Posted by old4570 | Today @ 12:47 AM | 753 Views
I have spent half the day window shopping ( internet ) and my brain is ready to explode !

I did see a few interesting things , but with minimum orders around 500 to 1000 pieces ( Not dropping $2500 USD on a foam model )

I would like to see a distributor taking on a larger range of models , be nice ..

The other problem is the Ozzi banana ($) , it only worth a little more than half a banana ..

So everything costs more !

I will admit I have a few models to fly , but the weather is not playing nice !

Plus , the low iQ of some from the land of Oz is worrying . Is social distancing really as difficult as rocket science ? ( Apparently )
Posted by GBLynden | Today @ 12:05 AM | 939 Views
This is GBLynden's E-flite UMX Turbo Timber Flight Review In Strong Wind With Bonus Footage.

GBLynden's E-flite UMX Turbo Timber Flight Review In Strong Wind With Bonus Footage (3 min 33 sec)

Here are my Review Notes for this E-flite UM Turbo Timber:

Pros:
- Even with I prop I bent without knowing it before the maiden, it still flew really well!
- Wheel plastic piece update over the first E-flite UMX Timber
- It has a 3-bladed prop like the E-flite UMX Cirrus
- A higher 3400kv brushless motor comes with it for more power
- The plane can fly with 550’s as seen in some of my videos.
- Its lights all over the plane are awesome!
- The new chipset they use in this Timber UM allows for telemetry, just not the new advanced Smart Telemetry!

Cons:
- Longer nose compared to the original UMX Timber.
- Shorter flight times compared to the Ultra Micro Timber.

Link to the E-flite Turbo Timber UMX: https://amzn.to/2unWuZu
Posted by Cox PT-19 | Yesterday @ 11:18 PM | 1,003 Views
The front yard was right on the verge of becoming somewhat solid...before this latest "Gully Washer" rolled through and returned it to a near-marsh condition, so no circle-turning gonna happen out there.

Didn't feel like working on any projects, and couldn't spray paint in the liquid air, so decided it was time to turn some fuel to noise, and jam it all together on Movie Maker.

I promise that SOMETHING will actually fly at some point, and I'll video it!

Model Airplane Engine Runs (4 min 38 sec)

Posted by jmxp69 | Yesterday @ 10:53 PM | 1,020 Views
Hey Guys,

I put the Extreme Vanquish MKII together and came away very impressed with the quality of this ARF. It's really very good:

Extreme Flight Vanquish MKII F3A RC Pattern Plane Build Review - Exceptional Quality ARF (18 min 6 sec)

Posted by rchrist | Yesterday @ 10:25 PM | 1,047 Views
Need to make little adjustments and should be good to test when I finish the build. Don't want to un-settle my other K110.

It have the k123 swashplate converted to 3mm from 2.5mm and the washout arms from the k130 - a bit long, but ok I guess.

K110 3 blade tail assembly rotor head testing (0 min 38 sec)


Ric...
Posted by skyracer068 | Yesterday @ 08:14 PM | 1,435 Views
I have had the RunCam for a few years now. I can’t believe how well this little camera works! Here are my favorite pictures I have taken with the RunCam from over the years....Continue Reading
Posted by Fred1685 | Yesterday @ 05:03 PM | 1,901 Views
I’ll post this again in classifieds. I’m looking for Traxxas Parts. I’m giving my 4-Tec new life and the carbon fiber upgrade. I can’t find the aluminum posts for the bell crank anywhere. Any advice is helpful.

Part number: Traxxas 4321x

Any hobby stores with vintage parts bins would help too.
Posted by slopeboulder | Yesterday @ 02:58 PM | 2,323 Views
Two piece wings and tails. Click on "view all images in thread" to see all pics....Continue Reading
Posted by DBSkyout | Yesterday @ 01:45 PM | 2,491 Views
How I preflight my DLG.

RC Sailplane, Discus Launch Glider (4 min 46 sec)

Posted by alex_nikiforov | Yesterday @ 01:02 PM | 2,670 Views
RunCam Racer Nano 2 CMOS 1000TVL 1.8mm/2.1mm Super WDR Smallest FPV Camera 6ms Low Latency Gesture Control OSD for RC Drone

RunCam Racer Nano 2. Управляем жестами. (7 min 58 sec)


Link: RunCam Racer Nano 2
Posted by DutchRC | Yesterday @ 12:01 PM | 2,760 Views
Halloa people

Time for a side-by-side comparison this time   
on paper the Foxeer Predator 4 & Runcam Racer 3 are very both very similar & capable Racing FPV camera's..
To this I should add that I generally very much prefer the Racer 2 & 3 from Runcam over other camera's.. BUT I am ready to be proven wrong!

Link to the Foxeer cam: Foxeer micro Predator 4 Full-Case version

Link to the Runcam cam: Runcam micro Racer 3

Racing FPV Camera's ? Foxeer micro Predator 4 vs Runcam Racer 3 (16 min 27 sec)

Posted by GroundControlRC | Yesterday @ 09:10 AM | 3,066 Views


Review Part2 - Volantex Sport Cub 500 RTF w/Gyro - Tips, Stalls, & Manual Mode

Volantex Sport Cub 500
https://www.banggood.com/custlink/DmGmUiY16o

Banggood GCRC
https://www.banggood.com/custlink/GmDmQ1nVkO

Here is a link to the Video:
https://www.youtube.com/watch?v=G1ZQFa8t5ps

I really like these Micro EPP Planes because they are so durable and easy to fly with Gyro Stabilization.
I also like the fact that they have an Expert or Manual Mode setting to really have Fun!
Let's take a look at the Features and then get it into the air and see how it performs.
We'll evaluate the stock setup can see if any adjustments are necessary.

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #VolantexSportCub500 #SportCub500 #SportCub #SuperCub500 #SuperCub #Cub #V761 #V765

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Volantex Sport Cub 500
https://www.banggood.com/custlink/DmGmUiY16o

Spare Parts: ***These Parts are for the Eachine Mini P51D Mustang but I believe they are compatible.

Lipo Battery 1S 360mAh for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood.com/3_7V-360mAh...47791920140372

Eachine 3.7V 380mah 25C Lipo **I use these in the Eachine Mini P51D Mustang with no problem
https://www.banggood.com/Eachine-3_7...47791920140372

Brushed Motor 10mm Hollow Cup for Eachine Mini Mustang P-51D RC Airplane
https://www.banggood....Continue Reading
Posted by Old_Pilot | Yesterday @ 07:42 AM | 3,178 Views
Down to control horns, push rods, programming, etc......I did this one to honor two good friends.one crewed S-3's on the America, and the other is Joel Maddox.....hence the tail art.....LOL
Posted by Tazkiller85 | Yesterday @ 06:04 AM | 3,267 Views
Yep Les Amis,
Faut bien s'occuper ... lol ! Bon, voici une petite vidéo qui change un peu des habitudes . Après avoir dépouillé ma serre qui tombait en ruine, je me suis retrouvé avec moult tubes (il m'en reste encore ) que j'ai décidé de recycler . Résultat, un petit parcours FPV pour tiny et cinéwhoop afin de pouvoir piloter en cette fâcheuse période de confinement. Pour fêter ça, un petit concours improvisé pour vous faire plaisir et vous occuper quelques minutes !
Bon Film à Tous ... Merci de votre soutien et surtout ... Bonne chance !

Tinyhawk II Race et HGLRC Veyron 3 en CONFINEMENT ! Faut bien s'occuper ... lol (11 min 40 sec)


Concours du 28/03 12h00 au 03/04/2020 12h00
- Un seul commentaire par personne
- Répondre à la question posée sous cette vidéo (seulement sur youtube )
- Tirage au sort dans la vidéo du 04/04/2020
- Cadeau surprise adapté au gagnant

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :
- EMAX Tinyhawk II RACE : http://bit.ly/2IP7O4J
- Batteries 450mAh X5 : http://bit.ly/3cRiZY2
Coupon remise tazkiller8 chez HGLRC ( VEYRON 3 )
- HGLRC VEYRON 3 4S/6S caddx ratel (chez HGLRC) : http://bit.ly/38ON6w8
- HGLRC VEYRON 3 4S/6S CADDX VISTA (chez HGLRC) : https://bit.ly/2UnC5Nj
- HGLRC VEYRON 3 4S caddx ratel(chez Banggood) : https://bit.ly/3944A7P
- HGLRC VEYRON 3 6S caddx ratel(chez Banggood) : https://bit.ly/397jRFc

- TABLEAU DES PROMOS ET...Continue Reading
Posted by Tazkiller85 | Yesterday @ 06:03 AM | 3,264 Views
Yep Les Amis,
De mieux en mieux !!! Encore une excellente surprise avec cette nouvelle mise à jour Flysky pour la NIRVANA NV-14 ! En effet, Underground FPV nous a un peu abandonné sur ce coup là mais Flysky continu à améliorer son produit, donc si vous avez fait comme moi et commandé votre Nirvana en Flysky, voici une MAJ qui va vous faciliter la vie et vous occuper en cette période de confinement. Décidément une excellente radio, critiquée dès sa sortie par beaucoup mais très largement adoptée depuis par de nombreux pilotes ! Pour le moment ma radio préférée vous le savez ...
Bon Film à Tous et Merci de votre soutien .

Nirvana NV14 Upgrade - TUTO Mise à jour Multi protocoles / Bitmap - Le top ! (29 min 17 sec)


NOTATAZ : 19/20 Ma préférée !!!

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- Flysky FS-NV14 ( COUPON BGfs14 ) : https://bit.ly/2UggPKx
- Hobby Porter JP4 in 1 (Drone Fpv Racer ) : http://bit.ly/2U3EoGI
- URUAV TMX5 4 IN 1 : https://bit.ly/39g4ES4
- VENTES FLASH RC : http://bit.ly/2uxItrM

- TABLEAU DES PROMOS ET COUPONS BANGGOOD 2020 (remis à jour régulièrement, pour aider la chaîne, gardez ce lien en favori ou raccourci pour vos achats sur Banggood ) : http://bit.ly/2OiQMPF

- Mise à jour ( Page Firmware ) : https://github.com/open-flysky/NV14-updater/releases
- Site pour Images : https://www.air-rc.com/aircraft/Happ...obula6_mobula6
- Vidéo mise à jour...Continue Reading
Posted by Tazkiller85 | Yesterday @ 06:02 AM | 3,278 Views
Yep Les Amis,
Une Bugatti volante ?!?! lol . Comme je vous en avais parlé dans ma vidéo du Tinyhawk II Race, voici le HGLRC VEYRON 3 . Un Cinewhoop plutôt efficace dès la sortie de la boite. En effet, une fois bindé et avec un minimum de préparations sur betaflight, il est opérationnel ! Pas de mauvaise surprise donc et au contraire très agréablement surpris par le travail fourni par HGLRC, un appareil de bonne qualité et surtout un excellent support sur le site internet. Non seulement on pourra trouver toutes les pièces détachées mais on y trouve également une notice complète sur l'engin et ses réglages fondamentaux ! En bref, même s'il n'est pas le moins cher des cinéwhoop actuels, il est performant et très rassurant ... Affaire à suivre ... Bon Film à Tous et Merci de votre soutien .

HGLRC VEYRON 3 - Review Test Démo - Cinewhoop léger et efficace (27 min 25 sec)


NOTATAZ : 18/20 Une bonne surprise .

Niveau : Débutants et Confirmés
Les + : Réactif, Précis, Très stable, Autonomie correcte, Doux et puissant, Très bonne qualité d'image, VTX performant .
Les - : Pas le moins cher des cinewhoop, A voir sur d'autres tests ...

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :
Coupon remise tazkiller8 chez HGLRC ( VEYRON 3 )
- HGLRC VEYRON 3 4S/6S caddx ratel (chez HGLRC) : http://bit.ly/38ON6w8
- HGLRC VEYRON 3 4S/6S CADDX VISTA (chez HGLRC) : https://bit.ly/2UnC5Nj
- HGLRC...Continue Reading
Posted by hobiepilot | Yesterday @ 01:26 AM | 3,962 Views
For those who have asked about my previous day job (and nights, and weekends..), the short answer is Electronics. A slightly longer answer: A little bit of everything. And as to some of the details?:

From age 13 I was tinkering with Electronic Experimenter kits, then put together my first RC Tx and Rx kits at 15.. and other related gizmos thru HS. Joining the Army for 4 years in 1970 (yeah, just shoot me..), I got a year of good electronics school in the ASA at Devens. Theory thru transmitters, receivers, antenna systems, and specifically DF, ECM, and even worked avionics during half of my year in Vietnam. When I got out, I worked as a Field Engineer repairing and installing information systems (1st Electronic Store Information System in Indiana).. then the 1st Automated Teller terminals in Indiana. Got my 2nd class FCC and started a company to do CB repairs, followed by 2-way, and another 2 years of avionics, and some cool High-Energy Physics work at Fermi-Lab. I worked at the 2nd oldest PC store in the US, where we stuffed and soldered the components, and repaired VERY EARLY personal computers. One of mine so advanced to have a 5MB hard drive!! (Yeah, I know, funny huh!) In 1982 I started my consulting business, and designed a full duplex S-100 communication board, to link my customer as the 1st to use direct computer billing to Blue Cross/Blue Shield. Helped another company sell millions in stock, with my 6 prototype battery powered CMOS smart terminals...Continue Reading
Posted by microbuilder | Yesterday @ 12:02 AM | 3,117 Views
Posted by Hobby Details | Mar 27, 2020 @ 11:07 PM | 4,200 Views
Best-selling products:
8AWG (1650/0.08) OD:6.8 1m
10AWG (1050/0.08) OD:5.5 1m
12AWG (680/0.08) OD:4.5 1m
14AWG (400/0.08) OD:3.5 1m
16AWG (252/0.08) OD:3.0 1m
18AWG (150/0.08) OD:2.3 1m
20AWG (100/0.08) OD:1.8 1m
22AWG (60/0.08) OD:1.7 1m
24AWG (40/0.08) OD:1.6 1m
6AWG(30/0.08) OD:1.5 1m
Two colors, black and red.
For more Wire and Connector information, see the home page: RC Drone Wire Connector Manufacturer