychief pleases me. The crankcase is very light zinc or such pot metal ??? the cylinder is very heavy cast iron. The piston has one ring of about 1/8" width. The piston was soaked for a week in ATF to help loosen the stuck piston ring on my Skychief.

Best regards,

Posted by Tamiya tony | Yesterday @ 09:05 PM | 1,056 Views
Custom decals
Posted by bill_delong | Yesterday @ 07:55 PM | 1,211 Views

I am creating this thread because I recently learned that URC has officially retired and all my "Build Project" threads on URC are long gone and will never come back

I will do my best recreate what I remember from my thread on URC and share this information here on RCG.

"PROJECT 21" was the very first 1/8 4WD SCT conversion made by Tim Martin and TheJANG at URC in late 2009, here are the original videos created:

Project 21 - Original 1:8th 4WD brushless RC short course truck (2 min 41 sec)

Project 21 - 1/8th nitro buggy to electric short course conversion - Video 2 (1 min 21 sec)
...Continue Reading
Posted by GroundControlRC | Yesterday @ 05:11 PM | 1,467 Views

Test Flight - King Kong / LDARC Tiny Wing 450 - Testing It's Slow Flight Capability

Here is a link to the Video:

I always immediately test how fast an aircraft will fly, however, slow flight capability is very important as well.
My favorite aircraft are those that are aerobatic and have a wide flight envelope.
Let's see how slowly this one will fly ;-)

Banggood GCRC

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #TinyWing450 #KingKong #LDARC #MicroWing

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Here is a link to this Cool Micro Wing:

KINGKONG / LDARC TINY WING 450mm Wingspan EPP FPV PNP With Flight Control

Here are links to Micro SBUS Receivers:

2.4G SP09X Micro DSM2/DSMX 3.3V-5V Satellite Receiver

Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH

2.4G 8CH Mini Receiver PPM SBUS Output for Frsky X9D(PLUS) XJT DJT DFT DHT

Here are links to some LIPOs that should work as I could not find the LIPO I used:
(Note: This is based on the stated Spec/Dimensions/Weight of the LIPOs, I do not have these so I cannot...Continue Reading
Posted by Cox PT-19 | Yesterday @ 03:47 PM | 1,564 Views
Back in the 1980's (or maybe 90''s all starting to meld), my flying bud Neal and I got a couple of the newly released Cox R/C PT-19's. Made of molded foam, these are good-looking planes, with moderate performance from it's .049 Ranger (coincidentally, also the name of the full scale PT's engine).

We DID experience problems with getting the CG correct...even moving all the gear as far forward as we could, the model was still a bit tail-heavy, and would snap inverted if it's pilot got too frisky with pitch input. A chunk of lead ballast fixed the problem, but gave the .049 still more weight to drag through the sky.

I finally decided to "make the ballast work", and bolted a Medallion RC .09 to it's snout, spaced forward by a block of ply, and fed by a metal wedge tank suspended behind the firewall. The .09 was the exhaust band type, and worked really well...helping with the balance problem, AND turning the PT into a mean little ankle biter.

Neal followed suit...though his may have been powered by an O.S. .10, and we put on many impromptu Sunday pylon races, or dog fights (it was often difficult to tell the difference), with both planes amazingly surviving our crazy flying.

I'd like to get my old relic going for this year's S.M.A.L.L., again with it's .09 engine. The foam has survived in great shape, but the harder plastic parts are turning into cookie crumbs and will take some shoring up to be airworthy.
Posted by phil alvirez | Yesterday @ 02:57 PM | 1,613 Views
once i was enjoying a perfect day, no clouds, just catching flies, when noticed a monarch butterfly doing its typical wandering flying, at about 30 feet, when suddenly she began to circle and stopped flapping its wings...and began to climb fast. she had got a surface thermal, the kind of rising warm air, and in no time disappeared. i couldnt believe my eyes. no idea that they know how to make use of those currents.
then began searching and found some data that sounds like sci-fi at its wildest. just look:
then, as if that is not enough, i learned about other that go even further:
and we are superior species?
Posted by UpNup | Yesterday @ 02:41 PM | 1,610 Views
Front part of fuselage went together just as the photo plans show. The plans consist of photos and part numbers.

Several have told me that the problem is with the weak tail boom, weak controls on linkages, and being tail heavy. Trying to rethink that part.
Posted by unboxingexp | Yesterday @ 12:04 PM | 1,799 Views
This 2-in-1 flying RC motorcycle allows side and diagonal drifts on the floor and then to takeoff. Forward and backward flips & rolls offers multiple ways for you to play. Two Takeoff Modes: Vertical Takeoff/Drive to Takeoff.
Eachine E021 flying motorcycle (2 min 26 sec)

Posted by scousethief | Yesterday @ 10:35 AM | 1,939 Views

21 GRAMS !!!! Thats ridiculous lol

21g Eachine UZ65 65mm 1S Whoop FPV Racing Drone BNF Runcam Nano3 35mm Propeller 5.8G 25~100mW VTX

Brand Name: Eachine
Item Name: UZ65 65mm FPV Racing Drone
Wheelbase: 65mm
Size: 80mm*80mm*40mm
Weight(without battery): 21g
Weight(with battery): 29g
Receiver option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
External DSM2/DSMX Receiver version(Compatible with Spektrum DX6I/DX7/DX8/DX9)
External TBS Crossfire Nano RX version(Compatible with TBS transmitter)

The smallest 1-2s 3 in 1 flight controller built-in ESC, Receiver
The world first 65mm whoop with 35mm propellers
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV
Camera Angle adjustable

Spare parts specifications:

Mode: SE0802 19000KV
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
No.of Cells(Lipo):1S only

HQPROP 35mm-3blades
Center Thickness:5mm
Prop Diameter:35mm
Center Hole Inner diameter:1.0mm

Flight controller
Frsky SPI RX version Firmware target: CrazybeeF4FR
Flysky SPI RX version Firmware target: CrazybeeF4FS
DSM2/DSMX External RX version Firmware target:CrazybeeF4DX
TBS...Continue Reading