cuavlindy's blog View Details
Archive for May, 2018
Posted by cuavlindy | May 30, 2018 @ 02:45 AM | 2,109 Views
Today our technician testing for C-RTK testing , welcome to check it

C RTK TESTING (1 min 57 sec)



more details can check as below:

https://www.aliexpress.com/store/pro...78562fadnkJTKG
Posted by cuavlindy | May 29, 2018 @ 01:52 AM | 3,150 Views
About CUAV Pixhack V5

CUAV from Guangzhou, China, has newly developed a new Pix codenamed V5. It will start a global public test recently. The following are known materials:

http://doc.cuav.net/flight-controller/pixhack-v5/en/


Quick Summary
Main FMU Processor: STM32F765◦32 Bit Arm Cortex-M7, 216MHz, 2MB memory, 512KB RAM

IO Processor: STM32F100◦32 Bit Arm Cortex-M3, 24MHz, 8KB SRAM

On-board sensors:
◦Accel/Gyro: ICM-20689
◦Accel/Gyro: BMI055
◦Magnetometer: IST8310
◦Barometer: MS5611

Interfaces:
◦8-14 PWM outputs (6 from IO, 8 from FMU)
◦3 dedicated PWM/Capture inputs on FMU
◦Dedicated R/C input for CPPM
◦Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input
◦Dedicated S.Bus servo output
◦5 general purpose serial ports
◦4 I2C ports
◦4 SPI buses
◦Up to 2 CANBuses for dual CAN with serial ESC
◦Analog inputs for voltage / current of 2 batteries

Power System:◦Power: 4.3~5.4V
◦USB Input: 4.75~5.25V
◦Servo Rail Input: 0~36V

Weight and Dimensions:◦Weight: 90g
◦Dimensions: 44x84x12mm

Other Characteristics:◦Operating temperature: -20 ~ 80c

It is known to use the F765 processor and many other upgrade updates. But I dont know if the current Ardupilot firmware supports it or not. Im going to use a traditional helicopter to test this flight control. I need to ask whether AC 3.6rc1 FW supports this.

Web:https://leixun.aliexpress.com
Posted by cuavlindy | May 25, 2018 @ 04:29 AM | 1,912 Views
hi dear friend ,

we just want to know , how many friends use our pixhack V3?

if you use , just let us know what do you think ?

we will sent to you some free Big coupons



Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Tel: 13570272379
Wechat:0086-13570272379
E-mail :[email protected]
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/
Posted by cuavlindy | May 03, 2018 @ 11:50 PM | 3,162 Views
here is our one customers review for our pixhack V3 for your checking


CUAV V3 Unboxing / Disassembly / Review (6 min 16 sec)



Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Wechat:0086-13570272379
E-mail :[email protected]
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/