Antonov 124 landing Barbados 08-05-2013 [HD] (1 min 9 sec)

Antonov 124 Extremely Long Spool Up (11 min 7 sec)

...Continue Reading

II am looking to build a boeing 737-800 modelled in the Caribbean Airlines Livery

Wingspan 68 inches
Length 60 inches
Motors ---Hobbyking 50mm Alloy EDF
Esc's----To be decided
Radio----6 channel
Servos--- 7 X AeroStar Mini Servos
Airfoil-To be decided
Material-Depron bluecor and balsa construction

Looking to make scale, animated speedbrakes and flaps but after ailerons-only version has been tested.

Hello
I recently picked up a testors .049
Engine From a fellow club member friend.
Pictures are Below

I have some 0% Fuel?
will that work?
It isn't starting with that...... i'll try to get off the head to check the plug. I think that's the problem but i don't know if glow plugs just go bad

It's a nice engine.
I just want to see it running

RC HELI HARLEM SHAKE

Harlem Shake RC heli style @ 2013 Las Vegas FunFly (0 min 38 sec)

RC AIRPLANE HARLEM SHAKE!

rc planes harlem shake (0 min 30 sec)

Three weeks ago my TOWER TRAINER 40 MKII RTF arrived. Couldn't get any pics up because camera not working. BUT HERE THEY ARE!
I wouldv'e liked to do a review on it since there is only 1 on the internet and that's with the past engine they used but i don't have the sort of experience and equipment as this is my first glow plane. Really miss that super cub or not.
Break in went well and it started first chance! Some stuff got in the way but i hope to maiden her in a week or so. When i do i'll be sure to get the video posted and stuff like that.

Cheers! and wish me luck

I was asking some prop suggestion so be sure to go over to that thread and say what you...Continue Reading

Ok so i designed this myself
Materials:
HBZ-mini super cub electronics
Hot glue
1 sheet of foam core
glue sticks
business card control horns
wire pushrods
ply motor mount

So i slapped them together and crossed my fingers
Well it FLEW!!!!!

Here are some pics of the finished product
i got a vid but it wasn't as good as i wanted it to be
so i will try to get a next one and put it up

I also used a KFM2 airfoil

3 channel with 2 integrated servos and esc
WISH ME LUCK AND COMMENTS...Continue Reading

More vids

Gordon Bain Barbados Scale Modelers Club (1 min 43 sec)

Another vid

Here are at one of my local clubs

David Lewis Barbados Scale Modelers Club (2 min 43 sec)

Edward Albecker first day at the field BSMC (0 min 38 sec)

...Continue Reading