xinte's blog View Details
Archive for February, 2019
Posted by xinte | Feb 22, 2019 @ 03:30 AM | 3,779 Views
Jumper JP4IN1 CC2500 24L01 JP4-in-1 Multi-protocol RF Module Tuner TM32 Version OpenTX for Frsky/Flysky/Hubsan/Walkera
https://www.xt-xinte.com/Jumper-JP4I...a-p571739.html

The Jumper JP4IN1 Module features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board. This module can convert standard PPM signals form module equipped radios in to the RF protocols used by most radios in the market today (See RF Chip data below). This module is plug and play with module equipped radios in the FrSKY series and requires no complex wiring or “hacking” to get running. The module is a great way to improve the enjoyment of your flying experience, using a better radio such as the FrSKY Taranis series rather than the low grade radios commonly included with most kits offers an night and day difference in performance. The Jumper JP4IN1 module is also up-gradable via USB input.

Specifications:
Working voltage: 6-9v
Working current: <=100ma
Operating frequency: 2.4G ISM band
RF power: +22DBM
Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna)
Net Weight: 42g (including antenna)
Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x
Firmware updatable: Yes, via USB.


RF Chip Data
Cyprus Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
Texas Instruments CC2500: FrSky, Futaba SFHSS
Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models
Posted by xinte | Feb 22, 2019 @ 03:28 AM | 3,377 Views
Gemfan 1635 1.6x3.5x3 40mm 1m Hole 3-blade Propeller PC CW CCW Props for 1103 1105 RC Drone FPV Racing Brushless Motor Spare Part Accs

https://www.xt-xinte.com/Gemfan-1635...s-p571904.html

Specification:
Brand name: Gemfan
Item name: 1635 1mm hole 3-blade Propeller
Number of blades: 3-blade
Pitch: 3.5inch
Material: PC
Weight / G: 0.54G
Center hole diameter: 1MM
Paddle disk diameter: 40.8mm
Center thickness: 5.2mm
Maximum blade width: 7.46mm
Adaptation motor: 1103-1105 Recommended motor: 1103

Package Included:
4 or 20 x CW 1635 1mm hole 3-blade Propeller
4 or 20 x CCW 1635 1mm hole 3-blade Propeller
Posted by xinte | Feb 22, 2019 @ 03:22 AM | 3,578 Views
Happymodel 2S 300mah 7.6V XT30 Lipo Battery With Mobula7 V3 Frame for Mobula 7 FPV Racing Drone Quadcopter 75mm Bwhoop75 Brushless Whoop

https://www.xt-xinte.com/Happymodel-...p-p572783.html

Happymodel 2S 300mah 7.6V XT30 Lipo Battery With Mobula7 V3 Frame for Mobula 7 FPV Racing Drone Quadcopter 75mm Bwhoop75 Brushless Whoop

Package include:

1xMobua7 v3 frame

1x2S 300mah 7.6V Lipo Battery
Posted by xinte | Feb 22, 2019 @ 03:20 AM | 3,459 Views
DIY Drone Set Welded Crazybee F3 F4 Pro Whoop_VTX 5.8g 40ch 25mw~200mw VTX Caddx.us Turbo EOS2 Camera for Mobula7 Brushless Whoop Mobula7 Eachine TRASHCAN TC75
https://www.xt-xinte.com/DIY-Drone-S...5-p573099.html
DIY Drone Set Welded Crazybee F3 F4 Pro Whoop_VTX 5.8g 40ch 25mw~200mw VTX Caddx.us Turbo EOS2 Camera for Mobula7 Brushless Whoop Mobula7 Eachine TRASHCAN TC75

Package include:

1x F3 OR F4 Flight Contorller

1x Caddx.us Turbo EOS2 Camera 2.1mm 4:3 NTSC (If you need other version,please inform us in advance)

1x Whoop_VTX 5.8g 40ch 25mw~200mw VTX

Please note that these parts will come welded,like the picture shows,thanks
Posted by xinte | Feb 22, 2019 @ 03:17 AM | 3,388 Views
4pcs/set Happymodel SE0803 0803 Motor 1-3S Brushless Motor CW CCW 12000KV 16000KV 19000KV 1mm Shaft For 65-85mm FPV Whoop DIY Parts for Bwhoop75 Brushless Whoop Mobula7 Eachine TRASHCAN TC75
https://www.xt-xinte.com/4pcs-set-Ha...5-p573061.html
Happymodel SE0803 0803 Motor 1-3S Brushless Motor 12000KV 16000KV 19000KV 1mm Shaft For 65-85mm FPV Whoop DIY Parts for Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75


The motor with red Cable= clockwise CW
The motor with black Cable = counter-clockwise CCW


Item name: SE0803 1-3S brushless motor
KV options: 12000KV(2s-3s) 16000KV(1s-2s), 19000KV (1s)
Shaft Diameter: 1.0mm
Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 3mm
Motor Dimension(Dia.*Len): dia 10.5mm*16mm
Terminals: JST1.25mm
No.of Cells(Lipo): 1-3S
Wire length(include connector): 40mm
Weight: 2.5g
Features:
Super tiny only 2.5g
Compatible for 1s-3s brushless whoop
Ball bearing and Bushing
Double E-clip design, prevent Motor bell to flying off
Good Dynamic balance

Pacakge included:
2PCS Motors CW (Red Cable)

2PCS Motors CCW(Black Cable)
Posted by xinte | Feb 22, 2019 @ 03:03 AM | 3,449 Views
Upgrade 75mm V3 Crazybee F4 Pro OSD 2S FPV Watch / Goggles RC Racing Drone Caddx Eos2 Camera 25/200mW VTX & RC Training Parts
https://www.xt-xinte.com/Upgrade-75m...s-p573234.html

Note, All versions are welded & assembled & tested before shipped from the factory. They are ready to fly.

However, this version belongs to the Professional Remote model , But not belong to toys. Therefore, customers still need certain knowledge and operation experience for such products. If you are not familiar with the product, please do not change any programming settings casually.

If you have any questions, please feel free to contact us. Our technical department will do our best to handle the problem for you.



Specifications:
Item Name: 2S 75mm V3 Upgrade Brushless Whoop FPV Racer drone BNF/RTF Versions
Wheelbase: 75mm

Frame Kit: V3 improvement frame , New design, more durable than V2 , with Mobula7 Led_strip mount hole (The drone not include the LED Strip, If you request, Please feel free to message us for quotation)

Version: BNF FPV Version (Compatible with Frsky) / RTF FPV Version (Compatible with Flysky) ( Optional)
BNF FPV Version: Not include Remote Controller, FPV Watch and FPV Goggles are optional

RTF FPV Version: (Only Flysky Receiver) Ready to Fly, With Remote Controller, FPV Watch and FPV Goggles are optional.

Receiver ( Optional):

Compatible Frsky Receiver
Compatible Flysky AFHDS/ AFHDS-2A Receiver

(If you want to choose the...Continue Reading