Spent a couple days checking for all the parts in the kit.
Have ALL the parts (waiting on the Magnum .61) purchased here on RC Groups.
Here are a couple pics from the first 2 days of build.
The 1st 3 pics are of the work bench (4ft x 1' 11") I made((1) 8 foot piece of 3/4" foam, built on 3 Styrofoam Apple boxes. Glued everything to my old computer desk, IT IS LEVEL!!!!,As you can see, I have made my own bench vise.
So far have spent 3 days on the stab and rudder. Figure maybe 2 more days.
IF you have ANY suggestions, I want to hear them....Continue Reading

Found a set of mechanical retracs in my lot pile yesterday.
Took some time and mocked it up for my Mustang, It fits good.
Problem is that the instructions say that I need at least a 180 degree servo.
Could anybody out there point me to a hi-torque, slow, 180 Degree servo?
Any info would help.
Thanks for your feedback and info as given, Dennis.

I am having problems with spinner. As can be seen in pics, the openings where the prop comes out are to big on the 2 blade section of original and worse on 2 where I cut openings. Is there anyplace to purchase 4 bladed spinners? or is it possible to add material to these holes/openings? I just don't like the way they are now!

I am building a p51B with 44" ws. an using OS max .40 for power, will be using Airtronics gear. I just finished building a 4 bladed prop(2 Top flite 14/8's), just for display according to all the people heer that told me would not be good to use.
I will be downloading pictures as I go, so watch soon. Finished the prop, Firewall and plywwod ring in the nose. Just have to figure the plans on how to fasten. This is my first blog EVER, please leave feedback as to how I did,