Posted by RC Roundtable | Today @ 04:28 PM | 149 Views
Episode 105: "Executive Blunder" is now live!

In this episode, the AMA's Tyler Dobbs tells us about a proposed executive order that could impact our hobby:
-Tyler spills the beans (1:00)
-The gang assesses things (18:30)
-Virus purchase (39:35)

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.
We would love to read your comments and ideas. Please drop us a line here, on twitter, or via email: [email protected].

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us an email: [email protected].
Posted by Hibbertjayy | Today @ 12:44 PM | 687 Views
How do i reattach antenna to receiver ? Its snapped at the solder point. I have soldered it back , messily as im a beginner , but its definitely connected.

I read a thread on here and i quote ''configuration .. is critical'' so is there a specific way ? All wires look the same in the casing theyre jus thin copper ones , about 5 or 6 of em.
Posted by racedouge1 | Today @ 10:43 AM | 906 Views
Saw an interesting way of hot wiring a wing from a Jim Thompson's video. He hot glues down foam sheets to hot wire ribs, then skins them with fiberglass sheets.
So I thought. I want to try to do something like this. When RC Foam sold out I bought a lot of boxes of Depron. I want to start with a small light weight flying wing (of course) with a Spekrum UMX brick. The wing skins will be 1mm Depron. Has anyone have experienced thinning out BSI Foam-Cure with denatured alcohol.

Now to start on templates.
Posted by modelworks | Today @ 10:16 AM | 999 Views
I have a passion for Large Aircraft models. They say that size does not matter. Ohhh yes it does. Go Big or Go home is what I say to that. You are either going ALL THE WAY, or not at all. I like Fighter Jets and Helicopters. Just something about the shape and form. This is my first post. Not really sure how to add the photos. Hopefully they come out okay.


Posted by jmxp69 | Today @ 08:38 AM | 1,237 Views
Florida is shutting down. I got one last video in before the quarantine went into effect. Good tuning results on the vanquish.

Extreme Flight Vanquish MKII F3A 2nd Flight - Last Flight before Covid-19 Quarantine Order. (25 min 6 sec)

Posted by Carmen Chen | Today @ 04:43 AM | 1,788 Views
*Multifunction,Suitable for a variety of occasions:
1.Halloween or other festive prank toys / gifts
2.Simulation animal decoration for zoo / park
3.Indoor or outdoor remote control toy boat for kids
4.Remove the boat and turn it into a crocodile model
5.Drive the ducks and protect the aquatic plants
6.Protect your private pool from the pollution of birds

*Product details:
Product Name: Flytec V008 RC Crocodile Boat
Frequency: 2.4GHZ
Control Time: 15 Mins
Charging Time: 4-5 Hours
Control Distance: 30 M
Battery: 3.7V 500MAH
Speed: 15 KM/h

1.2.4GHz remote control, the remote control distance is farther, and many people use it without interference.
2. Resin simulation of the crocodile head, the shape is realistic.
3. Forward, backward,turn left and turn right four-channel operation, which simulates the speed and movement of the real crocodile, and moves freely on the water.
4. Low-voltage protection, when the voltage is too low, the speed will automatically drop by 40%, reminding consumers to recall the remote-controlled boat
5. The water-inducing paddle shaft is in contact with the water surface. After the fluid is sensed, the power can be quickly turned on. At the same time, the balanced double-coil slurry is used to make the speedboat sail more smoothly and without fear of overturning.
6. Waterproof performance is good, the charging port is equipped with rubber waterproof plug, the bottom of the boat is fully enclosed and...Continue Reading
Posted by old4570 | Yesterday @ 09:46 PM | 2,647 Views
Purple Crash Monster DLG (4 min 46 sec)

Remember the purple DLG ?

Been trying to untwist the wing (?)
Still turns left , but at least I can tune it out some what .

Wow , Not great ! Hopefully I can get it to do something in the future ..
Needs a lot of work ..

But I am getting some where , I guess ?

I just dropped a bundle on a DLG ,
1 meter fits me better than 1.5 meter .
Now for a decent 750 or smaller DLG
Posted by nd244 | Yesterday @ 09:41 PM | 2,667 Views
Hi there. I get a bunch of planes from someone I want to start out to fly this plane. This plane is the best plane in its condition I donít know if it has everything that it needs to fly. I put a picture of the electronics I was wondering if there is anything else I would need to fly it. I will need batteries and I will need a remote for it if you can help me with that to figure out what I need. i have photos of the inside of the airplane it won't let me upload it so contact me if you are willing to help. [email protected]
Posted by MozzyFoxyote | Yesterday @ 09:34 PM | 2,684 Views
This is my mini-project that I just started early this year. But since we're shut inside with COVID-19, I've finally made a return to the project after some 7 years, haha.

This is a Traxxas Stampede 2WD with the Traxxas brushless system. The shocks are (I think) Axial, I got them very long ago from a friend. The cage/body panels are off a Vaterra Twin Hammers that I custom painted. The wheels & tires are also Vaterra, not sure of the model names.

I have some aluminum set aside to make a new hood panel, but thanks to this pandemic right now, the weld school I'm at is completely shut down, so I'll have to make those later. Other than that, I'd like to either buy or make a wing, and get some new oil in the shocks.
Posted by BDOG1 | Yesterday @ 08:55 PM | 2,748 Views
April first 2020 and a chance to get outside into the sunshine with a predicted 10mph wind from the north.
I have not tried to fly this direction with wind this light ,but out I went..full sunshine and a balmy 46 degrees ..

I flew the Bug first,I had built a couple of them a half a dozen years ago and had not flown them on a real hill, just tossed them around sloping hay bales a in a friends field .

The wind felt stronger than the predicted 10 , I was still using my transmitter glove { was glad I did, when clouds passed over , my hands were toasty warm inside }
Since I had not flown this in ages and was now on a new transmitter {This is a rudder/ elevator ship,and I fly rudder on the left stick } Do I launch with my left hand and keep my finger on the elevator stick .
Or launch with my right hand and have my finger on the rudder stick.
I launched with my left betting on needing elevator control first,as it turned out the elevator was not too far off and the wind turned her before I could get my left hand inside the glove...she set down with out damage about 20 feet away {shows why I am not a gambling man }
Next launch with my{ right hand } was no problem,flew her around and trimmed her out ,seemed a little tail heavy with a bit of a tuck once so I ,landed and added some lead to the nose .
Out again and tooled around for the next 20 minutes - Great fun , something this light shouldn't be able to handle this much wind

Time for the HK 1M dlg,I had...Continue Reading
Posted by DismayingObservation | Yesterday @ 08:46 PM | 2,764 Views
I simply could not resist.

Yes, I already have several nano sized quads. However, thanks to Harbor Freight's frequent 20% discount offers, I was able to score their new Pocket Air Drone for well under twenty bucks.

It's an RTF - naturally - in the mold of such predecessors as the Cheerson CX-10.

And boy, is this thing fun. If one's local hobby shop doesn't stock nano quads for these strange times of isolation, I can't recommend this highly enough. It's not only a kick to fly, it's downright fast. It's just the thing for blasting about the living room for practically pocket change. Three control levels, automatic flips, spare props, what more can one ask?

Well, a slightly less sensitive throttle control might be nice. Other than that, not much else.

I'm reminded of a $20 toy helicopter with IR control I bought at a San Diego convenience store as a blog subject. Fun but difficult to fly and it eventually fell apart. I got my money's worth for sure.

That same twenty bucks nets a really nice little machine complete with Harbor Freight's 90-day guarantee.

It might be time to dust off some of those other nano quads of mine, but for now, I plan to put a lot of flights on this thing.
Posted by buudy22 | Yesterday @ 07:29 PM | 2,851 Views

Like many of you, I have been captivated with RC flying since my childhood. I remember the first time a local club president let me fly control line for the first time. Spinning in a circle, it felt like that little airplane was never going to run our of fuel. The summer I turned 14 I got my first job stocking shelves. My only goal: buy my own nitro powered airplane. The old 4 channel Futaba radio alone cost me $169. I must have looked at it 20 x's while I piled up the money to buy it. It took me all summer, but I was in the air after $600.

Fast forward to today and I am just as hooked as I was 30 years ago chasing that plane in a circle. Many of us have watched the hobby change a lot, I am still amazed at how fast fpv drone racing changes and develops.

I've been satisfied with the machines I've had for a while, but decided it was time to upgrade: a set of new skyzone c02's and a new quad from hobbycool and I was back to stunned with what tech has been developed. OSD, 6s batteries, screws in the bottom of motors instead of those awful c-clips?
What have I been missing????

Here was my quad of choice when upgrading:

Shipping took about 2 weeks for the quad and goggles from hobbycool and 4 weeks for my flysky receivers from eBay. what toruture!

Finally got the bird in the air...and the results were amazing!!!

Ive crashed many times and still laugh when it happens...but to dump this in as hard as I did on not have any damage...incredible!

If it's been a while since you've upgraded, it's time!

Here is my video review (below). Bring on summer!

Flash (Hobbymate) - 6s 5" fpv race quad review and crash (11 min 11 sec)

Posted by AirX | Yesterday @ 04:30 PM | 3,242 Views
To be Continued....
Posted by Bob Gaito | Yesterday @ 02:23 PM | 3,528 Views
Here's a copy of a reproduced Titanic boarding Pass-for all you White Star fans...
Posted by tallflyer | Yesterday @ 01:31 PM | 3,642 Views
First off I want to thank everyone on the RCGroups for all the amazing years of love and support I started as a way to just give back and offer free content to my fellow RC friends. times have changed and now with social media and so many more ways to get my message out, will shut down as soon as my hosting company pulls the plug.

Free Plans are still online if you can't find them send me an email at [email protected]

Don't cry you can still find me on social media

My New Online name is TallguysRC


And on youtube
Posted by unboxingexp | Yesterday @ 11:01 AM | 4,094 Views
Very happy with the weight and video quality of this Caddx Firefly FPV set. It's well suited for small builds like tinywhoops. I ve installed it on my 65mm brushless drone. Check it out!
Caddx firefly FPV camera and VTX (1 min 11 sec)

Posted by Fitz Walker | Yesterday @ 09:44 AM | 4,333 Views
Check out my flight review of the H9 15cc sized F6F Hellcat
Hangar 9 F6F Hellcat 15cc Flight Review - Nice Kitty | HobbyView (8 min 29 sec)

Posted by klang | Yesterday @ 09:41 AM | 4,312 Views
This was a second or third hand kit from I was led to believe it was a Yak. I think someone mixed up a couple of kits and I was left trying to figure out how and what it would end up as. The original canopy was a vacuum formed lexan from a Yak and the fuse was definitely that of a Mig 3. I used a block of EPP to fill in the empty place where a clear canopy should have been. The tail feathers were originally coroplast, much nicer in balsa!