Posted by davekra | Today @ 12:17 PM | 24 Views
Vector II wings
Posted by GroundControlRC | Today @ 10:13 AM | 958 Views


Volantex Ranger G2 V757-6 1200mm Wingspan EPO Sport FPV Glider PNF - Fine Tuning Adjustments Session #1

Volantex Ranger G2 1200mm PNF
https://www.banggood.com/custlink/Kmvyc25cCg

Volantex Ranger G2 1200mm Kit
https://www.banggood.com/custlink/KKGRCMVrpk

Here is a link to the Video:
https://www.youtube.com/watch?v=0T_8xVOwZJI

Tutorial - Volantex Ranger G2 - Fix that bad Thrust Angle
https://www.youtube.com/watch?v=v7CbbKE4ff8

Turnigy 2200mAh 3S 25C Lipo Pack (This is the pack I'm flying)
https://hobbyking.com/en_us/turnigy-...asc=7408559959

GNB 11.1V 2200mAh 3S 110/220C Lipo Battery XT60 Plug (Not Tested but should work)
https://www.banggood.com/GAONENG-GNB...47791920140372

URUAV GRAPHENE 3S 11.1V 2200mAh 100C Lipo Battery XT60 Plug (Not Tested but should work)
https://www.banggood.com/URUAV-GRAPH...47791920140372

2 Pieces 8040 Direct Drive Propeller - CW
https://www.banggood.com/2-Pieces-80...47791920140372

Banggood GCRC
https://www.banggood.com/custlink/GmDmQ1nVkO

You Can Help Support Us By Using Our Affiliate Links To The Products Above. A small commission (At No Cost To You) helps us buy more items to review.

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #VolantexV757 #VolantexRanger #VolantexRangerG2 #RangerG2 #Ranger


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC™ Glue & Fly™ Series Scratch-Build Planes

Consider Supporting Our Channel by becoming a Patron at: https://www.patreon.com/groundcontrolrc
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!

See Us On Youtube | Patreon | RCGroups

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
Posted by Tazkiller85 | Today @ 05:03 AM | 1,034 Views
Yep Les Amis,
Elle envoie GRÂÂÂÂVE !!! Reçue en 1 semaine de Banggood, j'ai en test aujourd'hui la Tronsmart T6 MAX. Une enceinte Bluetooth d'excellente qualité, que ce soit dans sa conception que par ses performances ! Grâce au système SoundPulse, elle restitue aussi bien les basses que les aigues et ça, du plus bas niveau jusqu'au maximum du volume. 60W de puissance sur 360°et 2tanche IPX5, cette enceinte est aussi à l'aise à la maison qu'en extérieur. En bref, j'ai trouvé ma nouvelle compagne de vol ! lol . Bon Film et merci à tous pour votre soutien .

Tronsmart T6 MAX enceinte bluetooth - Review Test Démo - 60Watts et 2Kg de bonheur ! (18 min 54 sec)


NOTATAZ : 18.5/20 ça envoie du pâté !!!
Les + : Bon son, Rendu des Bass, Connexion rapide, Menu tactile et lumineux, Puissante !
Les - : Pas de prise USB pour charger un smartphone .

- Enceinte Bluetooth Tronsmart T6 MAX 84€ ( Coupon BGESSUIJI ) Livré en 1 semaine en entrepôt CZ : https://bit.ly/3meLROG
- Tronsmart Element T6 Plus 40W (Livré en 1 semaine en entrepôt UK) : https://bit.ly/3cdikjP
- Tronsmart Oreillettes Apollo Bold (Amazon) : https://amzn.to/3iYlzhX
- Site Tronsmart : https://www.tronsmart.com/

- TABLEAU DES PROMOS ET COUPONS BANGGOOD 2020 (remis à jour régulièrement, pour aider la chaîne, gardez ce lien en favori ou raccourci pour vos achats sur Banggood ) : http://bit.ly/2OiQMPF

- Si Vous voulez aider la chaîne avec un don (tous les dons servent à alimenter les...Continue Reading
Posted by Amanda BH | Today @ 04:06 AM | 1,044 Views
Brotherhobby new 2004LR 1650kv which design for long flight time.
Building with 2s 7in, it can fly more than 30mins
Posted by Jack Crossfire | Today @ 02:48 AM | 1,101 Views
Cable guards installed, hall effect sensors rearranged, & cables farstened. Getting those cable guards to fit around the motor modules & attach to the tubes required some of the gnarliest CAD modeling. A revision would definitely involve screwing them onto the tubes instead of gluing them.


Wrapping the cable in captain tape & hot gluing the captain to the plastic proved to be the best way to farsten it. A 6mm diameter proved to be the narrowest PLA worm size before it crumbled.

The cable guards still aren't perfect. The laminations have to be smoothed. A heavier cable snags less than a skinny wire, so a bundle of captain where the cable meets the cable guard helps.
Posted by Ash12 | Yesterday @ 11:23 PM | 1,133 Views
Has anyone ever tried to take turns off a stock brushed rs540 motor to make it go quicker? Just wondering what would happen 😂 I guess it would up the amps and speed? Anybody?
Posted by jmxp69 | Yesterday @ 09:01 PM | 1,173 Views
Want to change out the pots on your Radiomaster TX16s?

How-to Upgrade Radiomaster TX16s Sliders (5 min 22 sec)

Posted by basslord1124 | Yesterday @ 08:38 PM | 1,177 Views
Introducing a balsa model project to my youtube channel...a Vinh Quang DHC2 Beaver with a cool looking military color scheme.

Vinh Quang (VQ) DHC-2 Beaver project intro - balsa construction, .40/.46 size... (4 min 30 sec)

Posted by Marsmann11 | Yesterday @ 05:57 PM | 1,194 Views
For sale - DJI Matrice 210 RTK plus Zenmuse Z30 Optical zoom camera for reduced price.
Plus 4 batteries, carrying case, and ground station case.

https://www.rcgroups.com/forums/show...Z30-and-EXTRAS
Posted by turbinefancy | Yesterday @ 04:55 PM | 1,232 Views
We all have airframes that have not been flown a while. Maybe it’s outdated, under powered or just isn’t as flashy as the latest and greatest. But flying one from the cockpit perspective can make you giddy like kid again, even with the butterfly in the stomach feeling of learning to fly all over - with Head-tracking high definition FPV.

Cobra Jet FPV Aerobatics with Head Tracker (4 min 46 sec)

Posted by jmxp69 | Yesterday @ 02:47 PM | 1,262 Views
This livestream was meant to be a short little live demo showing how to upgrade the TX16s speaker and it turned into a rap session. The speaker upgrade part is covered early though, so if you're interested:

Radiomaster TX16s Speaker Upgrade How-To Live Stream (35 min 16 sec)

Posted by HOTMAILcity | Yesterday @ 01:40 PM | 1,269 Views
◄► Robert Graves .. Poseidon's name, which was sometimes spelt Potidan, may have been borrowed from that of his goddess—mother, after whom the city Potidaea was called: the water—goddess of Ida ..

Ida meaning any wooded mountain .. "Poseidon" means "forest" .. literally ‘(wood) outside’, from Latin foris ‘outside’ ..

The names : Forestier, Forrester, Förster, etc., in literary works, appear to have a philosophical association with the symbolism of Poseidon .. (?) ..

The wild forests of (Le Tell septentrional), s'étendent, before the destruction of Atlantis, sur 2 500 km from Morocco to Tunisia ..

(Atlantic or Atlas) refer literally to (Tall, High)= (الطَّوْل) denote (strength) .. verb (طالَ) = be long, high, great, superior, powerful ..

Murry Hope .. It is amazing to what irrational lengths people will go to disprove something they find difficult to accept, or to prove that which takes their fancy ..
Muck asserts, that Atlantis received its name from the high mountains, that dominated its impressive landscapes, and gave it, in turn, to the surrounding Ocean ..

IT'S FIRST KING was designated the son of Poseidon, GOD OF THE SEA, and paralleled with Atlas, bearer of the heavenly vault ..

◄► The Tell Atlas is a mountain chain over 1,500 kilometres in length, belonging to the Atlas mountain ranges and stretching...Continue Reading
Posted by Joe Pierson | Yesterday @ 11:55 AM | 1,318 Views
Here is my Bryon Gee Bee I built in 1996, Man it did fly Beautiful! Here is is With Delmar in Sant Barbara Ca. Delmar, was a Fantastic Pilot you had to see
him fly his Gee Bee the sound of that Radial was Unreal!! The Best pilot I have ever seen, I had a 7 Cylinder Sidel Radial in my Gee Bee!
Joe
Posted by Joe Pierson | Yesterday @ 11:45 AM | 1,327 Views
Here is my Sinbad Glider ready to cover, it has a 94" wingspan and will be electric!
Joe
Posted by JohnVH | Yesterday @ 11:35 AM | 1,402 Views
Check out my Mig29 Maiden! Close call on takeoff :O
Freewing MiG-29 Fulcrum Digital Camo Twin 80mm EDF Jet MAIDEN FLIGHT! (7 min 31 sec)

Posted by bragee | Yesterday @ 09:02 AM | 1,394 Views
Some flights above Spain ground in Castilla y Leon region.
Flying above cows always looking for the best light.
Medium range sessions performed with R9M module on Jumper T12pro.

Music: Behind the wheel. Depeche Mode.

Castilla y Leon by drone. Spain FPV experiences for cinematic aerial footage (5 min 51 sec)

Posted by vperko | Yesterday @ 02:25 AM | 1,631 Views
Les here are some pictures. Let me know what information you would like.
Thanks and keep me posted.

Vince P.
928 853 2495
Posted by junglegym | Sep 17, 2020 @ 11:13 PM | 1,850 Views
Posted by gke | Sep 17, 2020 @ 09:37 PM | 1,935 Views
Here are some key measurements of my PopCorn constant chord flying wing or plank. The unusual tail boom allows “parking” into the wind at high angles of attack without the tail fin being masked. This is useful on the slopes or when doing steep descents into tight landing spots.

The wing is 900mm span with a 250mm Chord. The wing has a simple 3mm spar of 3mm hard balsa inserted by simply sectioning the wing at 700mm from the LE and then sandwiching the spar. The airfoil is an EMX07 by Martin Lichte (use Profili). The foam is as light as you can get -i.e. packaging foam. The trailing edge is cut off and a 3mm stiffener added. The new trailing edge and full width elevons are made from standard TE stock with a 1.5-2mm sheet extension to follow the lower airfoil profile - the exact shape is not that critical but the closer to the original reflex the better. I used bottom tape hinging. The ends of the wing are capped with 2mm ply for a bit of protection.

The Skin is 0.75oz glass cloth finished with 3 coats of water based polyurethane. Wetting the wing then wrapping the cloth around and pegging it on the clothes line at the TE works fine. There is no LE but a woven packaging tape added after does offer some protection. Wing build time is very fast - less than an hour including drying time if it is a hot day.

The fuse extends with the same profile as the bottom of the airfoil to the TE. There is just the single nylon bolt holding it on. Ply plating at the bolt-on...Continue Reading