steevie's blog View Details
Posted by steevie | Yesterday @ 01:58 AM | 10,123 Views
Hello everyone,

Here is a preview of my videos from July 2021.

2021-07-21 Nemo aircraft - Tiltrotor RC model. (5 min 28 sec)

BAE Hawk EDF 80mm FMS RC model (2 min 58 sec)
...Continue Reading
Posted by steevie | Jan 01, 2021 @ 02:31 PM | 11,309 Views
Good morning all,

Some excerpts from the beautiful flying moments of the year 2020 in the video below. The images were taken in Vicques in Switzerland.

Extrait de la saison de vol AMJD 2020 (3 min 40 sec)

Posted by steevie | Sep 13, 2020 @ 06:29 AM | 6,954 Views
Hello everyone,

After successfully building and then flying my Nemo 4S convertible model, I decided to start studying and building a new model: The XTI Trifan 600.
XTI Aircraft Company, based in Denver Colorado, is developing this revolutionary design aircraft.
Based on the images and videos that I could find on the internet, I tried to draw inspiration from the lines of the Trifan 600. I do not claim to obtain the exact shapes. I miss my knowledge in my software as well as the technical documentation. I'm just trying to get as close as I can to it.
After the long hours spent on the CAD software, the first screenshots are here.
There is still a lot of work to do but it is already very motivating. I will now have to start the test bench which will allow me to validate the technological components.
Posted by steevie | Sep 13, 2020 @ 04:01 AM | 6,701 Views
Here are some photos taken the weekend of September 5 and 6 in Vicques as part of the Vic'Funfly meeting.
I took part in it with my Nemo 4S model and the Freewing L-39 ALbatros. I thank my friend PAG for the photos.
Posted by steevie | May 25, 2020 @ 07:00 AM | 10,220 Views
Satisfied with the flights of my first VTOL Nemo model, I chose to build a larger model. Here is the 6th flight of my new model with tilting rotor.

Caracteristics :
Wingspan : 1500mm (with motors)
Airfoil : N10 modified 15% relative thickness
Weight : 1300gr
Accu : Lipo 14.8V 4S 2200mAh
ESC : 2x 35A Talon Castle Creation
Motors : 2x Aerodrive Turnigy D2830-11 1000KV
Propeller : slowfly 2x 8x4" (3 blades) (CW and CCW)
Card : KK2.1 with OpenAero VTOL 1.6 firmware

NEMO 4s RC Tiltrotor aircraft (2 min 43 sec)

Posted by steevie | Jun 24, 2018 @ 02:40 PM | 10,105 Views
Thread PAUL's Nemo :

Caracteristics :

Wingspan : 800mm (without motors)
Airfoil : N10 modified 15% relative thickness
Weight : 440gr
Accu : Lipo 7.4V 2S 1000mAh
Servos :
2x ailerons Hitec HS-55
2x Tilts Hitec HS-56 HB
1x elevator Hitec HS-55
ESC : 2x 12A Afrojack opto
Motors : 2x Epower 2204 2300KV
Propeller : slowfly 2x 7x6" (CW et CCW)
Card : KK2.1 with OpenAero VTOL 1.5 firmware
Receiver : frsky

Video of my Nemo version
NEMO VTOL (3 min 15 sec)

Posted by steevie | Dec 28, 2013 @ 08:00 PM | 11,485 Views
This is some pictures of my Edge 540 epp model project.

Caracteristic :

Wing span : 880mm
Length : 870mm
Weight : 160gr
Posted by steevie | Aug 03, 2008 @ 08:33 AM | 18,666 Views
The Mini Vector is finished and painted. The Light is instaled.

Posted by steevie | Jul 28, 2008 @ 04:26 PM | 19,686 Views

This is some pictures and video to first flight of Mini Vector.
Best regards,


Mini Vector with pyrotechnic engine (0 min 41 sec)

Posted by steevie | Jul 20, 2008 @ 06:52 AM | 20,390 Views

This is some pictures of my new model project. A mini Vector with a pyrotechnic engine.

Caracteristic :

wingspan : 600mm
long : 490mm
weight without pyrotechnic : 60gr
Radio : 2 servos BlueArrow 4,3gr, Lipo 1S 300mAh
All part Depron 3mm

Posted by steevie | Aug 12, 2007 @ 03:45 AM | 25,393 Views
My X-15 model with pyrotechnic motor :
Wing span : 350mm
Length span : 730mm
weight RTF : 130gr
Radio : 2 servos BlueArrow 4,3gr, Lipo 1S 300mAh

The structure of the fuselage is made with Depron 6mm. The formwork is in 3mm. The cabin with before is sandpapered in roofmate
Posted by steevie | May 07, 2006 @ 10:40 AM | 22,720 Views
Hello everyone,

I've uploaded a couple of photo in flight from my new F-5 Tiger with the colors of "Patrouille Suisse". I thank Pierre-Andre who is the author of the photos.
The model is Parkjet T-38 Talon of Steve Shumate modified in the F-5 Tiger.

Here some technical information :

Weight : 566gr (18.7Oz)
Moteur : Brushless Apache APL20-20
Accumulator : Polyquest 3S1P 1800mAh
Variator : Phoenix 25
Servos : Wing 2x Hitec HS50, Hitec HS55 for derive, Hitec HS56 for stabilator
Propeller : APC 8x6" SlowFly
Receiving : Schulze Alpha 840

Videos :
Vidéos of the flight of my first model are available here :

Best Regards,

Posted by steevie | Apr 23, 2006 @ 03:02 AM | 21,445 Views
I practise the model aircraft on the ground of Vicques in Switzerland.
I am member of the club of "Aéromodélisme Jurassien Delémont" (
Our Track on grass measurement 130m of it length and 30m broad. It is an exceptional place to make fly of the models. Here some photographs of the 20, 21 and 22 April.

Posted by steevie | Apr 07, 2006 @ 11:22 AM | 20,979 Views
The day of opening BaselWorld 2006 in Switzerland, the mark Hamilton (Swatch Group) organized an exceptional show on its stand. Nicolas Ivanoff was present with his Cape 232 of Red Bull Air Race. The Team AMJD associated with Slowflyer for event built counterparts in small-scale models and carried out a race "indoor" on the stand. The goal was to reproduce most accurately Reb Bulll Air Race but in indoor (figures and freestyle).