Posted by old4570 | Today @ 06:30 PM | 244 Views
Micro Tundra with Stunt Flaps (6 min 28 sec)


So I did the mixing a little while ago and finally got to test fly the MT with Stunt Flaps :

Stung Flaps

The flaps are mixed to the elevator , rates are dropped to about 30% for the mixed flaps . Flaps move in the opposite direction to the elevator .
What I am after is increased lift when the MT is on it's back . I am trying to tune out the attraction to terrible firmness that the flat (?) bottom wing has .
And it looks to have worked a treat , more than enough authority to keep the MT on it's back .
Just need a very nice wind free morning / day to fly the MT on it's back .


Posted by djmoose | Today @ 04:41 PM | 396 Views
Available at Legend Hobby: https://www.legendhobby.com/product/...r-care-yak-11/

Enjoy this relaxing montage of videos and photos of this beautiful Seagull Perestroika. You might think I went a bit overboard...but I had a BLAST creating this mini movie. I hope this conveys how I look at airplanes...and I hope that this shows off the beauty and style of this Reno racer.

Relax with the Seagull Model Reno Air Care Yak-11 - Perestroika Build Finale Mini Movie - Chapter 7 (6 min 47 sec)

Posted by KwadSkwad | Today @ 04:39 PM | 374 Views
it's coming to fruition

3d printed DLG wing

Zone V2 airfoil for 1m plane
Posted by DutchRC | Today @ 11:25 AM | 673 Views
Howdy people

another new Diatone quad?!?! :O ahhh well sure.. why not :P And you could be mistaken to think All new offerings in this space ar Light Weights..
I'm happy to see at least this one is Also fun to fly in a sporty way

Link to one of them: Diatone Roma L5 digital version

I should add that was a bit disappointed by the flight-experience at first.. It definately needs a different tune

First look + a few test-flights

Diatone Roma L5 ! :O 4S & 6S - Digital or Analogue - First Look + Test Flights (30 min 8 sec)



Feel FREE to add your thoughts / experiences /video's / questions to this thread!

Specifications:
type: Long range FPV cruiser
wheelbase: 214 mm
base thickness: 4mm arms
material(s): carbon fiber + allu
dry weight: 215 grams
flight controller: Mamba F722 AIO Mk1 board
firmware version: Betaflight 4.2.5
ESC's: Mamba 35A Blheli (AIO board)
motors: Mamba 2004 1700 Kv or 2900 Kv
propellors: Gemfan 5125 3-blade
FPV camera: Caddx Nebula Pro (for DJI)
VTX: Caddx Vista / DJI Digital
GPS: M8PLUS
Lipo: 1050 mah 6S or 1300 4S
OSD: yes, by DJI
smart Audio: DJI Digital
buzzer: yes
LED's: nope
spare props: nope. 1 set in the box
Posted by kathyy | Today @ 09:28 AM | 764 Views
I have an unfinished Focke Wulfe 1990 D-9 by PICA. Don't know what to do with it nor do I know what to sell it for. 65" wingspan, 730" area - for 4 to 6 channel radios and .60 engines. Choose from 3 versions (stated on box). Kit RC - 3 1st place winner at US National Champs. Parts made: wings, and fuselage. Any suggestions? Throw out, sell, put back in the rafters?
Posted by ARGliding | Today @ 08:27 AM | 852 Views
Note to self, do not preform a loop below the tree line

delta chase round 2 oops (7 min 26 sec)

Posted by GroundControlRC | Today @ 08:12 AM | 839 Views


Dancing Wings Hobby PITTS 450mm Aerobatic Brushless Micro Biplane BNF Kit - Review Part 5 Conclusion

Get One Here: DWH Pitts 450mm Wingspan Aerobatic Biplane
https://www.banggood.com/custlink/3vvd8QP0qv

RadioMaster TX16S Multi-Protocol OpenTX Transmitter

Get One Here: RadioMaster TX16S Transmitter
https://www.banggood.com/custlink/DvvycmfSMK

Here is a link to the Video:
https://www.youtube.com/watch?v=QpwR70XKvE4

This Plane is Courtesy of Banggood, I want to than Banggood for sending this Plane for Review ;-)

2 Pairs HQprop Durable T5X3 5 Inch 5030 Propeller
https://www.banggood.com/2-Pairs-HQp...47791920140372

Banggood GCRC
https://www.banggood.com/custlink/GmDmQ1nVkO

You can help support us by using our affiliate links to the products above. A small commission (At No Cost To You) helps us buy more items to review.

#GroundControlRC #GlueAndFly #GCRC #GFS #ScratchBuildPlanes #DancingWingsHobby #Pitts450 #PittsBiplane #RadioMaster #TX16S #OpenTX #4in1Module Best Cheapest


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC™ Glue & Fly™ Series Scratch-Build Planes

Consider Supporting Our Channel by becoming a Patron at: https://www.patreon.com/groundcontrolrc
Patrons of the Channel will have access to the latest Aircraft Plans & Exclusive Content!

See Us On Youtube | Patreon | RCGroups

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
Posted by Old_Pilot | Today @ 07:49 AM | 914 Views
Well, she flew just fine......until I hit a dirt clod on the runway and sheared the blades off both fans......I knew the fan intakes were low, but I thought I had enough clearance....Oh well, I'll go back to putting the fans higher on the airframes....live and learn
Posted by Jack Crossfire | Today @ 02:48 AM | 1,204 Views
5 miles went down like a brick. The webbing kept the tire from sliding 1 way, but the adhesive did nothing to keep it from sliding the other way. The result was part of it sliding away & part staying in place. That rules out farstening at any single point. Too bad TPU can't stretch like rubber.

Been putting off upgrading the camera controller because it's so rarely used, but it definitely needs an amplifier.
Posted by QuadifyRC.com | Yesterday @ 11:04 PM | 1,438 Views
I've written a basic guide on the cheapest brushless setup that I'd recommend for the 144001. I've been beating on this car for a few weeks now and can say that the setup is robust on 2s. Advantages over stock are:
  • 60 km/h top speed
  • much faster acceleration
  • Double battery life (about 15 minutes vs 6-8 stock)
  • Much more durable due to less weight in a crash
  • Bettery for jumping and cornering due to better weight distribution

Here is the article:

https://www.quadifyrc.com/rccarreviews/144001-brushless-upgrade-the-cheapest-setup-worth-having



[QuadifyRC] 144001 Upgraded with the cheapest brushless setup worth doing (0 min 7 sec)

Posted by lawrence4 | Yesterday @ 10:54 PM | 1,445 Views
Lalysee C.G 125mm gliding ability test (4 min 22 sec)


uninstall rest balance lead 5.3g,
Total weight 157g
C.G 125mm
Wing load : 8.97 g / dm²
elevons setting unchange
great gliding ability

when motor off Lalysee will be automatically turn circle, not found thermal airflow today.

2S 350mAh glide flight time 13mins
single cell 3.75V
Posted by Dirtflirt | Yesterday @ 10:45 PM | 1,454 Views
I spent a few days w B at the farm.
The weather was great and we flew a lot.
There was some carnage however & some fails .
We got a few wins snuck in there though.
We flew a couple deltas as the third was under powered.
My dark jeti suffered a lil setback, back to the drawing board, I think a 12 blade 6s will do it.
I chased AR's planes around w the new Dji fpv drone ,man that was fun, and I even let b take a spin in it.
Finished it off with,(of course) w the dirt flirt and a soul crushing hangover.
The drinks started after the flying of course. We are dangerous enough sober.
I will post more vids here as i can ,there is a ton of vid .Im sure ar will be posting plenty as well .
happy flying guys

First fpv chase (4 min 9 sec)

cub chase full flight (6 min 35 sec)
...Continue Reading
Posted by Justwingit | Yesterday @ 10:41 PM | 1,501 Views
So I shot this video right after the New Year, and managed to misplace it on the computer !

Found it by accident recently...some things are better late than never I suppose :
Hobbyzone Super Cub LP at the Playa in Newberry Springs (11 min 34 sec)


Enjoy the shenanigans and please don't forget to hit that Like, Subscribe, and Notification Bell !


Posted by GBLynden | Yesterday @ 08:31 PM | 1,569 Views
In this video, I fly the E-flite T-28 Trojan 1.1m BNF Basic RC Warbird Sky Ripping With Mountain Views for the second time. My landing was not great, but that is ok with me after a fun flight like that!

E-flite T-28 Trojan 1.1m BNF Basic RC Warbird Sky Ripping With Mountain Views (6 min 8 sec)

Posted by JohnCC | Yesterday @ 09:05 AM | 2,330 Views
ESC - Configurator, a utility designed to simplify updating and configuring of your ESCs.

ESC-Configurator: BlueJay Firmware Troubleshooting & Music 🎵 (Mobula 6 Setup) (16 min 8 sec)


Bluejay is BLHeli_S based firmware capable of bi-directional DShot - so a great choice if you want to run RPM filtering on your rig. This project also aims to clean up and simplify the original BLHeli_S source code. A startup sound editor is also part of the deal.

I flash it to my Mobula 6, some problems and issues occur -- 1 motor stops spinning after the flash of the firmware.

The technical troubleshooting is all left in. Full chapterization.
Posted by ShonanBeachRC | Yesterday @ 08:36 AM | 2,364 Views
I took my ZD-Racing MT-8 (Pirates 3) to the beach again, I'm having a lot of fun with it! Sry about the wind noise!

ZD-Racing MT-8 RTR buy it here!
https://www.banggood.com/custlink/GmvyaYugtd
ZD-Racing MT-8 Without electronics buy it here!
https://www.banggood.com/custlink/Gvmdoy7B5S

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccars #banggood

RC Monster Truck Beach Bashing! (3 min 37 sec)

Posted by lawrence4 | Yesterday @ 06:55 AM | 2,477 Views
Lalysee C.G 120mm test flight (5 min 14 sec)


uninstall balance lead 5.6g,
Total weight 162.2g
C.G 120mm
Wing load : 9.27 g / dm²
elevons setting unchange
more gliding ability
more speedy
Posted by ARGliding | Yesterday @ 06:36 AM | 2,524 Views
Jimmy aka Dirtflirt got a new toy and it's pretty damn cool. He has been itching to get a chase video of my CCub.

cub chase full flight (6 min 35 sec)