UnknownForces RC's blog View Details
Posted by UnknownForces RC | Today @ 02:00 AM | 1,136 Views
Desert buggy design body panels made of clear polycarbonate.
Posted by UnknownForces RC | Today @ 01:24 AM | 1,139 Views
Driveline parts (drive shafts and cups, gears) and turnbuckles made of chrome-moly steel.
Posted by UnknownForces RC | Today @ 01:17 AM | 1,154 Views
Very smooth and quiet running transmission with longitudinally mounted motor. Completely encapsulated, no exposed gears. The UFRC Growler GX1 is almost as quiet as a small 1/10th scale car! This is particularly due to the spiral cut bevel gears and helical cut spur gears. The positive connection of the gears on the intermediate shaft is designed as a profiled shaft based on the cycloids of higher level.
Posted by UnknownForces RC | Yesterday @ 03:27 AM | 1,395 Views
(Left Losi right UFRC)
The huge spindles at the front suspension fill the rims almost completely and guarantee high load capacity. The joint balls in the a-arms have a diameter of 15 mm (FG uses only 10 mm for the same vehicle size).

Front and rear spindles/uprights prepared for installation of in-wheel brakes.
Posted by UnknownForces RC | Yesterday @ 03:06 AM | 489 Views
Drive shafts with wheel-side CVD joint as in Losi 5ive vehicles. The drive pin on the diff side is also replaceable and has a diameter of 6 mm!
Posted by UnknownForces RC | Yesterday @ 03:02 AM | 347 Views
Differential cup made of cold extruded aluminum, no fragile cast part!
Posted by UnknownForces RC | Yesterday @ 02:48 AM | 348 Views
Large-volume shock absorbers with oversized 8 mm piston rods.
Posted by UnknownForces RC | Sep 12, 2019 @ 04:32 AM | 457 Views
The UFRC Growler GX1 has metal thread inserts in the plastic parts at high-stress mounting points.
Posted by UnknownForces RC | Sep 12, 2019 @ 04:28 AM | 461 Views
Aluminum skid plate/chassis reinforcement for the front axle as standard. Steel reinforcement plate for the chassis in the servo saver area as standard.
Posted by UnknownForces RC | Sep 12, 2019 @ 02:59 AM | 464 Views
Front suspension with ball-raced balance beam for the shocks (can also be locked if required) for running on very uneven terrain.
Posted by UnknownForces RC | Sep 12, 2019 @ 02:57 AM | 466 Views
Machined connecting plates for the hinge pins with exchangeable plastic inserts as standard.
Posted by UnknownForces RC | Sep 12, 2019 @ 02:56 AM | 422 Views
Bent and milled tub chassis made of 5 mm thick aluminum for extreme rigidity.
Posted by UnknownForces RC | Sep 06, 2019 @ 04:00 AM | 1,145 Views
4WD solid rear axle, take split structure for easy maintenance.
Posted by UnknownForces RC | Sep 03, 2019 @ 04:50 AM | 653 Views
Includes: Headlights, searchlight, fog lights, front and rear turn signals, high-frequency tail lights, brake lights.
Posted by UnknownForces RC | Sep 02, 2019 @ 10:11 PM | 736 Views
The LSD Lock of GR1 4WD SOLID REAR AXLE TRUCK.
Posted by UnknownForces RC | Sep 02, 2019 @ 02:47 AM | 1,031 Views
Modular design, compact and logical layout , maximizing interior spacing.
Posted by UnknownForces RC | Sep 02, 2019 @ 02:45 AM | 959 Views
GR1 1:5 4WD REAR AXLE TRUCK (0 min 42 sec)


The gear system is scientifically calculated and rationally designed. greatly reduce the motor, ESC load, and improve the stability of electronic equipment.
Posted by UnknownForces RC | Sep 02, 2019 @ 02:43 AM | 847 Views
Fully enclosed receiver box, provide better protection towards water and muddy conditions.
Posted by UnknownForces RC | Aug 28, 2019 @ 02:26 AM | 710 Views
With a U-shape design chassis, the structural strength are much stronger, at the same time protect the batteries box from side impact.
Posted by UnknownForces RC | Aug 27, 2019 @ 04:57 AM | 1,886 Views
Full roll-cage design, greatly improve protection and durability.