Posted by GroundControlRC | Today @ 07:01 AM | 254 Views

DustOff #6 - Volantex V765-2 Super Cub 750mm PNF - Flying it like a ParkJet ;-)

Volantex Super Cub V765-2 750mm RTF with Gyro

Banggood GCRC

Here is a link to the Video:

This was one of my first Traditional Planes and is still one of my Favorites ;-)
It has plenty of power with the 2S Power System, it's very durable, and very fun to fly.

Here is the Playlist for this Volantex Super Cub:

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #SuperCub #VolantexSuperCub #V765 #DustOff

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

***The New Version is RTF and comes with a Gyro.
Volantex Super Cub V765-2 750mm RTF with Gyro

***Spare Stock Prop
Volantex V765-2 Super Cub 750mm FPV Aircraft RC Airplane Spare Part 7040 Propeller

***Spare Prop (I MOD'd the Prop Shaft and use a different Prop with a Collet - See Video Below for MODs)
2pcs KMP 7040 7X4E 7*4E High Efficiency Propeller Blade for RC Airplane

MODs & Testing - Super Cub - 4 MODs that make a Difference ;-

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC Glue & Fly Series Scratch-Build Planes

Consider Supporting Our Channel by becoming a Patron at:
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!

See Us On Youtube | Patreon | RCGroups
Posted by Bella Liu | Today @ 03:50 AM | 555 Views
For stopping and containing any fire caused by incorrectly charging or poorly functioning lipo packs.
Buy it with factory price with ONLY $2.69/pcs if you buy 100pcs. You can also customize it with your company logo!!

- The safest way to charge and store your lipos.
- Protect your workshop, family and home from the hazard of lipo
-The LIPO SAFE is intended to reduce the chances of damage o charging.
- This is a fireproof bag, designed to stop and contain any fire caused by incorrectly charging or poorly functioning lipo packs.

-Never leave charging battery unattended.
-Always ensure the battery is on a non-flammable surface.
-Ensure flap is sealed while charging.

Pacakge Include:
1 x safe guard charge bag (235*65*180mm)

Get connected with US here!

Email: [email protected]
Skype: Bella---DTN Whatsapp:+86 15818289223
Datton Electronic Tech. Co.,Ltd
Posted by turbinefancy | Today @ 03:39 AM | 601 Views
I just setup a new DJI Digital FPV system on my old Taft Cobra Jet. Also improved looks of the instrument panel using pictures from a real F-5E cockpit. Heres A training flight showcasing how well the DJI FPV camera handle low light situations.

Cobra RC Jet FPV Training (4 min 5 sec)

Posted by old4570 | Today @ 03:35 AM | 631 Views
V911 HLG (0 min 37 sec)

My 3D printed HLG ..

It be a one off 3D print experiment , but there should be a F949 flight board in the mail .

So there might be a more refined version of the V911 HLG in the near future .
Posted by Bella Liu | Today @ 03:13 AM | 637 Views
Quality Tools are essential to all hobby players. Here! you can find the complete types of what you want for repare and DIY. Logo Customization is available!


1.5mm Hex Driver
2.0mm Hex Driver
2.5mm Hex Driver
5.5mm Box Driver

4.0mm Box Driver
5.5mm Box Driver
7.0mm Box Driver
8.0mm Box Driver

Colours available: black, red, purple
Materials: Nano-titanium high-speed steel, SKH-51 imported from Germany
Logo customize: available

The best quality you can find.
Posted by Amanda BH | Yesterday @ 10:41 PM | 1,110 Views
anybody could share your Brotherhobby Avenger 2806.5 building ?
Posted by GEMFAN ts | Yesterday @ 09:26 PM | 1,244 Views
Hey Hey Hey! Gemfan New Gates coming😻😻
How many new types you find?
Posted by HGLRC Company | Yesterday @ 08:57 PM | 1,318 Views
Pre-order now and get a free 2306.5 motor, free HGLRC cap. For first 30 orders only!
Name: Sector5v3_1920_1000.jpg
Views: 0
Size: 1.43 MB
Posted by old4570 | Yesterday @ 08:48 PM | 1,338 Views

Yes it flies !
Still hunts up and down a little ( rearward CG ) , but it flies .
Motor did not cook the prop off the output shaft ! = Thats nice .
Maybe one more bit of lead shot in the nose ?

But it flies
Posted by lawrence4 | Yesterday @ 08:03 PM | 1,526 Views
Space Shuttle Test SUNNYSKY X2212-9 1500KV (6 min 27 sec)

Motor: SUNNYSKY X2212-9 1400KV
Weight: 530g
3S 2200mAh
Posted by Mad_angler1 | Yesterday @ 05:28 PM | 1,601 Views
Ardupilot Copter Build Series

I have started a new Ardupilot copter build series where I will be walking though the steps to setup a Copter based hex from start to finish.

In this series I will also be deep diving into some of the more complex hardware setup with multiple GPS, Mag sensors as well as other external sensors.

The series consists of

Video 1 - Basic Hardware - Frame,Motors & Power System

Video 2 - GPS - Serial and CAN as well as multiple GPS blending options

Video 3 - Compass - Mag setup and overview of the new Compass configuration in Ardupilot

Video 4 - RC Types and Setup - Looking at Herelink, Sbus and other RC options.

More Videos to follow.

Video 1 Basic Hardware

Ardupilot Drone Build How-To Series Part 1- Basic Hardware (30 min 40 sec)

Video 2 GPS Setup

Ardupilot Drone Build How-To Series Part 2- GPS Setup (17 min 57 sec)
...Continue Reading
Posted by RanGee75 | Yesterday @ 12:14 PM | 1,823 Views
Hello all,
Check the new Lightbutner afterburner for the Arrows Mig-29:

Here's a build and afterburner installation video:
Arrows Mig-29 unboxing build and Lightburner installation video (49 min 24 sec)

Posted by unboxingexp | Yesterday @ 11:47 AM | 1,817 Views
Tinywhoop with micro HD camera (1 min 31 sec)

This is probably the cheapest way to get hd footage from your tiny whoop. I installed a 5$ sq11 camera on top. In order to save weight I decased it. Quality of the footage is still mediocre.
Posted by DutchRC | Yesterday @ 11:12 AM | 1,944 Views
Halloa peoples

Sooo yes you probably know the T-Motor brand and there is a good change you use, or have used them (cause they also OEM for other brands).. But T-Motor has a reputation of making slightly more expensive motors probably?
Recently however they released some Budget motors (Velox) and mid-range (Pacer) motors In the video I review the last ones after doing at least 100 flights with them..

The motors: T-Motor Pacer P2207.5 (4S and 6S versions available) drone motors

For my tests with these motors I used CNHL 1100mah 6S Black Series lipo's.. I would hereby like to appologize to those lipo's :P

T-Motor Value Motors? The Pacer P2207.5 (1950KV) REVIEW (24 min 44 sec)

Posted by alex_nikiforov | Jun 03, 2020 @ 11:08 PM | 2,935 Views
Foxeer Razer Nano 1200TVL 1/3 CMOS Low Latency FPV Camera 4:3/16:9 PAL/NTSC Optional For RC Racer Drone

Foxeer Razer Nano. Бюджетная нано камера за $17.99 (4 min 55 sec)

Link: Foxeer Razer Nano
Posted by simages | Jun 03, 2020 @ 09:51 PM | 3,132 Views
This has been way over due for me.......

Have always planned to finish this into a NASA Cobra AH-1G. I'm sure it will take a little time.....

Build Thread HERE
Posted by old4570 | Jun 03, 2020 @ 09:32 PM | 3,077 Views

Took my FMS 800 V-tail out for a spin .
Just recently flashed OpenTx 2.3.7 , so looks like trims were a little . Or maybe it was that last time I flew the V-tail it was windy ?
Either way ..

Elevator a little touchy , Ailerons a little soft ..
Still , I really like this one . I should fly it more .

Ezio 800 prop VS HK folding prop (2 min 1 sec)

I am running a HK folding prop on mine ..
Posted by BDOG1 | Jun 03, 2020 @ 04:31 PM | 3,576 Views
I got a chance to duck out and do some sloping today.
The forecast only called for a 1 hr window of the correct direction wind,I have wanted to get out with my 3m Crystal to see if she flew as well on the slope as she had for her maiden "flat land " outing .
Please see below :
Posted by J Morgan | Jun 03, 2020 @ 04:27 PM | 3,615 Views
While I am attempting to sharpen up my old rusty piloting skills in order to maiden the SE-5a and Fokker DVIII, moving on with a larger build
of the Vindicator.
This will be a very light weight build hopefully. Details in the build log here:

Posted by jmxp69 | Jun 03, 2020 @ 03:07 PM | 3,915 Views
This is the first look at the ToolkitRC WM150 Watt Meter
ToolkitRC WM150 Watt Meter First Look (9 min 42 sec)