Posted by GroundControlRC | Oct 17, 2019 @ 08:32 AM | 1,744 Views

Tip #30 - CrazyBee Flight Controller Rebooting Issue Fix!

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #Mobula7 #CrazyBee

Here is a link to the Video:

I had an issue with my Brand New Mobula 7 Power Whoop which has a CrazyBee Flight Controller.
The Flight Controller would reboot during flight about every 10-15 seconds.
This fix took care of this issue ;-)

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Here are links to this Flight Controller, Power Whoop, Spare Parts, Upgrade Parts, & LIPOs:

Happymodel Crazybee F4 Pro V2.0 Mobula7 HD 1-3S Flight Controller w/ 5A ESC & Compatible Flysky/Frsky/DSMX Receiver

Happymodel Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop (***Select Receiver Type YOU need!)

Happymodel 3.8V 300mAh 30C 1-2S Lipo Battery PH2.0 Plug for Mobula7 Snapper6/7/8 UR65 US65 UK65

10Pcs URUAV 3.8V 300mAh 40/80C 1S HV 4.35V PH2.0 Lipo Battery

10Pcs URUAV 3.8V 300Mah 40/80C 1S HV 4.35V Lipo Battery PH2.0 Plug for Eachine TRASHCAN Snapper6 7 Mobula7

Happymodel Mobula7 Part 40mm 1.0mm Hole 4-Blade...Continue Reading
Posted by RADIOLINKRC | Oct 17, 2019 @ 07:02 AM | 1,789 Views
Hiiiiii friends!

RadioLink has recently launched a new aircraft, fixed wing A560 and is now inviting all RC fans who are interested in fixed wing to make reviews.

Features of A560
  • The exclusive and expertly tuned flight controller algorithm makes A560 possible to flight even in limited space including indoors
  • Handy enough for beginners with specially developed flight controller but enjoyable with free styles for fixed wing experts
  • Compact size (560mm of wingspan), super lightweight (139.5g) and extremely durable PP foam airframe
  • Factory-installed flight controller, servos and power systems with approximate assembly time of less than 10mins
  • Super-simple transmitter setup- no complex programming required
  • Powerful brushless motors compatible with 2S 660mAh batteries with flight time of more than 10mins
  • Completion Level: Bind-N-Fly
  • Minimum Required Radio: all R/C supported with SBUS/PPM signals

Click to know more about A560.

A560 Flight with Single Hand (2 min 45 sec)

A560 Vertical Flight (0 min 44 sec)
...Continue Reading
Posted by Qwinout | Oct 17, 2019 @ 04:46 AM | 1,831 Views
Jumper T16 Pro Hall Gimbal Open Source Built-in Module Multi-protocol Radio Transmitter 2.4G 16CH 4.3" LCD

Mode 1 = right hand throttle

Mode 2 = left hand throttle

The T16 Pro version does indeed support Crossfire and in CRSF mode with LUA script support and most importabtly users could use JP4in1 and CRSF a same time.If you are looking for the most compact, most afforabe and most EPIC Crossfire compatible TXin the market today look no further than the Jumper T16 Pro.

Jumper T16 Pro features:
Gimbal Type: HALL SENSOR
Built-in Multi-protocol Module
Removable battery
Supports Telemetry
Memory 16M (can be expanded by Micro SD card)
Voice function
Vibration reminder function
Standard JR module slot
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Two-color LED status display
Wheel menu button
Compatible with JumperTX (An independent fork of OpenTX)
Industrial grade 4.3 inch 480*272 outdoor readable color screen
Posted by Qwinout | Oct 17, 2019 @ 04:38 AM | 1,750 Views

18 is the Lucky Number of
So from today on,we will offer a surprise for each number End with 18,for example, the order number.
QwinOut1518 will receive a Jumper T16 Pro as free gift
Posted by visioneer_one | Oct 17, 2019 @ 01:58 AM | 1,898 Views
Responded to the OP. Placed my order on Monday, received it today (Wednesday.) I'm currently stateside, so shipping was delightfully quick!

...Continue Reading
Posted by Montanaman2 | Oct 17, 2019 @ 01:24 AM | 1,756 Views
If you have it contact me
Posted by Hobby Details | Oct 16, 2019 @ 09:10 PM | 1,846 Views
Premium Allen Wrench Set - Breakstone Honeycomb 4pcs
DTT02012 Hex1.5 x 180mm
DTT02013 Hex2.0 x 180mm
DTT02014 Hex2.5 x 180mm
DTT02015 Hex3.0 x 180mm
Titanium Tips

Optional to change to with SAE(Inch) Hex or Ball Head Tips, same price
Wholesale Price please PM or contact me at: [email protected]
Posted by JureZ | Oct 16, 2019 @ 01:19 PM | 1,702 Views
GWS F-15 , built as pusher with an outrunner motor at the tail , split elevators and ailerons , belly lander .

AUW is 948g or 33.44 oz. Motor is from the Freewing Moray : 3040 , Kv = 1400 , weight = 114 gram ,

8*6 MAS S2 propeller , and 3S 2200 mAh LiPo battery. Static current is 19A full throttle.

After years in the attic, finally saw the light of day , and got a maiden flight ! great success !

GWS F-15 Eagle - Movie (2 min 8 sec)

Posted by nigelsheffield | Oct 16, 2019 @ 12:14 PM | 1,743 Views
Links in the description for bikes mentioned and the phone holder which is good to have for any bike as it will not only hold the phone so you can use it for GPS computer and sat have etc but carry a power bank in there to save the battery.
Discount codes in there too.
What a great way to explore the area this is and I've found lots of interesting places in Yorkshire to fly my quads ( once the weather gives me a chance and stops RAINING )
400 mile 4 week update on the $500 Fiido d3s electric"folding" bike ebike and mods. (7 min 30 sec)

Posted by JohnVH | Oct 16, 2019 @ 11:40 AM | 1,576 Views
Another great flight on the 94.5" HKing Navy cub at the BellairRCFlyers Warbird event. More info in the video description on YT.
H-King 94.5" Navy Piper J-3 Cub 2400mm from HobbyKing BellairRC Event Flight!! (4 min 29 sec)

Posted by UnknownForces RC | Oct 16, 2019 @ 11:28 AM | 1,455 Views
GR1 4WD Gear Modulus 1.5 (0 min 16 sec)

GR1 4WD gears, machined teeth, higher strength and precision,more durable, gear modulus 1.5.

Our gears always run in dual ball bearings to reduce radial runout. We also strive for larger dimension bearings wherever possible to increase their load carrying capabilities for longer life and reduced maintenance. We are not just making products, we care for every detail.
Posted by CluelessSeller | Oct 16, 2019 @ 10:46 AM | 1,430 Views
Might anyone be interested in making an offer on this lot of OK Cub parts? I count 165 envelopes, however some envelopes have several envelopes inside. Thanks!

Posted by mr.kmit | Oct 16, 2019 @ 09:21 AM | 1,260 Views
MFD Crosswind mini (8 min 5 sec)

Posted by GLSJr | Oct 16, 2019 @ 09:11 AM | 1,245 Views
I'm just starting to acquire an assortment of various connectors. I want to switch all my battery connectors to XT150's. I was perusing You Tube and ran across a guy who was talking about them, and the problems he had with the connectors he had bought from different suppliers. Specifically Hobby King and Amazon. I buy all my connectors (Deans, XT60, bullets) from Amazon, but not the XT150 yet. Since Amazon cites their sources, I kind of feel like maybe I can avoid a knock-off and grade B quality. For instance, the shield around the bullets is quite flexible (and a different color) from Hobby King. But he also said that the male bullets extended beyond its shield from Amazon (Amass). Where do you guys get quality connectors?
Posted by Merch | Oct 16, 2019 @ 08:01 AM | 1,333 Views
Eachine Mini Mustang P-51D EPP 400mm Wingspan 2.4G 6-Axis Gyro RC Airplane Trainer Fixed Wing RTF One Key Return for Beginner

One on the way for review

Brand: Eachine
Product Name: Mini Mustang P-51D (Wild Horse)
Version: RTF Gyro (whole set to fly with gyroscope)
Material: EPP
Wingspan: 400 mm (15.75 inches)
Length: 317 mm (12.48 inches)
Motor: 10mm coreless motor (hollow cup)
Receiver: 2 in 1 integrated board
Servo: 2g plastic gear *3
Propeller: 13X7
Flying weight: 60g
Recommended battery: 3.7V-360MAH
Package size (length x width x height): 35X35*15.5cm
Flight time: 14mins
Charging time: 2.5 hours

Package included:
1 x Eachine Mini Mustang P-51D EPP 400mm Wingspan 2.4G RC Airplane Fixed Wing RTF...Continue Reading
Posted by FeiJi | Oct 16, 2019 @ 01:33 AM | 1,216 Views
Cut up a perfect new Lighting EPP wing kit into 3 pieces for portability and to carry on my ebike. Was an experiment that worked out pretty well. Kit cost me about $20 so no loss if I failed. The wings are now very stiff, the new wing is lighter than my old one which I had embedded LEDs. I hold the wings together with a couple zip ties. Takes about 5 minutes to assemble it at the field.
All up weight with 64gram 800mah lipo is about 330grams. That includes metal spinner on folding props and a bigger 15amp ESC. The old wing really flaps its wings on a windy day but this wing is very rigid. CG is at 10cm from leading edge. I don't know how anyone can fly with it at the recommended 50mm. Perhaps it is 3D at that point and I can't fly 3D. It is powerful enough with a 3S lipo to move out pretty quick. I fly around at about 40% throttle.

My maiden went ok but on the third flight the battery dropped out the bottom and I flew it down to a landing without any harm. Looked pretty funny flying with the battery hanging below by the wires. Guess that is the inevitable hazard with the battery hatch being on the bottom of the fuselage.
The video is kind of long and drawn out and out of frame sometimes. Maiden plus one flight is at the end. My wife kindly videoed but in portrait mode. I was training her to video my flights but she has already lost interest so will have to self video in future flights.

Very happy with how this wing turned out. I fly at a large university football field and it is perfect for that size field.

Backpackable Lighting EPP Wing (13 min 42 sec)

Posted by phyngineer | Oct 15, 2019 @ 10:32 PM | 1,293 Views
At 9:15 on October 15th, in the Haicheng Park of Hangzhou Future Science and Technology City, a drone quickly took off and then flew away. It has 4 cups of freshly brewed coffee in the "belly" and flies to the future research and development park 3 kilometers away to send "Express". Next, the drone distribution area will gradually expand from the test scene of Hangzhou Future Science City to the whole city of Hangzhou.
On the same day, the Civil Aviation Administration of China issued the "Special Class of UAV Test Operation Approval Letter" and the "Unmanned Aerial Vehicle Logistics Distribution Operation Permit" to Hangzhou Send Bar Logistics Technology Co., Ltd. This is the first “license” for the pilot operation of a certain type of urban scene for UAVs issued by the Civil Aviation Administration of China. Yin Shijun, chief engineer of the Civil Aviation Administration of China, said that the issuance of this license is a milestone in the field of unmanned aviation in China.
Send Bar Logistics is a subsidiary of Hangzhou Xun Ant Network Technology Co., Ltd. The ant established in 2015 has grown into a key enterprise in the domestic commercial drone field. Before being granted the operation permit, “Xun Ant” has completed more than 20,000 logistics operation scenario test flights in the test area of ​​Hangzhou City and Huzhou Anji and other mountainous areas, and passed the specific operational risk assessment...Continue Reading
Posted by Hobby Details | Oct 15, 2019 @ 08:37 PM | 1,230 Views
Aluminum Rear Lower Arm Set
For TT02
DTOR01006A: Red
DTOR01006B: Blue
Wholesale Price please PM or contact me at: [email protected]