Another addition to the family!!
Thanks KR.

Servos and Frames arrived.
Time to start putting Blade together.

Another Beautiful day at the Cape

This is what has slowed my plane building down!
Need to get this project done.

Work to be done on these awesome looking planes.

Turning circles at Cape Blanco.
JW ul and Aspier

Sagitta 900 is ready to fly.
Took a lot of nose wt to get the balance right.

First flight on opening day at Petterson, flew out of the gate with ease.

Just finished up the JW UL, at 1.1 lb. it came in a little heavy for what I wanted.
Now to work on the P51D.

More foam to work with.
60" P51D
60" Electron DS
JW UL.

As we get older we need larger wing spans.

At long last it is done. Rattle canned the fuse. Not a looker but sure should fly nice. Pink was not much help but he always has a questioning look on his face, I like him.

Did not get to maiden at Cape Blanco, looks like I will have to wait tell Petterson opens on November 1st.

Had time to work on the Gulp again.
Found just the right lead for the Ballast tube. 18 of them fit in, adding 9oz. to the plane. Lead has a hole in the center so it can be tied in to what ever amount you want, adding a foam plug between lead for less wt.
November 1 !!!!Petterson butte is open, time to fly. Made it up there on opening day.

BD

Just finished up what I call the Home Brew, not sure of the airfoil. Has a foam body with the battier in the nose. Will take it to Cape Blanco and see how it will DS.

Garden is in, anticipating Salsa Time again.

Fly Fast

Salsa time again with my little helper!!!!
Wonder if I can teach him to fly.

Mog is finished and has tasted the dark side at Cape Blanco

Old plane, old man, new home for the plane.
Will probably recover and get it back in the air.

Wind needs to be coming up the river for some good flying. Large landing zone atop the A.

This DS site almost worked for my 13 oz. Zagy, wind from the right, be sure to not get to close to the water. Yep I had to fish it out once.

This is a slow referbish job!!!

Work shop is in Arlington, OR at the RV park.

Mog wing is ready for covering after one layer of extreme tape. My friend in the tree is saying his prayers (he is wanting me to get this plane done so he can have a mog lunch).