Jack Crossfire's blog View Details
Posted by Jack Crossfire | Jul 04, 2019 @ 03:17 PM | 2,987 Views
Stabilized gopro 7:

Gopro 7 60fps footage (13 min 50 sec)


Gopro 7 stabilization comparison (5 min 37 sec)
...Continue Reading
Posted by Jack Crossfire | Jul 01, 2019 @ 02:11 PM | 3,758 Views
The price of the labor means nothing if they're good. Maybe Hindustan Computers Limited isn't the best at writing airplane software. Some of the smartest people in the world are Indians making $9/hour. Some of the dumbest are USicans making $400/hour. If wealth was fairly distributed, there would be a recession.

Software written to buried sections within a million page spec tends to miss the details that come from casual use. The relevance of a piece in the big picture gets lost. What happens if the piece fails gets lost.

Boeing has a long feedback loop beginning with a guy in Seattle who just writes a spec, a guy in Mumbai who just implements it, & a pilot who just tests it years later. We've all applied to large aerospace companies. All they want are PhD's in exactly 1 function, who have spent their entire lives doing 1 function without ever seeing anything else.

Maybe if the guy in Seattle implemented it & had a way to test it instead of writing out a spec for someone else, the loop would be shorter.
Posted by Jack Crossfire | May 01, 2019 @ 12:59 AM | 1,711 Views
Ironically, an average game written for the Commodore 64 today would actually be more popular than a mobile app, just because a lot less games are written for it & because there's a lot of interest in retro computing. Wanted to make a Robotech game for the C64.


While the failure was attributed to lack of focus & development tools, what the lion kingdom wanted was really too ambitious for the hardware. A full recreation of the TV universe, with a fully functional veritech fighter that could fly anywhere in the TV show was not possible. Lions even wanted the player to drop into a different screen in battleloid mode, like the TV show.


What was possible was a recreation of single locations in the TV universe, with the veritech in just 1 of its 3 modes at a time, & a single opponent. A complete level could be the 1st encounter with an alien in battleloid mode. The emphasis could be replicating the visuals & the animation style of the TV show, but not gameplay.


Today, there are much better Robotech games, but none recreate what really made the show work: the love story & the animation style.
Posted by Jack Crossfire | Apr 23, 2019 @ 11:30 AM | 1,490 Views
The Tesla autonomy show had a lot of nuggets about what the typical self driving car startup does. There's a chip which is a scaled up version of a GPU, using stock IP that doesn't use very current feature sizes, but marketed like crazy as a revolution. Something never mentioned before, but which slowly oozed out over the last 5 years is how training the networks still entails manually annotating thousands of images. They have some interpolation, some LIDAR to generate annotations, but most of it is mass Bangalore labor.

A more telling feature was the use of neural networks in place of all conditional statements. Determining if a car was changing lanes was an exercise in thousands of sets of car coordinates manually classified as lane changes. They couldn't just classify it based on x > threshold. Enormous effort was spent doing it with a neural network. How much more effort would have been required to make a pose classifier based on neural networks instead of if statements?


There's still no magic in using a neural network to detect a path. It has to be trained with thousands of images of every section of path in every lighting condition. They all have to be manually annotated or interpolated with path coordinates. All the network does is compress the training set & replay it. The network has to be more like millions of neurons instead of hundreds.
Posted by Jack Crossfire | Apr 02, 2019 @ 12:18 AM | 8,090 Views
It was $400 all in, without the electronicals. After 20 miles, the transmission was extremely noisy, despite lubrication & the sound damper. Despite the noise, the efficiency was a record high of 240mAh/mile empty. 2200kV is a better speed than 2400kV. The hall effect sensor worked without any firmware changes. It actually manetaned the same speed going downhill. There's no brake modulation, so it would have to always deliver the minimum power....Continue Reading
Posted by Jack Crossfire | Mar 31, 2019 @ 10:59 PM | 8,143 Views
These are quite good, by lion standards. After running 20 miles with the crummy speaker, the lion kingdom was willing to pay anything for a better speaker. They have all sounded good over $20 & in the narrow form factor. Below $20, they sounded terrible. Never tried the pancake style ones. The lion kingdom is continually amazed by how good any bluetooth speaker over $20 sounds, compared to anything that small from 30 years ago.

The old speaker was a TV speaker modified to be very light, for a smaller vehicle. The smaller vehicles are no more, so the old speaker may end up converted into a headset.


Millenials would freak out over how bad it is, compared to their $200 Bose speakers. A generation exists which has never heard sound as bad as a 1970's transistor radio. The lion kingdom manely grew up with the sounds of 1970's transistor radios & clock radios. You wouldn't think something mechanical like a speaker could be improved.
Posted by Jack Crossfire | Mar 17, 2019 @ 08:21 PM | 9,262 Views
Tried getting 5A out of it by installing a fatter power cord with direct soldering. It still maxed out at 4.2A. The reason is the maximum power is 50W. Looking at the Ruideng showed the power maxing out at 55W. The same charger is marketed as 50W - 90W, depending on the seller.


Having run the Ruidengs at 5A so many times to test halogen lights, inverters, & battery chargers, it was definitely worth getting the 5A version instead of the 3A, though the bluetooth & USB options were worthless. The heatsink with no fan hits 41C at 50W. It's also proven useful to have the full Watt indicator of the default firmware instead of flashing minimal firmware on it.
Posted by Jack Crossfire | Mar 05, 2019 @ 02:03 AM | 9,630 Views
Watched it in a manely empty IMAX theater. The audience was 1/2 of 1% of the usual audience size. When the flying part ended, some left. There was no-one under 50. For someone following the space program long before SpaceX, it was the same as many other documentaries we watched for the last 40 years. For those who just discovered the space program because of SpaceX, it should be exciting.


The sharper footage was manely confined to the liftoff, while the rest was the familiar 16mm & TV footage shown in split screens. They didn't use the slow scan footage of the 1st step but instead showed the view looking down from the window. Buzz's egress was the only thing shown in slow scan footage.


The 65mm footage was much smoother than expected, while lens aberrations of the time were greatly magnified on the big screen. The 16mm footage was much grainier than we've seen it before. Those of us who have viewed 8k scans of 35mm are familiar with how grainy film is at that resolution, so it's definitely not a cinematic effect.


The only revelation for the lion kingdom was new footage Buzz took of a solar eclipse from the capsule. He couldn't hold the camera steady enough to capture the corona, but he described it.

After the ordeal of driving 2000 miles & camping overnight to see 2 minutes of solar eclipse, masses of tourists are just going to take a rocket flight to the right place in space to see a solar eclipse, any time they want.
Posted by Jack Crossfire | Feb 01, 2019 @ 03:17 AM | 18,458 Views
To the stars (0 min 11 sec)



The engine that's taking us to the stars. At least, seeing it brought more confidence than the last month of layoffs & artwork. They definitely got derailed with the focus on the shiny nose, then the thing getting blown over & a month in launch delays to repair the decoration.


The engine was radically different than any previous design, with a turbopump mounted in line with the combustion chamber. Many pipes had to be very long to do that, but it might be lighter to have the turbopump inject oxygen directly into the combustion chamber. This allows more engines to be packed in a smaller horizontal space.

To make the pipes longer, they had to be very narrow. The Merlin famously uses very narrow pipes & high velocity fluid. They operate right at the limit of how fast a fluid can travel through a pipe.


They could also have the turbine on the very top, driving a fuel pump which forces fuel down into the oxidizer pump, which forces the mixture into the combustion chamber. Oxygen is usually the one they want to minimize contact with.


The powerhead is going to be a deadly stick when swinging from the thrust vectoring. It looks more like a traditional jet engine.
Posted by Jack Crossfire | Jan 30, 2019 @ 09:50 PM | 32,569 Views
APOLLO 11 [Official Trailer] (1 min 53 sec)



Impressive restoration of what they claim to be unseen 65mm film. Pretty sure every 65mm piece of film has been seen. There were other restorations, but nothing this sharp. For All Mankind used Gemini footage as filler. It almost looks computer animated, but it's real. They use still photos that were definitely 70mm.


In 4k, it looks more like 35mm. The trick is 65mm in 1965 was equivalent to 35mm for still photos, since the frames were stacked vertically. Only IMAX stacked frames horizontally. The generation that lived during the IMAX film era would be disappointed by what was called 70mm in 1965.


There were 70mm movies, in those days, but it's almost unheard of for the very best cameras to be applied to a space program. Today, they're only documented by a small number of amateur photographers.
Posted by Jack Crossfire | Jan 22, 2019 @ 01:59 PM | 18,765 Views
https://www.popularmechanics.com/spa...ainless-steel/

Most interesting was the double hull idea & that it was never proposed before, which probably means it was proposed before but didn't work. A lot of money & people were invested in carbon fiber rockets for the last 100 years for stainless steel to be that easy. It's a case where the heavy, expensive carbon fiber could be the tried & true solution while the shiny stainless steel could be the risky solution.


He claimed to be on his own in promoting stainless steel, which revives the ages old debate on whether sole visionary leaders or large teams contribute more to progress. We may never know how much of Apple & SpaceX were really contributed by their sole visionary leaders or their lowly employees.
Posted by Jack Crossfire | Jan 20, 2019 @ 07:58 PM | 18,770 Views
PHX4 Rocket launches to over 200000' attaining the highest amateur two stage flight. (15 min 55 sec)



Took a while to show up in the lion kingdom's gootube recommendations. 46 miles is pretty huge for a private individual working with a few friends & a truck. In 4 miles, he's at the scientific definition of space which is rapidly becoming 50 miles.

Very conspicuous how the rocket was never photographed & the design was never revealed. The internet guessed various commercially available motor sizes. The only design clue is a long ramp for lifting off. He's well within ICBM territory & either didn't want it used by terrorists or was banned by ITAR. The terrorism danger is going to keep amateurs from sharing plans & getting into space for some time.
Posted by Jack Crossfire | Jan 13, 2019 @ 03:23 PM | 18,715 Views
Lions have to remind themselves they've actually seen 2 Apollo capsules & the Apollo program was a bigger childhood fascination than the shuttle. Most humans are lucky if they just saw the Apollo 11 capsule on tour. Lions of course covered a shuttle, too.
Posted by Jack Crossfire | Jan 13, 2019 @ 05:06 AM | 18,555 Views
Intriguing news about a Falcon 1.9 being planned for after the main development of the BFR is done. The Falcon 1.9 would be somewhere between the Falcon 1 & never realized Falcon 5 & provide an alternative to micro launcher startups. They want some amount of it to be reusable, maybe all of it if it uses raptors.


It means they're finding these micro launcher startups really are going to impact their business by filling a niche that the BFR can't: small 1 off satellites going to unique orbits, which can't share a launch with hundreds of other satellites or wait for all the other satellites to be ready. It also means major parts of BFR development could wrap up sooner than we think.

Never Seen Before Concept Designs At SPACEX!!!! (4 min 35 sec)

Posted by Jack Crossfire | Jan 10, 2019 @ 01:51 PM | 18,637 Views
So what happens to Blue Origin now that Jeff & Mac have split?

Technically, if the stock market continued rising, Jeff Bezos could have funded Blue Origin with $1 billion every year for the next 136 years. After the divorce, it's optimistically only 68 years. In reality, Seattle's community property law is imaginary. Most divorces end up with an equitable distribution like everyone else.

Based on non monetary contributions to the "community property" like raising kids, managing Jeff's finances, creating an anti bullying organization, Mac will take most of Blue Origin's funding. That could reduce Jeff's nest egg to just $30 billion.

The reality is either the stock market won't keep going up or $1 billion per year won't be enough to fund Blue Origin. It certainly isn't enough to buy 1000 houses anymore like it was 10 years ago. That $1 billion/year pledge was always a tenuous issue.

He certainly didn't plan on spending everything on Blue Origin. Every time he exercised his options, the stock price went down. Then, he's not free to buy anything he wants. If he doesn't invest most of his options in charities, he's gone & he's so far not keen on quitting his job for the cause of space.

The biggest impact will be Mac now owning a majority stake in Blue Origin. She could decide this space stuff is stupid & shut it down or at least slow it way down as Richard Branson did to Virgin Galactic.
Posted by Jack Crossfire | Dec 26, 2018 @ 01:57 AM | 22,080 Views
It burned 330mAh/mile to carry the required batteries & food.
Posted by Jack Crossfire | Dec 25, 2018 @ 02:51 PM | 21,829 Views
How did we end up with old fashioned stainless steel as the ideal material for making spaceships? Most of us older than millenials have lifted pieces of steel. It's very very heavy. Lions 1st encountered stainless steel on boats in the 1970's. Stainless steel became widely available in the 1930's.


Steel represents the reality of how materials engineering experiences 100 year breakthroughs followed by decades of small steps. For interplanetary colonization, we're still limited to the steam boiler technology our ancestors created. The last 100 years of carbon composites created small improvements but just weren't the generational advancement required. Old timers wondered what advancements happened since the X-33 to enable large carbon fiber tanks now & the answer was not really enough. Steel isn't ideal but it's all we have.
Posted by Jack Crossfire | Dec 19, 2018 @ 01:19 PM | 21,454 Views
Boring side wheels (0 min 10 sec)



The lion kingdom gathered individuals weren't allowed to photograph their demo rides through the boring tunnel. The sled idea gave way to retrofitting existing cars with side wheels in front. It sounded rather bumpy, since the side wheels on a monorail are pneumatic, with their own suspension systems. The only video of a real trip was on CBS & like any supposedly autonomous car, it was actually being driven by a hipster who was always kept just out of frame. It was implied that the demo would be some fully automated vision of the future, but reality was more smoke & mirrors.

The side wheels do have some compliance. On the one paw, they avoided the complexity of distributing sleds to all the tunnels. On the other paw, it wouldn't have taken a massive sled to do what the side wheels are doing.
Posted by Jack Crossfire | Dec 15, 2018 @ 04:38 PM | 21,540 Views
For the 1st time, an ESC blew up from getting wet. All 3 PFETs blew up. They had been flown in rain, flown from wet fields, but never blew up before. Dunking in puddles finally got one wet enough to do the job. Potted it in aquarium sealer. It's not reworkable anymore.