Hello Guys, Ranger V2 Build video just released! As you know there is a free version so you can review in details and FPV Sport version is available in affordable price. I hope you like this FPV Trainer model. Check the build video and more information in discription. Flight video also end of the build video.

Craycle FPV Ranger V2 Full Build | Free STL / Printed Kit (9 min 34 sec)

Ranger V2 is now our newest 3D printed RC trainer plane. With this model, we aim to reach people who have just started making 3D Printed Model Airplanes and who already have a 3D printer. You don't need to have model airplane building experience. By following the simple instructions in the PDF, you can build the model and experience your first flight right away. Don't be afraid to crash! It's always easier and enjoy to rebuild a model you made. We'll help you here, send us videos and photos about the problem or crash. We'll assess the situation and help you identify the problem.

Check details in PDF User Guide: https://bit.ly/rangerv2pdf
Download Now: Ranger V2 800 mm 3ch Trainer STL File - Craycle Hobby

We are updating the Ranger Mini! Our model, which is free of charge, will soon be offered to you for free with its new look and many new features. We apply the improvements we made in Orca V2 to this model and make it printable with a common setting profile with other models.

Ranger V2 will be offered with 4ch Wing option and FPV Adition version. These two options will be available at low cost and the updated 3ch version will remain free.

As I mentioned in the video, I am starting to work for the FPV version by rearranging the motor position. Follow us...
Printed Kit: https://bit.ly/printed_kits

Other Models: https://craycle.com/#:~:text=MORE%20P...

Printed Kits: https://craycle.com/product-category/...

Craycle Store: https://craycle.com/store/

Craycle Ranger V2 | 3D Printed RC Plane Testing Process (2 min 12 sec)

Here is FPV Orca V2 Build and Flight video together.

Don't forget to subscribe to channel to reach new videos.

We are preparing Crow's flight videos right now!

Craycle FPV Orca V2 | 3D Printed RC Plane Build and Maiden (6 min 8 sec)

We have a new 3D Printed model which is has a place for FC to flight with INAV. Developed for a real racing experience; While the camera is transmitting the view from the pilot's eye, it is also very securely protected. It's also can be a long Range FPV with big loading space (Up to 2200 mah 6S Lipo). With 750mm wingspan it has 200 grams total printing weight using normal PLA.

Instagram to be updated: https://www.instagram.com/craycle/

Beta Version is available now! More details in the product page: https://craycle.com/.../crow-750-mm-...-plane-stl.../

Join Our Telegram Group to discuss Beta Version: https://t.me/+nVjuUotcamw4ZDY0...Continue Reading

New Ranger Mini Build video from the Craft Channel!

How to Build 3D Printed Craycle Ranger Mini RC Trainer Plane (11 min 22 sec)

Here is the organizer box design with a default size of 100x100x50 mm that you can use in your workspace. Moreover, you can download it for free.

This first organizer design will become more useful with your comments as the design develops later. Please don't forget to leave a comment.

If you wish, you can slice the existing design to be smaller or larger by scaling it on Cura.

You can save space by pressing and stacking as many times as you want.

Print Settings;
Nozzle: 0,4mm
Max Layer Height:0,2
Wall Line Count: 2
Infıll: 15%
Any Material

STL Download and more...
https://craycle.com/make-your-own-organizer-box/

.

PDF USER's GUIDE: https://bit.ly/ranger_guide

STL Downlad Link: https://bit.ly/model_library

If you are a beginner so you can build a Ranger Mini and learn how to make and how to fly a RC model Plane. Ranger Mini is a 3ch RC trainer plane. Also you can fly as FPV as make modifications.

We have optimazed the Ranger Mini for normal PLA but if you can use the LW-PLA it’s going to be better.

General Specs
◾Length : 615 mm
◾Wingspan : 800 mm
◾Print Weight : 235 gram
◾Flying Weight : 450 gram
◾Wing Area : 12.04 dm2
◾Wing Loading : 37.5 g/dm2

Recommended Electronics:
◾2204 2300Kv Brushless Motor
◾20A ESC
◾5x3 - 5x2 Propeller
◾3-4s 800-1500 mAh Lipo
◾2 X 9gram Servo
◾Minimum 3ch Transmitter and Receiver
◾Any FPV System if you like.

Ranger Mini | 3D Printed RC Trainer Plane Maiden Flight - Free STL Files! (1 min 40 sec)

Ranger Mini Released!
Free STL files are available from link below.

https://bit.ly/model_library

General Specs
◾Length : 615 mm
◾Wingspan : 800 mm
◾Print Weight : 235 gram
◾Flying Weight : 450 gram
◾Wing Area : 12.04 dm2
◾Wing Loading : 37.5 g/dm2

Recommended Electronics:
◾2204 2300Kv Brushless Motor
◾20A ESC
◾5x3 - 5x2 Propeller
◾3-4s 800-1500 mAh Lipo
◾2 X 9gram Servo
◾Minimum 3ch Transmitter and Receiver
◾Any FPV System if you like.

New FPV ORCA Flight Video on Youtube!

FPV ORCA Flight Video / Auto Takeoff! (1 min 59 sec)

FPV Orca build video on Youtube!

Craycle FPV ORCA | 3D Printed RC Plane - Build (11 min 32 sec)

FPV ORCA test parts available on Cults3d for free. You can download now: https://bit.ly/model_library

You can take a test print before buying for see the print details.

Follow us for more information and to be informed new models on instagram: http://bit.ly/craycleinstagram

5 mm shaft diameter.
35 mm spinner outer diameter.

Our new screw free 3d printed prop spinner design that we made for FPV ORCA.

Also to be suitable for handmade models, we offer you this product for free.

STL download link: https://bit.ly/model-library

Follow us for the next projects: https://bit.ly/craycleinstagram

Youtube Channel: https://bit.ly/channel_sub

We are building a huge library of 3D Printed, Foam, Balsa and composite RC Planes, Drones and Cars.
Visit our youtube channel and subscribe for the next videos and next projects.

Youtube Channel:https://www.youtube.com/channel/UCmA...confirmation=1

Youtube Video:

3D Print RC Plane / Craycle FPV ORCA (0 min 46 sec)

PDF User Guide Link: https://bit.ly/hingemaker_userguide

Free STL Download Link: https://bit.ly/model_library

This tool will make it easy for you to make a perfect CA hinge.
Also will be a standard hinge making tool for all Craycle models.

In addition, a hinge design has been made that you can use for your own balsa and foam models.

You decide which flexible material you will use as a hinge. You can use special materials produced for this, or you can use an easily accessible material such as nylon film (for example: acetate film).

Note: You must print the Hinge Maker at a layer height of 0.15mm.

Follow us for the next projects: https://bit.ly/craycleinstagram

Youtube Channel: https://bit.ly/channel_sub

3D Printing Settings:
0,4 mm nozzle daimeter.
0,15 mm layer height.
Hinge Maker = PLA/PETG/ABS etc.
Hinge = Only TPU or flex filaments.

ORCA Prototype Maiden Flight:

General Specifications
Length : 340 mm
Wingspan : 780 mm
Print Weight : 250 gram
Flying Weight : 500 gram
Wing Area : 12.3 dm2
Wing Loading : 40 g/dm2

3D Print RC Plane / Craycle FPV ORCA (0 min 46 sec)

Our first 3D printable aircraft project FPV ORCA.

Orca is optimized for normal PLA and PetG. It can fly long time with up to 2200 mAh battery. You can put your flight controller, GPS or telemetry module.

Orca has a big loading space, easy printing (support free) and quick assembling process. 35-40 hours printing time and 30-40 minute assembling time.

All you need to make this model is a CA glue, 5 mm carbon rod and 2 pieces between 1 and 1.5 mm daimeter push rods.

ORCA is not for the beginners, it flies very fast and acrobatic! You can also use it as a Racer, FPV and Freestyle.

Building video will be coming soon as possible. But you won't need it because ORCA has a very easy building process. User guide will be enough for build.

STL files available on cults3d: https://cults3d.com/en/users/crayclehobby/creations

PDF User Guide: https://1drv.ms/b/s!Au6X2Jil-WVD6jgs...Pp53u?e=PNfYbw

Follow us for more information: https://www.instagram.com/craycle/