RADIOLINKRC's blog View Details
Posted by RADIOLINKRC | Aug 19, 2019 @ 09:52 PM | 515 Views
Our latest launched T8S is READY TO ROCK !

With the super light weight of 142g , T8S has the brilliant communication performance as excellent as AT9S and AT10II and is perfectly handy for all kinds of models including Fixed Wing, Gliders, Multicopter, Cars and Boats.
  1. 2000m of Control Distance in air(with Radiolink R8EF receiver)
  2. Parameters Setup with Android APP
  3. SBUS/PPM/PWM Signal Output Supported
  4. Adapts to Multiple Models(Plane/Racing drone/Rc car/Rc boat )
  5. Programmable Mix Control
  6. Ergonomical Design with Small Dimension (162.5*95.5*57mm)
Follow our AliExpress Official, screenshot and contact the seller, you will get a $2 coupon for T8S !
https://www.aliexpress.com/item/33052706044.html…

More details please visit http://www.radiolink.com.cn/doce/pro...etail-150.html

Posted by RADIOLINKRC | Aug 13, 2019 @ 05:38 AM | 798 Views
After downloading the parameter setup APP in the android phone and powering on T8FB, an OTG cable which is packed with the T8FB, is needed .

Make sure the SMALLER end of the OTG cable is connected with the phone while the BIGGER end with the android USB cable.

(See picture here attached)

Note OTG function in Android phone should be activated first: Settings - Other settings - OTG Connection

More details about setup steps, please refer to the T8FB instruction manual downloaded from http://radiolink.com.cn/doce/UploadF...T8FBManual.pdf
Posted by RADIOLINKRC | Aug 05, 2019 @ 05:49 AM | 1,629 Views
If you have the RadioLInk old products (RC3S/RC4G/RC4GS produced before 2018/RC6GS two-way switch version/T4EU/T4EU-6/T6EHP-E/T6EHP-S/T7F/T8FB without USB port, you are very welcome to join this #OLDTONEW.
That is, you can get a new replacement in a SUPER LOW price WITHOUT shipping the old ones back to us.
Yessss!! Just keep the old RadioLink product and have a brand new one!!!

All you need is to follow the below steps:
1/ Follow our RadioLink Facebook homepage https://www.facebook.com/Radiolink-1455452961436694/
& AliExpress Official 👉https://www.aliexpress.com/store/4714037
2/ Send a mail to [email protected] , including all necessary infos

Please click below links to have more details

T8FB http://radiolink.com.cn/doce/oldtonewt8fb.html
RC4GS/RC6GS http://radiolink.com.cn/doce/oldtonewrc4gs.html

Once we get your mail and all infos are verified, we will send you a link to place order.

Period: Till August 31

Feel free to send mails to [email protected] if you have any questions.
Posted by RADIOLINKRC | Jul 25, 2019 @ 01:08 AM | 2,547 Views
1.Plug in the proper battery first
2.Press “END” on the left and “Push” on the right and power on simultaneously (00:00:29)
3.Enter the stick Calibration menu

4.Calibrate each channel one by one
5.CH1
CH1UP
* Press “End” to empty the data value
* Push Rudder stick to the LEFT and the value will change to minimum
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH1CT
* Press “End” to empty the data value
* Toggle the Rudder stick at the center point
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH1DN
* Press “End” to empty the data value
* Push Rudder stick to RIGHT
* Press “MODE” to confirm and there will be [OK] shown on the screen
6.CH2:
CH2UP
* Press “End” to empty the data
* Push Rudder stick to UPWARD
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH2CT
* Press “End” to empty the data
* Toggle the Rudder stick
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH2DN
* Press “End” to empty the data
* Push Rudder stick to DOWNWARD
* Press “MODE” to confirm and there will be [OK] shown on the screen
7.CH3:
CH3UP
* Press “End” to empty the data
* Push Throttle stick to UPWARD
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH3CT
* Press “End” to empty the data
* Move the Throttle stick to center point
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH3DN
* Press “End” to empty the...Continue Reading
Posted by RADIOLINKRC | Jul 19, 2019 @ 05:33 AM | 1,874 Views
As we all know that RadioLink product family is getting larger, sometimes we may get confused about the compatibility of different radios and receivers.

Here is a short list and hope it makes more clear.
  • R7FG -- RC4GS(After 20180101),RC6GS(3-position switch),T8FB
  • R12DS -- AT9,AT9S,AT10,AT10II
  • R12DSM -- AT9,AT9S,AT10,AT10II
  • R9DS -- AT9,AT9S,AT10,AT10II
  • R6DS -- AT9,AT9S,AT10,AT10II
  • R6DSM -- AT9,AT9S,AT10,AT10II
  • R8EF -- T8FB,RC4GS,RC6GS
  • R8FM -- T8FB,RC4GS,RC6GS
  • R6F -- RC4G,RC3S,RC4GS,T8FB,RC6GS
  • R6FG -- RC4G,RC3S,RC4GS,T8FB,RC6GS

Please be kindly noted that RadioLink receivers are not compatible with transmitters of other brands. Vice versa.
Posted by RADIOLINKRC | Jul 11, 2019 @ 02:35 AM | 1,741 Views
Basing on the APM open source, RadioLink flight controller Mini Pix is developed with software algorithm of damping vibration and the hardware redesigned to achieve “Alt-hold at super low height” and “Stable flight at super high speed” so that Mini Pix is applicable to various of models including heli/fixed wing/multirotors/cars/boats and different fields such as transportation, agriculture, etc. As more and more overseas users have positive feedback about Mini Pix, the APM team approached us and we have provided them our hardware circuit and files in June, 2017. The APM team has developed the open source firmware basing on RadioLink Mini Pix hardware for the Mini Pix users.

Links about RadioLink Engineer RadiolinkW submitting Mini Pix files
https://github.com/ArduPilot/ardupil...s_QMC5883L.cpp
https://github.com/ArduPilot/ardupil...aro_LPS2XH.cpp


To flash firmware

If the RadioLink Mini Pix is used for development, it is advised to flash the APM open source firmware version 3.6.0 or above. If used for RC fun/building models, choose RadioLink firmware version downloaded in RadioLink Mission Planner. Comparing with the open source firmware, firmware developed by RadioLink has better stability with the software filter algorithm added.


A. Flash Open Source Firmware
Click to flash the firmware in the open source Mission Planner downloaded via:
http://firmware.ardupilot.org/Tools/...ner-latest.msi
B.Flash RadioLink Firmware
Click to flash the firmware in the Mission Planner specially developed by RadioLink downloaded via:
http://www.radiolink.com.cn/firmware...ner-latest.exe


All interface protocals of RadioLink Mini Pix are the same as the open source pix. Therefore, the parameter setup and usage are same as the open source pix.


1.Instruction Manual of RadioLInk Mini Pix
http://radiolink.com.cn/doce/UploadF...2261419097.pdf

2.Documents of Open source Pix:
http://ardupilot.org/copter/index.html