Comments (0)
Add Comment
-
Views: 415
Scenic overlook at Percy Warner Park here in Nashville. My ride is a Carino 150 Le from www.gsmotorworks.com -
Views: 319
Another shot of the overlook -
Views: 286
A view from the overlook into the valley -
Views: 319
The tail end of my Carino 150 Le -
Views: 293
This is a shot of the Percy Warner Steeplechase, world renound for it's premier horse racing each September -
Views: 292
Another shot of the Steeplechase -
Views: 293
Yes, it's a snake! -
Views: 303
A snake out in late November? Yes and he was about 5' long!
-
Views: 617
Carino 150 LE from www.gsmotorworks.com Shipped to my door for $1100.00 buck! -
Views: 345
She's not as small as you'd think, weighing in at 330 pounds she's a BBW! -
Views: 330
Helmet storage box, I ordered it with the scooter, price, $39.00! -
Views: 364
She may not be Italian but she's got and Italian Medalion I added, now she qualifies for being 1% Italian, 99% Chinese! lol -
Views: 342
Low miles, but not for long! -
Views: 352
A beautiful day for a picture. -
Views: 329
-
Views: 321
Front view, nice chrome accents!
-
Views: 688
Aluminum mast comes in two pieces for easy transport and storage. Keel comes off easily by unscrewing the wing nut located on the deck. Mylar sails and GRF deck and hull make building easy and quick. -
Views: 519
Detail of fore deck shows access hatch on right hand side. -
Views: 495
Interior shows Hitec servos and battery pack -
Views: 531
Hull comes in a beautiful blue color so no painting is required or needed. Plastic and aluminum boatstand comes apart for storage or transport. -
Views: 537
Hatch removed, uses a top cover hatch with Oring to keep out water. Mine was loose and required using waterproof tape to make a tight fit. -
Views: 516
Rear of deck shows nice decals and helm wheels for added scale.
-
Views: 907
XPG on take-off roll, with pre-rotor take-offs are short, about 5-10 feet. -
Views: 625
XPG Take-off, she climbs steeply with lots of power! -
Views: 569
Flyover, about 50 feet, the wind was 5-10 with and occasional gust to 20 Mph. The XPG Autogyro handles the wind well. -
Views: 529
Side view, the XPG Autogyro flies at this attitude most of the time, nose up.
Sticky:
Here's the rest of the story!
-
Views: 705
Eagle soars high above -
Views: 617
EPP Eagle ready for flight, checking flight controls prior to launch -
Views: 608
Close fly-by -
Views: 582
A look at the underside, at altitude it can easily pass for a real bird -
Views: 617
Size ref photo, it's virtually lifesize and only weighs about 17 oz. ready to fly -
Views: 538
This is the XPG Autogyro offered by Dan Schwartz of www.foamfly.com It is the first augogyro I've built and I've not yet flown it. -
Views: 517
It's powered by a brushless out-runner motor in the 125 watt class, using a 3-cell 1300 mAh Lipo pack. -
Views: 528
It uses 3-HS-55 Hitec servos, a Jeti 18 Amp brushless controller
-
Views: 785
Eco 8 Royal -
Views: 581
Side view, Eco 8 Royal -
Views: 686
Size comparison, Falcon 3D next to Eco 8 Royal, the Falcon is Trex SE size. -
Views: 754
View with the hood raised to see the electronics. -
Views: 695
Close up of motor and main gear, no, the wires are not touching the main gear, nor is the servo wires! -
Views: 732
Another shot of frame and electronics.
-
Views: 2707
New E-Sky E-Smart 600 Class 50-size electric helicopter. -
Views: 1148
Low pass of the E-Smart. -
Views: 1462
Canopy of the new Dragnous II, I really like the looks of this mini helicopter. -
Views: 1293
E-Smart flying off into the wild blue yonder. -
Views: 2058
Landing the E-Smart -
Views: 2316
Low hover, E-Smart -
Views: 13972
New Belt CP E-Sky's newest addition to their mini fleet, it's a very nice helicopter. -
Views: 6297
The E-Sky Belt CP metal and carbon edition is simply beautiful to look at and a marvel of modern CNC work.
-
Views: 6794
Falcon 3D, nice speed 400 Class Mini helicopter soon to be available at Hobby-Lobby. -
Views: 1571
Head hold gyro and battery, the gyro holds and works great! -
Views: 1605
Head on view, Falcon 3D! -
Views: 2384
Converted Stanley toolbox, holds the Falcon perfectly, total cost for toolbox, $24.95 from Lowes. -
Views: 1352
Falcon 3D drive gears, they work great! -
Views: 2631
Closed Stanley toolbox, holding the Falcon. -
Views: 1418
Falcon 3D resting on it's nest.