DutchRC's blog View Details
Archive for January, 2017
Posted by DutchRC | Jan 29, 2017 @ 10:01 AM | 5,359 Views
Halloa people

I got me a plane again! Yes.. lot's of quadcopters on my channel, but I sure allso do like flying planes A few weeks ago this Dynam Primo popped up on some sales-sites.. So I ordered me one

Link to this plane: Dynam Primo 1450mm Bush plane

I'll actually have Two video's on this plane Today First up is a show & tell / unboxing video, in which I'll show you all the parts & give you my impression of things..
Later on today, I'll allso have a 'build' instructions video.. Mostly interesting for new pilots

DutchRC - The Dynam Primo 1450mm STOL plane :D - Show & Tell (from Banggood.com) (22 min 37 sec)


Specifications:
Type: bushplane / STOL plane / High wing trainer
Landing gear setup: taildragger
Wingspan: 1450mm
Length: 1015mm
Material: EPO foam
AU Weigth: 1660g
Servo's: 6x 9g plastick geared
Motor: 3720 650Kv
ESC: 40A with BEC
Propellor: 13x6 APC style (isch)
Channels: 6
Flaps: yes
Retracts: no
Lights: no
Posted by DutchRC | Jan 26, 2017 @ 06:36 PM | 5,008 Views
Halloa people

allrighty.. I had been eying the GT2 Crusaders for a while, and finally couldn't resist anymore
So.. I'm a bit late to the party on this one yes :P What is MY take on it though?? Let's find out..

Link to the quad: Diatone GT2 Crusader 200 BNF

I'll be releasing several video's on the quad (if I don't crash it to pieaces that is :P) ... So far I'm pretty happy with it, but have to add I have only done a handfull of flights with it by now

To start with: my show & tell With first test-flight on the GT2 200

DutchRC - Diatone GT2 Crusader 200.. a serious FPV Quadcopter or....?? (from Banggood.com) (27 min 33 sec)


Specifications:
Wheelbase: 200mm
Frame out off: 5mm carbon fiber
Flight controller: Diatone F3
Motors: Diaton D-Silver 2205 2300kV
Propellors: 5045 x 3
ESC's: Diatone 30A BLheli-S
Camera: 600tvl HS1177 CCD with IR filter
VTX: Diatone SP3 48ch - 25mW / 200mW / 600mW
OSD: yes
Lipo: 3S or 4S (not included)
Posted by DutchRC | Jan 17, 2017 @ 04:44 PM | 5,602 Views
Halloa people

I had not tried my hand at flying heli's for a while, and really felt like getting back into those Soooo when this new WLtoys V950 popped up, I grabbed me one
It is a flybarless, brushless 3D capable heli in the lower price range (somewhere in between toy- & hobby-grade I would say)

Link to the RTF version: WLtoys V950 RTF

Link to the BNF version: WLtoys V950 BNF

in this topic I will post several video's, and to flight demo's as well offcourse..
To start though, here is my show & tell With my first test-flight with the heli

DutchRC - WLtoys V950 Entry level 3D Helicopter.. Any good?? - Show & Tell (from Banggood.com) (18 min 34 sec)


Specifications:
Rotor diameter: 460 mm
Body length: 540 mm
Height: 170 mm
Weight: 402 g
Battery: 1500mah 3S 25C Lipo
Flight time: 15 minutes
Motor: 1912 2830 Kv
Tail motor: brushed
Posted by DutchRC | Jan 12, 2017 @ 08:00 AM | 5,273 Views
Hi there people

allright.. now for something Completely different (for my channel at least) :P A brick-based build?! :O Yep.. I came across this brick based RC robot on Gearbest a few weeks back, and I was very interested by it

Link to this robot: Xiaomi MITU builder robot

Quite a cool thing (if you like brick-based / Lego like things)
Here is my show & tell / review / demonstration of it

DutchRC - Xiaomi Mitu Lego Remote controller Robot! 978 parts! (from Gearbest.com) (18 min 59 sec)