rcheli168's blog View Details
Posted by rcheli168 | Jun 19, 2019 @ 04:32 AM | 1,869 Views
Emax Tinyhawk Indoor FPV Racing Drone RTF F4 4in1 3A 15000KV 37CH 25mW 600TVL VTX 1S

- 75mm Indoor racing drone
- 08025 brushless motor with durable ball bearing for increase flight and low maintenance
- Durable polypropylene plastic frame with propeller guards
- Motor beeper function. Find your tinyhawk after a crash
- Speeds up to 56kph
- Up to 4 minutes flight time on single battery
- Fast F4 Processor for smooth stable flight characteristics
- MPU6000 gyro for vibration free operations
- Unique inverted motor design to keep CG as low as possible to fit in the smallest of spaces
- 25mw VTX and 600tvl Camera included for fun FPV flight via FPV style goggles
- Smart Audio function to change VTX channel via your transmitter
- OSD settings control to customize flight feel
- Pre-tuned from factory with expert pilots and new pilots in mind. 3 rate profile settings for all types of flying feel
- Plug in type motors for easy maintenance
- 1s High Voltage (HV) 450mah lipo included
- Frsky compatible D8 receiver built in to FC
- Custom carbon fiber themed carrying case

Recommend parts (Not Included):
Frame kit: Click 75mm Polypropylene Frame Kit
Motor: Click Tinyhawk 08025 Brushless Motor 15000KV
Propeller: Click Tinyhawk Avan Propeller
Battery: Click Tinyhawk 1S 80C/160C HV 450mah Lipo Battery
LED LED Strip Light : Click 1M 2.5mm LED Non-Waterproof 60 LED Strip Light

Product Details
Model: Tinyhawk BNFversion
1 diagonal wheelbase (...Continue Reading
Posted by rcheli168 | Jun 12, 2019 @ 04:38 AM | 833 Views
SKYRC GSM-015 GNSS GPS Speed Mete High Precision GPS Speed Meter
Features1.Measure Top Speed, Average Speed, and Top Altitude;
2.Concurrent reception of GPS & GLONASS;
3.GNSS Coordinator;
4.Update frequency up to 10Hz;
5.Built-in 1M flash (recording time: 2 hours);
6.UTC timestamp logged for each track point;
7.Built-in rechargeable, LiPo battery 200mAh (Operating time: 150
8.Switch between Metric and Imperial system of Measurement;
9.GNSS LOGGER software for device management and data logging
on Bing Maps;
10.Firmware upgradeable.
Product DetailsConcurrent reception of GPS & GLONASS
Receiver: L1, 1575.42 MHZ
Update frequency: 10 Hz.
Antenna type: Built-in
Satellite signal reception sensitivity: -167dBm
Dimensions: 65.7X39.6X20.8mm
Weight: 45g

Operating temperature: 0℃ to 40℃
Storage temperature: -10℃ to 70℃
Operating humidety: 5% to 90%
Item Packing SKYRC GSM-015 GNSS Speed Meter x 1
Posted by rcheli168 | Jun 10, 2019 @ 04:22 AM | 885 Views
2019 Aomway HD588 V2 10 Inch 5.8G 64CH Diversity FPV HD Monitor 1920 x1200 with DVR Build in Battery For RC drone


Aomway HD588 V2 10 Inch 5.8G 64CH Diversity FPV HD Monitor 1920 x1200 with DVR Build in Battery For RC drone
Product Details
Brand Name: Aomway
Item Name: HD588 Monitor
Frequency: 5.8G 64CH
NTSC/PAL auto selection
Display: 1920 x1200p full HD
FOV: horizontal 85°/85°(Left/Right),vertical 85°/85°(Up/Down)
DVR Resolution: 1280*720P
Recording: auto save
Latency : 90ms
LED backlight
Sensitivity: 95dBm
Brightness: 450cd/m2
Auto brightness:yes
RF receiver switch:OFF/ON/L/R
Spectrum analysis:Yes
Contrast: 1000 CR
image rotation:360°
Power consumption ≤ 9W.
Wide Voltage : 8~28V
Input Voltage: 12V 2A
Charger: 15V 2A
Build in Battery: 2400mah Li-ion battery
Working Time: about 100mins
Dimensions: 246 x 172 x 20mm.
Operating Language: 8 different languages
USB for multimedia displayer and firmware upgrade.
Standard 3.5mm AV in /AV out port.
Standard 5.5*2.1mm DC in and DC out port.
Support 1080p HDMI in display.
Support Max. 64G TF card.
OSD menu: Voltage, Channel, RSSI, Battery Status.
Item Packing
Monitor x 1
Antenna x 2
Charger x 1
AV Cable x 2
User Manual x 1
Posted by rcheli168 | Jun 05, 2019 @ 11:03 PM | 791 Views
FrSky Taranis X-Lite Pro 2.4GHz 24CH Radio Transmitter Longer Telemetry Range for RC Drone FPV Racing Multi Rotor


With the growing acclaim of the new compact X-Lite form factor, FrSky is introducing this upgraded version. The Pro and S versions combine all the benefits of the preceding design with the features of our full-sized radios, along with the newly developed ACCESS (Advanced Communication Control, Elevated Spread Spectrum) protocol.

New for the PRO version is a high-quality, all-metal CNC hall sensor gimbal. Checking the airwaves for RF noise is now possible with the new power meter and spectrum analysis function added to the OpenTX firmware. Pro version feature the addition of an improved wireless trainer function which makes them compatible with the FrSky Free Link App. The best thing about the Pro model is that pilots can now expect even lower latency and enhanced performance due to our new ACCESS transmission protocol. With the integrated 6-axis sensor unit, pilots can use the radio as a motion-sensing controller to control the inputs of a model during flight or use it to point a camera in the desired direction. Like all of our transmitters, all of the beloved features from previous Taranis are included such as full haptic feedback and voice alerts, as well as telemetry and 24 channels and an additional 2 momentary buttons are installed.

Product Details
Brand name: FrSky
Item name: X-Lite Pro Radio Transmitter
Number of channels: 24 channels
Weight: 308g / 376g (with battery)
Operating voltage range: 6.0 ~ 8.4V
Operating current: [email protected]
Operating Temperature: -20°C ~ 60°C (-4°F ~ 140°F)
Backlit LCD resolution: 128*64
Model memories: 60 models (expandable by micro TF card)
Micro USB interface: supports 2S Li-battery balancing charge
Item Packing
X-Lite Pro Radio Transmitter x 1
Posted by rcheli168 | Dec 20, 2018 @ 10:59 PM | 2,024 Views
FrSky Air Speed Sensor- ASS-100 High Precision for FrSky Smart Port enabled syste
FrSky Smart Port Air Speed Sensor ASS-100 is designed for FrSky Smart Port enabled system, and can provide Airspeed Data for your entire flight.
Product Details
FrSky Air Speed Sensor- ASS-100 High Precision

Compatibility FrSky Smart Port enabled receivers, such as X8R, X6R, X4R, etc.

Model ASS-100

Circuit Board: Weight 5 g, dimensions 33.14×17.14×10.45mm

Pitot Tube: Weight 4 g, length 101mm, diameter 2.6 mm

Pitot Tube Hose: Silicon, clear, 3 feet (1 meter), 2.2mm ID, 3.8mm OD

Operating Voltage Range DC 4 -10 V

Operating Current [email protected]

Measurement Range 0~360km/h (0~223.7mile/h )

Item Packing
FrSky Air Speed Sensor- ASS-100 High Precision x 1

Posted by rcheli168 | Aug 20, 2018 @ 02:18 AM | 3,904 Views
72-channel u-blox M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C
On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking
Features an additional front-end LNA for optimized performance and a front-end SAW filter for increased jamming immunity
Build-in embedded GNSS patch antenna, low power consumption
The 15 x 15 mm patch antenna provides the best compromise between the performance of a Right Hand Circular Polarized (RHCP) antenna and a small size to be integrated in any design.
Magnetic sensor QMC5883L integrated

Product Details
Max navigation update rate
Single GNSS up to 18 Hz
2 Concurrent GNSS(GPS & GLONASS) up to 10 Hz
Horizontal position accuracy(GPS & GLONASS) 2.5 m CEP
Velocity accuracy 0.05m/s
Cold start 26 s
Aided cold starts: 2 s
Hot start 1 s
Tracking & Navigation: –165 dBm
Reacquisition: –158 dBm
Cold start: –146 dBm
Hot start: –155 dBm
Input voltage range: 4~6V
Uart (Tx,Rx) interface for GPS SAM-M8Q
I2C (DA,CL) interface for Compass QMC5883L
Battery for HOT module start
Power LED(Red) & Time pulse LED(Blue)
Dimensions: L20 x W20 x H10 mm
Weight: 7 gram
Supported by INAV/Betaflight/Ardupilot, ect.

GPS, GLONASS, SBAS, QZSS are enabled by default
Blue PPS LED blinking(1Hz) means 3D fixed
update rate 1Hz & baudrate 9600 default
Baud 9600~115200 supported by INAV/BF/Ardupilot
update rate 5Hz with INAV UBLOX Protocol
update rate 10Hz with INAV UBLOX7 Protocol
Compass Alignment(Arrow forward):
INAV/BF: CW 270° Flip
Ardupilot/Mission Planner: Rotation None
BF doesn’t support GPS position hold and RTH, GPS Rescue mode is supported by BF3.5 or last.
No need compass for Fixed wings with INAV firmware
The scratches on ceramic antenna are the result of tuning the antenna by ublox.

Item Packing
M8Q-5883 module x 1
SH1.0-6P 20cm silicon wire x 1
Transparent PVC Heat-shrink tube x 1

Posted by rcheli168 | Mar 06, 2018 @ 05:11 AM | 2,763 Views
Amass XT30U Connector Male Female Gold Plated Banana Plug


Amass XT30U Connector Male Female Gold Plated Banana Plug

Product Details

use 2mm gold-plated banana plugs,
In a small volume with the craftsmanship and fine materials,
Best wire can be adapted for 16awg, 20awg silicone wire.

Item Packing

1 x Amass XT30U male connector
1 x Amass XT30U female connector
Posted by rcheli168 | Jan 09, 2018 @ 08:28 PM | 3,390 Views
Trainer90 0703 1S Micro Brushless FPV Quadcopter Flysky PNP Kit
- Extremely light and more powerful
- STM32 F303MCU + BLHELI_S ESC make your Operating feel more stability and silky
- Jaw-dropping flight performance
- Betaflight support
- Acro mode/Air mode/Angle mode support
- Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)
- OSD Configuration has been include in BETAFLIGHT GUI
- Radio Stick to control PID Tunes
- BLEHELI_S pass-through ready

Product Details
Flight controller: Fusion X3 F3 Flight controller built-in OSD and 4IN1 5A ESC
- Motor: Happymodel 0703 KV15000 brushless motor
- Propeller: 56mm 2-blades propeller
- Camera: 600TVL HD CMOS 1/4inch
- VTX: 5.8g 25MW 48CH Video transmitter
- Battery: 3.8v 250mah
- OSD: Betaflight OSD
- Firmware of Flight controller: Betaflight 3.2
- Flight time: 3minutes
- Buzzer Ready

Receiver: Flysky FS82 8ch AFHDS2A receiver Ibus output with Failsafe

Item Packing
Trainer90 0703 version
Spare parts Quantity Remarks
Trainer90 Frame 1
VTX &Camera Fixed mount holder 1 3D printing , provide Design document
0703 KV15000 Brushless motor 4
Fusion X3 flight controller 1 Integrated OSD and 4in1ESC
600TVL Camera+25MW VTX 1
56mm propellers(4pcs/set) 2 sets
Flysky compatible FS82 receiver 1 AFHDS-2A IBUS With failsafe
3.8V 250MAH 30C HV LIPO battery 1
1S LIHV charger 1
Buzzer 1
Weit:25g without battery; 31g with battery
Posted by rcheli168 | Jan 02, 2018 @ 05:14 AM | 8,654 Views
Matek F405-STD STM32F405 F405 with OSD Flight Control Board DShot outputs For RC Multicopter


Matek F405-STD STM32F405 F405 with OSD Flight Control Board DShot outputs For RC Multicopter

Product Details

MCU: 168MHz STM32F405RGT6
IMU: 32K ICM20602 gyro/accelerometer (SPI)
Baro: BMP280 (I2C)
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
Built in inverter for SBUS input (UART2-RX)
SoftSerial on TX2, S5 or S6 optional
Camera control on S6 or DAC optional
Smartaudio & Tramp VTX protocol supported
Battery Voltage Sensor: 1:10
Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
LDO 3.3V: Max.300mA
I2C1 SDA & SCL: Yes
WS2812 Led Strip : Yes
Beeper : Yes
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
6x PWM / DShot outputs without conflict
2x 2812LED outputs option
5x UARTs
1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x pair I2C1 pads
1x Side-press button for BOOT(DFU) mode
1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection
36x36mm PCB with 30.5mm mounting hole

Item Packing

1 x F405-STD flight control board
2 x 0.5mm*16Pin 5cm Flexible Flat Cable
4 x M3 Anti-vibration Standoffs
Posted by rcheli168 | Jun 12, 2017 @ 04:38 AM | 7,268 Views
RunCam Split 3 WiFi Module Camera for fpv racing
Details: http://www.lxrcmodel.com/details.asp...=3029&classId=


RunCam Split 3 WiFi Module

Product Details

FOV Angle of Field FPV FOV 130° / Recording FOV 165°
Video Resolution [email protected] / [email protected] / [email protected]
Video Files MOV
Image Resolution 2 Megapixels
TV Output NTSC / PAL Switchable
Real-Time Audio Output Yes
Interface Micro USB / UART
Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II)
WiFi Module Support (Removable)
Dimensions PCB 36*38mm / Lens Module 22*20mm
Power Input DC 5V
Working Current 650 mAh
Weight 21g

Item Packing

1XRunCam Split3
1XWiFi Module
Posted by rcheli168 | May 27, 2017 @ 02:16 AM | 4,764 Views

DJI Spark Drone 2KM FPV with 12MP 2-Axis Mechanical Gimbal Camera QuickShot Gesture Mode Quadcopter

Product Details


Max Ascent Speed 9.8 ft/s (3 m/s) in Sport Mode without wind
Max Descent Speed 9.8 ft/s (3 m/s) in Auto Landing Mode
Max Speed 31 mph (50 kph) in Sport Mode without wind
Max Service Ceiling Above Sea Level 13,123 feet (4,000 m)
Max Flight Time 16 minutes (no wind at a consistent 12.4 mph (20 kph))
Max Hovering Time 15 minutes (no wind)
Operating Temperature Range 32° to 104° F (0° to 40° C)
Satellite Positioning Systems GPS/GLONASS
Hover Accuracy Range Vertical:
+/- 0.1 m (when Vision Positioning is active) or +/-0.5 m
+/- 0.3 m (when Vision Positioning is active) or +/-1.5 m
Transmitter Power (EIRP) 2.4 GHz
FCC: 25 dBm; CE: 18 dBm; SRRC: 18 dBm
5.8 GHz
FCC: 27 dBm; CE: 14 dBm; SRRC: 27 dBm
Operating Frequency 2.400 - 2.483 GHz; 5.725 - 5.825 GHz
Takeoff Weight 300 g
Dimensions 143×143×55 mm
Diagonal Distance (propellers excluded) 170 mm

Obstacle Sensing Range 1-16 ft (0.2 - 5 m)
Operating Environment Surface should be larger than 20x20 cm and enable diffuse reflection, with reflection rate >20% (eg. wall, tree, people)

Sensor 1/2.3" CMOS
Effective pixels: 12 MP
Lens FOV 81.9° 25 mm (35 mm format equivalent) f/2.6
(shooting range: 2 m to ∞)
ISO Range Video: 100-3200
Photo: 100-1600
Electronic Shutter Speed 2-1/8000 s
Image Size 3968×...Continue Reading
Posted by rcheli168 | May 06, 2017 @ 04:15 AM | 6,515 Views
OMNIBUS F4 V2 Pro Flight Controller With Built In OSD


OMNIBUS F4 is characterized by flight controller and OSD program integrated in an MCU, no additional microcontroller controlled, while the OSD tuning software and flight control parameters are integrated together, the input and output using standard equipment interface, reducing the conversion of wire and connectors , Reduce the risk, improve assembly and maintenance convenience.
MPU6000 sensor is connected with and SPI bus to improve the sampling rate of the sensor and the MCU master program running frequency, to provide higher control accuracy and faster response speed.
Built-in power module BEC, no external, easy to use.

Product Details

Item name: F4 V2 Flight Controller
Size: 35x35mm
Mounting hole: 30.5x30.5mm
Firmware: betaflight_3.1.5_OMNIBUSF4SD
Input voltage: 2-6S
Sensor: SPI Sensor MPU6000
Berometer: BMP280
Slot: standard SD card slot
BEC: 5V/3A

Item Packing

1 x F4 V2 Flight Controller (without cables)
Posted by rcheli168 | Dec 05, 2016 @ 10:19 PM | 5,227 Views
Fatshark Fat Shark Dominator HD3 HD V3 4:3 FPV Goggles Video Glasses Headset with HDMI DVR


FATSHARK HD3Modular 3D FPV Headset is back in top form with subtle improvements to ensure its continued dominance as the world’s premier FPV goggle.
Digital pilots will appreciate the new 16:9 display format when in HDMI mode to match the display aspect ratio of HD systems.
The HD3 is the most powerful, versatile and portable FPV goggle and the top choice of drone pilots.

Product Details

Brand Name: Fatshark
Item Name: Dominator HD V3
FOV 42°Diagonal
59-69mm IPD Range (adjustable)
SVGA 800 X 600 Display
Support Side/Side 3D
NTSC/PAL Auto Selecting
High definition media interface720p Support
Modular Head Tracker Bay
Modular Receiver Bay
DCin: 7-13V (2S/3S)
Power Consumption: 4W
Integrated Analog DVR (does not supportHD recording)

Recommanded Part(not included):
5.8GHz Fat Shark with Raceband, 1G3 Fat Shark, 2.4GHz Fat Shark
Optional diopter lens inserts: -2, -4, -6 dpt sold separately
Trinity 3 axis head tracker module
43 channel RF Module support over 6 bands (1.3, 2.4, 5.8 Ghz)

Item Packing

1 x DominatorHD3 Headset with fan-equipped faceplate
1 x Zipper Case
1 x 7.4V 1800mAh Battery with LED Indicator
1 x AV Cable
1 x Mini to Mini high definition media interface cable
(include Mini to Micro, Mini to Standard high definition media interface adapters)
New Product / Posted by rcheli168 / Nov 14, 2016 @ 10:09 PM / 5,008 Views / 0 Comments / Reply
This entry is temporarily hidden while rcheli168 edits it.
Posted by rcheli168 | Nov 09, 2016 @ 10:36 PM | 5,496 Views
SYMA X5UW 720P WIFI FPV With 2MP HD Camera 2.4G 4CH 6Axis RC Quadcopter RTF from lxrcmodel


This Syma X5UW Wifi PFV drone is equipped with 2.4G 4CH transmitter and 6-Axis gyro for your easy and stable control, 720P HD camera and WIFI real-time images transmission system for fantastic video/picture taking, which is really a great flight combination. Moreover, it is fantastic with functions of high/low speed switch mode, flip mode, headless mode, and one key take off/landing. Just come and get it!

Brand name: Syma
Channels: 4 Channels
Remote control frequency: 2.4GHz
Gyroscope: Six axis
Camera: 720P
FPV transmission: Wifi real-time
Battery power: 3.7V 500mAh li-po battery
Charging time: About 90mins
Working time: About 8mins
Control distance: About 50 meters
Transmitter battery: 4 * AA batteries (not included)
Item dimensions: 320 * 320 * 70mm / 12.6 * 12.6 * 2.7in
Item weight: 112g (including battery)

Product Details
1, FLIGHT PLAN ROUTE: Planned flight track is available for this drone, you just need to download the Syma App to your smart phone, and the drone will fly the rounte as you planned on the App.
2, ALTITUDE HOLD MODE: Thanks to the Built-in AIR PRESSURE SENSOR: Make sure the throttle stick at the middle position, when you push the throttle stick and then release, the rc drone will automatically set the height. Thus you can fly the drone easily and steadily....Continue Reading
Posted by rcheli168 | Nov 01, 2016 @ 05:04 AM | 5,157 Views
NEW Emax RS2205S 2300KV Racing Edition Brushess Motor CW for FPV Racing


Lighter and Lower Profile:
2 grams lighter than the first version of the RS2205, the RS2205-S is a 2205 motor which has been overhauled for the weight conscious racer. The bell has been redesigned to have a lower profile without sacrificing the structural integrity of the motor. This eliminates unnecessary mass and allows quicker rotational response of the bell. The shorter motor height allows a lower center of gravity closer to the mounting point.

RS2205-S cooling fins have been reworked to keep the motor height and weight low while maintaining functionality.

N52SH Curved Magnets:
By utilizing N52SH curved magnets, the pulling force between the stator and magnet is greatly increased. The design of the motor extracts every bit of force from these magnets and keeps it constant throughout the phases.

Genuine Japanese NMB bearings ensure smooth, long-lasting performance.

Compared to the RS2205, the new RS225-S cranks out another +100g of thrust. Paired with a KingKong 6x4 propeller, expect over 1,400 grams of thrust

Hollowed Steel Prop shaft and main shaft:
The upgraded shafts maximize durability. No worry of damaging threads during crashes.

Bell Retaining Screw:
No more E-Clips. With a retaining screw, RS2205-S has no chance of having bells pop out during a race. It is also easy to service the motor without needing a special tool.

EMAX Legendary Production Quality:

Engineered and produced In-House with state-of-the-art production techniques and machines, every motor that comes out of our factory is guaranteed to have the tightest build tolerances. It is with this ability, that we can achieve 0.10mm magnet to stator air-gap and crash-durability racers come to love.

Product Details
Brand name: Emax
Item model: RS2205-2300KV-S CW
KV: 2300 /
Framework: 12N14P
No. of Cells: 3 - 4S
Length: 30.5mm
Diameter: 27.9mm
Max Thrust: 1180g
Shaft: M5
Propeller: 5 inches
Weight: 28.6g
Item Packing
-RS2205-2300KV-S CW X 1
Posted by rcheli168 | Oct 25, 2016 @ 07:58 PM | 5,149 Views
DYS Fire 2206 2100KV 2300KV 2600KV FPV Racing Motor

Japanese ISC bearing
0.1mm laminations
N54 magnets
M5 hollow shaft
Powerful and high efficiency, this is the new DYS FIRE FPV racing motor. It is the new stage of motor with 0.1mm laminations, Japanese ISC bearing and N54 magnets. More powerful for FPV racing and freedom flight. High efficiency for your race. Around 32g light weight with motor wire and M5 hollow shaft, 3-4s lipo support.

The motor is available in three different KV ratings: 2100kv, 2300kv and 2600kv. Price for single motor.

Product Details
Configu ration..........NP
Stator Diameter.........22.0mm
Stator Length............6.0mm
Shaft Diameter..........3.0mm
Motor Dimensions(Dia.*Len)............Φ27.7x17.7mm
Weight (g).......32g
No.of Cells(Lipo)..3-6S
Max Continuous current(A).............27.8A
Max Continuous Power(W)...............444.8W
Internal resistance................0.07Ω

Item Packing
DYS Fire 2206 2100KV FPV Racing Motor x 1
Posted by rcheli168 | Oct 22, 2016 @ 03:56 AM | 6,003 Views
RCEXL Mini Smoke Pump Gasoline Pump Smoking Pump Adjustable Flow

Wholesale USD26.76
- Adopting the all new diaphragm pump. By calculating & testing, the smoke/gasoline ratio is controlled in a reasonable range for sufficient atomization, and airplane won't be polluted.
- Adopting low power motor, the smoke pump can be directly powered by receiver. No need of extra batteries. The pump weights only 68g.
- Directly driven mode, no need of complicated program settings, just need 1 channel for controlling.
Product Details
- Voltage: 4.8-8.4V
- Pump Style: Membrane
- Weight: about 68g
- Dimensions(L*W*H): 56*22.5*35.5mm
Barb Connection: 3mm
Item Packing
1X RCEXL Mini Smoke Pump