Archive for March, 2010
-
Views: 408
Tape the card in the tip and center the neutral on a line. Then make traces at different positions -
Views: 327
-
Views: 350
do the same for the stab -
Views: 339
Write down the pinouts -
Views: 354
get the reverse settings -
Views: 342
and the servo centering as well. -
Views: 320
Antenna protection: Sullivan small cable sheath cut slightly longer than the Bare end of the antenna. -
Views: 314
Slip it over the coax part, leaving some to protect the tip.
Comments (0)
Add Comment