edwardjohn's blog View Details
Posted by edwardjohn | Dec 03, 2021 @ 10:09 AM | 26,097 Views
It's almost as good as DJI if you give it a good camera!
Flight ✔
Gimbal ✔
Obstacle avoidance ✔
Camera 🤷‍♀️

Get it here 👉 https://www.banggood.com/ZLL-SG906-M...p-1894916.html

My written review to be updated here.

Stay tuned!

ZLL SG906 MAX1 5G WIFI Unboxing, Getting Started for Beginner & Review (7 min 42 sec)

Posted by edwardjohn | Nov 10, 2021 @ 11:55 PM | 9,431 Views
Name: eachine eat14 front.jpg
Views: 0
Size: 387.0 KB
Product : Eachine EAT14 RTR 1/14 75km/h Brushless RC Car
Price : US$139.99 - US$159
Where to get : https://ban.ggood.vip/10qRM
Coupon code for $139.99! : BGSEAT14
Specification : https://www.banggood.com/Eachine-EAT14-RTR-1-or-14-2_4G-4WD-75km-or-h-Brushless-RC-Car-Vehicles-Metal-Chassis-Full-Proportional-Model-Toys-p-1891508.html?p=DG23031123036201501P

Is it a Wltoys 144001? Watch video below to find out!

Watch the video below to find out!
Broke my RC Buggy Playing Jumps at the Skatepark 😥 Eachine EAT14 (8 min 40 sec)

This is basically a Brushless version of Wltoys 144001 with a different color bodyshell and rear wing. That’s it. But, it’s nice and refreshing ya.

From the outside, it looks the same as the WLTOYS 144001 and Yes! Side by side, measurement, everything the same as Wltoys 144001

Comes Ready to Run with Remote, the car, 2S 2800mAh battery, USB charger.
The brushless system is a 60A ESC and 2845 3400kv according to the spec sheet. Pretty high KV.

Has a wheelbase of 190mm just like the WPL D12 which is great.

It claims to do 75km/h but as usual that’s not true. Everyone on the internet did about 60km/h but I managed to do higher speed, what the video above to find out how!

Things I like,
1. The car is damn stable! Really. During the high speed attempt. Me lowering the ride height probably helps too
2. Steering is damn smooth! Though it looks like a cheap servo
3. The shock absorbers does work! Don’t trust me? Toss...Continue Reading
Posted by edwardjohn | May 21, 2021 @ 01:51 AM | 32,221 Views
Product : HOTA F6 4x250W 15A 4 Channel Smart Balance Charger with Type-C for Lipo LiIon NiMH Battery
Price : US$110.99
Where to get : https://ban.ggood.vip/YlfV
Specification : Link here

Link to download manual : https://go.edwardrc.com/3ozwQsk

A new charger with 4 outputs! Is more means better?

Watch the video below to find out!
Best All-In-One Charger 2021 - HOTA F6 4x15A Charger (12 min 39 sec)

Also it's not just a typical charger, it can be your servo tester, PWM signal reader and PPM output too!

The charger measures at 11.5cm x 12cm x 4.5cm with a stand a the bottom to tilt it up when you want to.
Name: charger.jpg
Views: 1
Size: 309.5 KB
Description: Name: bottom.jpg
Views: 1
Size: 375.5 KB

At both sides, there are Channel 1 & 2 output on the left, and Channel 3 & 4 output on the Right.
...Continue Reading
Posted by edwardjohn | Mar 24, 2021 @ 12:03 AM | 9,566 Views
Where to get : https://ban.ggood.vip/XzDd
10% off discount code: BGSEAX65

PID tuning is so "locked in" right out of the box! Great for beginner!
There's coupon inside for Payday Sale!

More details in the video review below including flight video with Mobius.
URUAV Flipo F95 2.5in Cinewhoop (6 min 27 sec)

Posted by edwardjohn | Jan 19, 2021 @ 07:36 AM | 12,485 Views
Product : SPCMAKER Mini Whale HD Pro 78mm F4 2-3S Whoop FPV Racing Drone PNP BNF w/ 1103 10000KV Motor 25/400mW VTX RunCam Split 3 Micro 1080P Camera - Frsky
Price : $142 to $155
Link : https://www.banggood.com/SPCMAKER-Mi...1123036201501P

Go straight to the video below to watch my explanation on why the "Sorry."
Do subscribe if you have not done so!
New 2021 SPCMaker Mini Whale HD Pro - Honest Review (7 min 56 sec)

Design - What do you think? Don't you think this is a very good looking mini cinewhoop! Compare to the previous version, this has the motors and propellers beneath!
Name: spc maker mini whale hd pro (2).jpg
Views: 17
Size: 198.4 KB
Description: Name: spc maker mini whale hd pro (3).jpg
Views: 16
Size: 199.5 KB
Description: ...Continue Reading
Posted by edwardjohn | Jan 19, 2021 @ 03:48 AM | 12,494 Views
Eachine Airloader! This is my new favorite looking plane of year 2020! Instantly felt in love with the look and it being a twin tractor!

Product : Eachine Airloader 1280mm Wingspan Twin Motor Three Motor EPP Ultra Long Range FPV Plane RC Airplane KIT/PNP - KIT
Price : $146.99 for KIT and $196.99 for PNP
Link to get one : https://www.banggood.com/Eachine-Air...1123036201501P

*Disclaimer : this is a review unit provided by Banggood

Despite the brand name Eachine, this is actually designed by the same LTE owner/designer who licensed it for sale to Eachine only.

I get it if some think this is an ugly plane especially with that large opening at the front. Beauty is subjective. Me I think it's the best looking FPV plane from LTE with that evil droid/robot like fuselage from the future. With that Twin Tractor setup, it makes hand launching a piece of cake! You will understand when you have one like the Xuav Clouds and Albabird! I fell in love with it instantly and requested for a review unit from BG which they gladly obliged. Thank you!
Name: Eachine Airloader design.jpg
Views: 43
Size: 129.4 KB

Below is a temporary setup. I want to go light for maiden so there's only 4S 3000mAh in it. It's definitely designed to carry a lot of batteries/mAh to go for long range.
Name: Eachine Airloader design 2 (1).jpg
Views: 22
Size: 160.9 KB
Description: ...Continue Reading
Posted by edwardjohn | Jan 19, 2021 @ 02:32 AM | 12,546 Views
The LTE Rambler RS! Everyone online knows about this Forward Swept Wing in 2020 because of the fight between two YouTubers. I'm gonna put up my honest actual experience here.

Product : LTE Rambler RS EPP 1000mm Wingspan FPV RC Airplane Sweepforward Wing PNP/KIT White - Kit
Price : $119-143 for KIT & $188 for PNP
Link : https://www.banggood.com/LTE-Rambler-RS-EPP-1000mm-Wingspan-FPV-RC-Airplane-Sweepforward-Wing-PNP-or-KIT-White-p-1553436.html?p=DG23031123036201501P

* Disclaimer : purchased with my own money

Spec :
Wing type : Forward Swept Wing
Wingspan : 1000mm
Material : EPP Foam

Firstly the outlook, some may like it some may not, but I like all its line of design from the designer, it looks rather futuristic. Example the Dart XL, Dart 250, Airloader and etc. Rather boxy front fuse but doesn't seem to affect the aerodynamic or efficiency. I had mine rather naked. It will probably look better with fins and stickers put on later.
Name: LTE Rambler RS Design (1).jpg
Views: 17
Size: 92.0 KB
Description: Name: LTE Rambler RS Design (2).jpg
Views: 18
Size: 123.5 KB
Description: ...Continue Reading
Posted by edwardjohn | Dec 31, 2020 @ 03:42 AM | 13,280 Views
Did it go in flames or?

Product : WLtoys WL915 3S Brushless RC Boat High Speed RTR 45km/h
Price : from $94.99
Link - https://www.banggood.com/custlink/mDKdHQezbM

* this is a test unit sent by Banggood

Almost Lost my WL915 Trying 4S on Stock Electronics (5 min 42 sec)

Posted by edwardjohn | Dec 08, 2020 @ 01:07 AM | 11,791 Views
Product : WLtoys WL915 3S Brushless RC Boat High Speed RTR 45km/h
Price : from $94.99
Link - https://www.banggood.com/custlink/mDKdHQezbM

* this is a test unit sent by Banggood

Recently I saw video of this boat and I thought it is cool! I requested for a review unit from BG and they agreed!

What special about this boat is,
- comes setup as 3S which guarantee to be much faster than the normally 2S boat
- self-righting if you flipped over and it works very well!
- it is Brushless instead of Brushed!
- comes with water cooling!
- RTR electronics already waterproofed!
Damn well worth the money for the features above

Always a fan of F1 looking boat. this is my 2nd such boat
Name: WLToys WL915 RC boat review design.jpg
Views: 37
Size: 271.8 KB

The hull is locked with 3 lock, which still leaks badly
Name: WLToys WL915 RC boat review lock (1).jpg
Views: 34
Size: 264.0 KB
Description: ...Continue Reading
Posted by edwardjohn | Dec 08, 2020 @ 12:43 AM | 11,987 Views
Product : Eachine E130 2.4G 4CH 6-Axis Gyro Altitude Hold Flybarless RC Heli (RTF)
Price : $57-$69
Link : https://www.banggood.com/custlink/KDGytN2GkU

*This is a test unit sent by Banggood

A new mini RC from Eachine that I think will be suitable for beginner due to two special features!
- Gyro Stabilized (Flybarless)
- Altitude Hold (essential)
- Lightweight, crash durability (not tested yet)

Here's the box art
Name: EdwardERC Review Eachine E130.jpg
Views: 37
Size: 290.1 KB
Description: Name: EdwardERC Review Eachine E130 box.jpg
Views: 32
Size: 233.0 KB

It's actually a pretty good looking mine RC Heli
...Continue Reading
Posted by edwardjohn | Oct 22, 2020 @ 03:56 AM | 10,835 Views
Name: Multi angle shots (2).jpg
Views: 60
Size: 274.8 KB

Product : SG 1203 1/12 2.4G Drift RC Tank
Price : $62.99 to $76
Link : https://ban.ggood.vip/VHIQ
*** Discount code: BGMY1203 (International)
*** Discount code : BGVIE158 (SEA )

*This is a test unit sent by Banggood.

It's a RC 1/12 replica of the real and very cool Ripsaw made in the US which was a family project.

Out of the box, it's a really heavy tank though. Quality of the plastic is great, and there are many details on the body as mentiond in the video below.

Scale - 1/12
Control - Proportional 2 channel. FW, BW, Left & Right
Battery - 2S 7.4V 18650 1200mAh
Length - 345mm
Width - 175mm
Height - 142mm
Engine - Unsure. see picture below
*Requires - 3 AA batteries

The first impression driving it was "Man this is so cool so powerful!" Whenever you punch it, it just lift off the front. Speed is fast compare to other RC tank and of course it's not as fast as other RC cars, which it doesn't need to be. This is about conquering all terrain with its higher track surface with the ground.

Name: Multi angle shots (1).jpg
Views: 60
Size: 289.6 KB
Description: ...Continue Reading
Posted by edwardjohn | Aug 27, 2020 @ 08:53 AM | 15,302 Views
Have you been wanting to get a DJI but can't afford one? Take a look at this DJI Mavic Mini Clone!
*disclaimer - not for those after high quality videos or photos

Product : Eachine EX5
Link : https://ban.ggood.vip/V1wW
Coupon code : BGSEAEX515 only $95.15 *for SEA
Coupon code15% OFF for EX5 : BGRCEX5N *for worldwide (period 8-12 Sept)

Name: eachine ex5 clone.jpg
Views: 55
Size: 49.4 KB
This is a review unit provided by Banggood.
Option is 2 batteries, 1000m and without bag.

Name: eachine ex5 box (2).jpg
Views: 67
Size: 481.3 KB
Description: ...Continue Reading
Posted by edwardjohn | Aug 05, 2020 @ 09:58 AM | 10,915 Views
Had fun afterwork!
Afterwork - Mobula6 HD (2 min 5 sec)

Really happy with the 1080 Full HD quality!
Posted by edwardjohn | Jul 29, 2020 @ 05:27 AM | 15,117 Views
Hey there! The most popular FPV plane in the world due to its long range capability and cheap price.

Here comes the V2 and i made a video detailing the finding and where you can preorder for now.


Wingspan : 1350mm
Wing surface : 30dm2
Length : 828mm
Posted by edwardjohn | Jul 22, 2020 @ 01:13 AM | 12,268 Views
Name: mobula6 hd orig.jpg
Views: 91
Size: 106.0 KB
Product : HappyModel Mobula6 HD
Price : Normal at $129, Now USD104.72 with coupon code
Coupon code : BGAF7HD
Link to purchase : https://ban.ggood.vip/UCR0

Hi all, welcome back to my another product review!

Name: review pic duo.jpg
Views: 83
Size: 155.3 KB
Anyone like me? I have been flying this Tiny Fake Whoop(Eachine E010 with Beecore) since 2017 and I’m still flying it till today. Surprisingly those Racerstar purple can brushed motors still work though.

So why didn’t I upgrade to brushless system? Well there are so so so many choices out there such as the old Eachine US65/UK65, Eachine Trashcan, Emax Tinyhawk II, Tinyhawk S, BetaFPV Beta65 Pro, iFlight Alpha, HBFPV HBX64, URUAV UR65 and etc. They are all around the price range of $100 which is pretty significant compare to the old brushed Tiny Fake Whoop, so I didn’t get any as I don’t want to risk my $100 getting one that I’m not happy with.

Until recently, Banggood sent me a HappyModel Mobula6 HD, oh boy I’m blown away and I’m sure you won’t regret getting one!

Below are some of the closed up shots as well as its specs.
...Continue Reading
Posted by edwardjohn | Jul 16, 2020 @ 10:36 AM | 17,733 Views
Name: m6d charger.jpg
Views: 79
Size: 110.9 KB

Product : ToolKitRC 500W M6D Charger
Price : $59.90
Link - https://ban.ggood.vip/UxOy
* Banggood summer prime sale will be officially online from 3rd-24th 4pm July. Banggood prepares benefits and coupon rain that worth over one million USD ! waiting for you! Prime Sale is a terrific opportunity for Banggood VIP customers, you can snap up the excellent price even 48 hours before Explosive period!

Hi guys. Received this ToolKitRC recently courtesy of Banggood.

I’ve seen the ads of this charger for soooooo many times over 2 months, I’m interested due to it’s Dual Output feature, at $60 the price it’s alright but it’s without PSU built in so I just wait...

Until one day, Banggood gave me a list to choose 2 products for review and this is in the list, I immediately pick one.

Now to keep this review short, I’m not gonna write about the typical charging features but the extra special features that I like! As compared to my old quad output charger

1. Wide input voltage range
- 7-28V. Out at the field? 2S power supply works too! But I recommend using 6S, higher voltage, less amp going through your input wires. And you are converting higher voltage to current, therefore require smaller capacity 6S pack

2. End discharge voltage level
- selectable from 3.7V down to 2.7V

3. Discharge mode
a. Inter – refers to internal discharge using resistors in the charger, turning to heat
b. Recycle mode – hehe this is when you are done flying...Continue Reading
Posted by edwardjohn | May 09, 2013 @ 02:37 AM | 15,266 Views
Original thread here,

So I opted a Fatshark Predator Goggle for the main reason of convenience, because I've got only 2 hands to bring my fpv gears to the field. A goggle like Fatshark could be strapped on my head while exiting the car.
Since then i never had the mishap of dropping my radio tx into the drain when i ran out of hand.

I also purchased the set of dioptic lens but i have astigmatism and both my eyes have different prescription so those lens somehow don't match my eyes quite well so I still get blurry image.

And none of the local optic shop would be able to custom the lens for us because the lens size required for the fatshark is simply too small for the trimming machine to clamp on.

After months of searching for solution, a good friend who runs an optic shop suggested this.
Is to purchase the original uncut version of the spectacle lens/glass and cut it myself!This is how it looks like, that glass you are wearing was from these!
Sorry. Picture shown is after i cut.

So before you cut, get the measurement first. Depending on your lens thickness and how you would want to fit it. The following pictures may explain better.

According to the measurement you got, lay 2 layers of masking tape on it as a guide. That made it so much easier to cut and protect your lens as well.
Remember to * wear a mask(they release super fine powder!) * cut very slowly! * use a fine saw

And here's the...Continue Reading
Posted by edwardjohn | May 07, 2013 @ 03:30 AM | 18,089 Views
Original thread here,

So i got this F450 laid around without electronics last year(transferred to Reptile) and stumbled upon this yasuo840 on youtube showing his F450 converted a tricopter! it's a damn good idea!
Tricopter KK2.0 FW V1.0 LCD Control Board with Q450 Remodeling Vol.30 Test flight (6 min 6 sec)

Finally got time recently and kicked my ass to start the project.

And the parts were actually already landed in my room like months ago. I ordered them based on those good folks who shared tips of their diy tricopter such as,
1) David from http://rcexplorer.se/category/projects (check out the Tricopter V2.5) for tips on the rear servo
2) Oldman(not sure his name) or Hallstudio from http://www.youtube.com/user/hallstudio for the setup

Here's the result, took me one night

- F450 quad frame
- Sunnysky 1100kv
- F30A ESC
- HBK 30A props. (Lasted multiple crashes and even it's bent till there's a white spot, it still flies w/o complaint!)
- Test Zippy 4S 3000mah or 3S 1800-2200mah. The 4S 2200mah doesn't fit. Damn
- Trex700 landing gear ;D

The flight experience
1) First flown with 3S just to find out how it will fly, indoor. The maiden flight, servo was wobbling quite bad until you can hear oscillation/resonance sort of thing. So tried
- setting Yaw gain and Servo filter, tuning it up and down and still it's wobbling even at Zero gain.
- props off, check motor, prop adapter,...Continue Reading
Posted by edwardjohn | May 07, 2013 @ 02:57 AM | 17,780 Views
Posted by edwardjohn | May 07, 2013 @ 02:56 AM | 17,826 Views