Posted by GBLynden | Yesterday @ 07:07 PM | 3,862 Views
This is my Unboxing of the Arrows RC Bigfoot 1300mm RTF With Vector Stabilization. It is very cool entry level STOL RC Plane with everything you need in the box!

Arrows RC Bigfoot 1300mm RTF With Vector Stabilization STOL RC Plane Unboxing (8 min 7 sec)

Here are my Review Notes:

- RTF kit with everything you need to get into the air
- Two different flight modes
- Plenty of power on 3S
- All-terrain tundra tires for multiple surfaces
- Excellent set of lights
- Flaps with nice deflection
- Great presence

- The tires are likely to bounce on pavement, especially for a beginner.

Link to RTF Arrows Bigfoot:

The link in this description is an affiliate link. It gives me a small commission on sales which helps support the channel and keep it independent.
Posted by Rockitglider | Yesterday @ 02:27 PM | 5,982 Views

I made it up to the hill after a long time of not going. I'm hoping to start a regular pattern of flying like I used to. I'm hoping everyone else will do it more too. Here's some shots from my new camera from Saturday, Joe, Paul, and Mike were there too, and the pics are of they're planes. The weather was nice not too hot, low humidity. I have also included a link to all the shots from Saturday with the Hawk and Egrets included. Reading
Posted by PittSpecial | Yesterday @ 12:02 PM | 6,616 Views
Just an amazing morning in Central Florida for an Amazing RC Model and it is a crying shame this model is discontinued.

After working on it throughout the night, replacing the Stock ESC to the Castle Creations Thunderbird 36-AMP ESC and touching up on the paint after filling in some void areas on the Foam, this morning I was able to maiden the model on my watch!

Performed just what I had expected after watching my buddy who had one a couple of years ago. It performed Cuban-8's, Hammer heads and some inverted flights. Of course this following Video shows the second (2nd) flight as the maiden was great as well it was recorded in just too low of light.

Oh, yes, the only reason that I changed out the Stock ESC was because it came with a Battery Connector that I just didn't have (Converter).

Okay, here is the Video:
E Flite P 51D Dallas Doll in GERMAN Captured Clothing 10-17-2021 (4 min 21 sec)

Posted by USKP01261 | Yesterday @ 10:01 AM | 6,790 Views
DESIGNER: Lee Renaud (Ray Hayes -2003 revision - Skybench Aerotech)
DATE: ~1976 (2000s revision)
WING SPAN (in): 106 (modified)
WING AREA (in^2): 968 (est)
AIRFOIL: Flat bottom 10% , max chord = 10 inch
LENGTH (in): 48.5
AUW (oz): 53.4
W/L(oz/sq-ft): 7.9
POWER: POWER: GliderDrive 840kV w/ 44mm HK aluminum spinner and graupner 11x6 prop.
NOTES: Mods: non-built-up empennage from extra Oly IIS kit, stretched wingspan, built w/o spoilers, wing cross members and riblets.
Posted by GonzoBorinquen | Oct 16, 2021 @ 02:03 PM | 9,671 Views
Have had this Saitta produced ME 163B model since 2014. Has more than 130 flites. Is one of my favorite models to fly. Its looks, flying procedure, takeoff, flite and landing is scale and very unique. It draws a lot of attention at the flying field.

Futaba 9C radio, Rabbit 100 Jet Central turbine. Very aereobatic and docile at the same time. Will have extended 7+ minute flights. # fuel tanks totalling 96 oz of fuel. I use diesel fuel which actually provides more punch than jet fuel even thou it weights some more.

Last flying session on Sept 2021. Video attached

EM 163 KOMET (6 min 17 sec)

Posted by nagas | Oct 16, 2021 @ 11:04 AM | 11,157 Views
I am in the mood for making videos!

Here is a new video for the Blue Thunder model that you can download here.

Blue Thunder On Patrol (1 min 19 sec)

Posted by fastmax | Oct 16, 2021 @ 09:10 AM | 12,293 Views
Finally finished printing my NBD Bee Vault. Body and lid are printed in Rainbow Silk and the Inserts are printed in Black Silk. There are numerous options for inserts, and I chose to go with the options for one brushed Whoop, and one brushless Whoop plus batteries, spare props etc. I love the design and the way the lid locks.

.stl files can be had here on My Mini Factory for anyone wanting to print one.
Posted by | Oct 16, 2021 @ 04:36 AM | 14,064 Views
HBX make some outstanding small scale brushless bashers but this is the first time they have never made a larger car until now. I've reviewed the HBX 901a which is a 1/12 scale brushless 4wd dirt truck. This is a bit more expensive than the popular HBX 16889a pro but the extra size and ground clearance makes it a lot more capable offroad. It has typically excellent durability and battery life with decent speed from the brushless 2845 motor.

Full review is here:



Posted by turbinefancy | Oct 16, 2021 @ 02:24 AM | 14,935 Views
Over the years, many fellow RC pilots have asked me where I get my pan & tilts. I assume many would like to fly scale HT FPV like I do, but commonly available P & T's all seem to have obvious faults. So for my 2021 new year resolution, I set out to develop and produce one to for sale that solves all the common faults. After much delay, I have achieved that goal!

Introducing Motionsic B.A.G. (BadAss Gimbal) - the most practical pan & tilt making head-tracking FPV easy!

Designed for use with DJI FPV Air Unit camera and FPV cameras 20mm width or smaller including Caddx Air Unit, Nebula Pro, Polar, etc. it fits easily under most RC plane canopies 40 wingspan and up. Can also be installed on RC cars, crawlers, boats, or copters for use with a head-tracker to give realistic in-cockpit visual experience.


Compact - fits under most RC plane canopies, needs only cylindrical space 40mm diameter, 50mm tall for full movement with the FPV camera

Easy to install - use included screws and nuts to affix camera and platform to plane in minutes

Smooth/precise movement - includes 2x all-metal gear, digital, premium ball-bearing servos made by Savx in Taiwan (compare with sh0257mg, $35 retail each)

Check six for bandits - custom servos allow the camera to pan 280 to see 360 (with camera field of view), tilt up 80 down 45

Easy to adjust camera height/level to scale pilot eye position by adding/removing foam pads and adjusting the tightness of individual screws on corners of the platform.

Dampens vibration - foam pads also dampen vibrations from runway or road surfaces to make the visual experience pleasantly smooth.

UV resistant frame - impregnated with anti-UV polymer so gimbal frame stays robust with prolonged sun exposure.

Shock resistant - built to withstand minor plane crashes and keep on working!

Patent pending, Made in Taiwan

* DJI FPV Air Unit/Camera not included

Available at

sample video showing smoothness of motion:

Mig-29 Jet Head Tracking FPV Aerobatics (5 min 28 sec)

Posted by PittSpecial | Oct 15, 2021 @ 09:15 PM | 17,082 Views
Hi guys!

Whats up?

Been a long time coming and I finally got a used one in German Captured Clothing.

Hey, as the saying goes, beggars can't be choosy!
Posted by djmoose | Oct 15, 2021 @ 03:43 PM | 19,315 Views
Here are flights #5 and #6 on the airframe. Getting all the kinks worked out. Sorry for the "boring" flights but I like to break them in nice and slow.

2 Quick flights and landings - Black Horse Gilmore 92" 60cc ARF - Electric - Dualsky GA6000 on 12S (7 min 37 sec)

Posted by PittSpecial | Oct 15, 2021 @ 02:46 PM | 19,864 Views
Hi guys!

Just came across this model at my RC Club and was able to maiden it with very good results.

It is heavy for sure with 12-Cells behind it. Wow!

Here's the Video:

Super Viper RC EDF Jet over Moon Port Modelers RC Club 10-15-2021 (3 min 7 sec)

Posted by thejetengine | Oct 15, 2021 @ 02:12 PM | 19,966 Views
Hello, my name is Necati, I have been dealing with Rc vehicles for 5 years. In recent years, I have been interested in the production of jet engines and spare parts and I opened a new shop for it. From now on, there will be jet engine spare parts production and on-demand accessory parts sales in my shop. These products include lubrication unit, bearings, turbines and everything else. Don't forget to follow us on social media.
Posted by PittSpecial | Oct 15, 2021 @ 01:41 PM | 20,342 Views

I can tell you that parts for these Park Zone (Horizon) RC Warbird models are getting really hard to get.

I was lucky, however, back in September, I was able to purchase via our Classifieds the landing gear set which included the Strut Covers as my model lost one.

I am so glad that I found this sale and quickly acted on it as now my Spitfire has both Strut Covers again!

If anyone has any parts PLEASE let me know!
Posted by Old_Pilot | Oct 15, 2021 @ 01:36 PM | 20,174 Views
Got the ailerons and elevator mounted and hinged....And she balances right where she is supposed to figure out color

Just ran the wing loading calc's.....48 oz all up over 6 sq ft of wing....8.0 oz/sq-ft......that's pretty light wing loading...very pleased......anything below 10 would have been acceptable
Posted by vperko | Oct 15, 2021 @ 02:04 AM | 25,114 Views
Here are the XPS Pics of the edf unit i have
Posted by RCWorks | Oct 14, 2021 @ 03:50 PM | 30,227 Views
We got hit on Sunday and 2 more came to town on Tuesday.

Storm Damage in Anadarko Oklahoma (1 min 33 sec)

Before it was over there were 1900 houses without power. We lost power when it first hit on Sunday, we got power back on Tuesday.

Anadarko power outage (1 min 40 sec)
...Continue Reading
Posted by GonzoBorinquen | Oct 14, 2021 @ 12:52 PM | 31,482 Views
Have had this Great Planes DR-1 since sometime around 2005. Has had many many flights and its body shows it. The Monokote is patch up with Monokote and USPS tape in many places.

The DR-1 still flies and does it very well. As a matter of fact this model does the most insane spins I have ever seen . I will start spinning it at an altitude of 300' and breakout of the spin at around 50'. The 250' spin treck takes around 10 - 15 seconds. The spin rate is awesome at about a revolution every half to 3/4 of a second. The angle very shallow, almost a flat spin.

The DR-1 is powered by a Saito 90 4 stroke with a 14X8 prop. It has a very nice sound to it and it idles at very low revolutions.

The Dr-1 is not an easy plane to fly thou. You have to be on top of it all thru the flight. It dislikes crosswinds and will track perfectly with wind not been more 25 degrees of the runway center. Surprisingly it is usually docile at landings even with its very narrow landing gear.

Just flew it last Wednesday 10/13/21 after a layover of around 2 years. Did have to work on the engine to loosen the throtte barrel that sticks with the old gummy castor oil. Otherwise, it started on the 1st try, adjusted high speed needle and idled perfectly.

Will do a restorer in the future not using monokote but silk span and sanding sealer. This will make look more real and high don't particulary like ironong on materials specially Monokote.

Will post once I start the restoration.