Posted by JohnVH | Nov 24, 2021 @ 10:58 AM | 11,870 Views
Posted by Tazkiller85 | Nov 24, 2021 @ 06:08 AM | 12,361 Views
🧐Yep Les Amis,
Vrai défaut ou "chipotage" ? J'ai en test en ce moment le nouveau module ELRS de BetaFPV, le Micro TX. Une évolution du Nano TX déjà performant, qui ajoute à cet émetteur, des LEDS, un écran LCD, un ventilateur, une alimentation XT30 et un format standard qui s'adapte à la plupart des radios. On relèvera quelques petits défauts (ou pas) sur ce nouvel appareil, qui seront certainement gommés par la suite. Une prise USB C un peu trop profonde, un joystick qui n'est en fait qu'un bouton et un souci de déconnexion lorsqu'on accède au menu par le boitier. Je ne suis personnellement pas dérangé par ces quelques détails qui ne sont pas assez gênants une fois qu'on le sait. En bref, si les perfs sont au RDV, à ce prix là, je ne peux que valider ce nouveau module.... Prenez soin de vous (et des autres) et merci à tous pour votre soutien .

ELRS Micro TX MODULE betaFPV - Review Test Démo - TIRAGE AU SORT ! (25 min 5 sec)


🧐NOTATAZ : A voir lors des prochains tests ...

Chez BETAFPV
- ELRS Micro TX BetaFPV : https://bit.ly/3DPHuCj
- ELRS Nano RX : https://bit.ly/3DmOlDk
- ELRS Lite RX : https://bit.ly/3HMBcWl
- ELRS Nano TX Module : https://bit.ly/2Wq46sI
- Adaptateur ELRS Nano TX (TX16S, Nirvana etc ... ) : https://bit.ly/3nSOHMI
Chez Banggood
- ELRS Micro TX : https://www.banggood.com/custlink/D3GdQvqOgr
- Chargeur conseillé pour lipos : https://www.banggood.com/custlink/3mvE6ivWS2
- D'autres Modules ELRS et RX...Continue Reading
Posted by kfd | Nov 24, 2021 @ 02:09 AM | 12,347 Views
Posted by old4570 | Nov 23, 2021 @ 06:29 PM | 9,847 Views
Micro Tundra crashed and broken (5 min 50 sec)


Wow , what's with the crashing ?
Almost like , flying skills deteriorated after 2 years of lock downs .

Yeah , MT .. I pushed my luck and broke it ..
But , it is reparable ..
Though I cant trust the way the wing mounts ( weak ) without the wing struts ( I broke the plastic ends that screw into the wing / model ) ..
So I will have to resort to old tech ... BBQ skewers and rubber bands for extra hold down power .
Micro Tundra will fly again ..


Posted by kopterheld | Nov 23, 2021 @ 10:23 AM | 9,587 Views
A 1024x768 OLED 42 degree FOV goggless with adjustable lenses, diopters. The quality of the Sony OLED display is very good. However, a TX receiver is required. Compatible with Rapidfire, TBS Fusion, Eachine Pro58, URUAV RX5808 EVO and many other modules. A 2S battery is required.

Video -
Xflip OLED FPV unter 180 EURO - ist die was wert? (4 min 12 sec)


XFlip - [CZ] EU Code: BGCE5645 - https://www.banggood.com/custlink/v3DRWGW0YR
+ Extra 5% off - VIP Exlusive Allowance
https://www.banggood.com/custlink/DvGRB13cSQ

URUAV RX5808EVO - https://www.banggood.com/custlink/vvDy5tnhgU
Eachine Li-ion Cell Battery Case
Code: BGEACHINE10 - https://www.banggood.com/custlink/K3DEi5Y27C

Eachine EV300O
Code: BG4999D8 - https://www.banggood.com/custlink/vK3dd7hgt7

SKYZONE SKY04X - https://s.click.aliexpress.com/e/_AD5pLf


Storage box


Extension power cable for 2S and microfiber cloth

...Continue Reading
Posted by Eric Zhu | Nov 23, 2021 @ 03:58 AM | 10,345 Views
Coming Soon! Catch it! AGFRC Servo Amazon US Black Friday & Cyber Monday Promotion Activity, Up To 20% OFF Discount!

Guys, Thanksgiving is coming soon, I wish you all a happy Thanksgiving. Then, the shopping carnival-Black Friday and Cyber Monday are also coming. This year, AGFRC US Amazon flagship store has added many new products, such as standard servos such as A81CHL / A86BUMW / SA75CVSW, low-profile servos such as A66BHLW / SA18, A06CLS purple/A06CLS black mini-z car servos, and A280BVSW / A280BHMW 1/5 scales large servos.
On the occasion of Black Friday, AGFRC US Amazon flagship store will open prime exclusive discount promotions, discounts up to 20% OFF. As long as Amazon prime members purchase products, they can enjoy this discount. Hope you guys can enjoy this activity!

Name: Amazon US AGFRC Black Friday Promotion.jpg
Views: 0
Size: 918.5 KB
Description:

Activity Time: 11/25/21 12:00 AM to 11/29/21 11:59 PM
Activity Discount: Up to 20% OFF
Activity Website: https://www.amazon.com/stores/page/2...1&ref_=ast_bln

Kind Reminder: The activity website is AGFRC US Amazon flagship store, you can follow it first, and then make purchases on Black Friday or Cyber Monday, and AGFRC will update information about new products from time to time, so you can grasp relevant information for the first time.

Here are some pictures of products participating in the event, please check it out.
Posted by Frank Feldhaus | Nov 22, 2021 @ 06:24 PM | 11,462 Views
Hi guys,

I will report a report about the construction of the Blackburn Buccaneer.

The technical data of the jet:

Wingspan 200cm
Fuselage length 265cm
Weight 13,5Kg
Impeller 2 x Stumax SM110-52
ESC 2 x Hacker Mezon 130A BEC with 5V fan
Battery 11-12s 5000mAh 25C
Landing gear Giezendanner EL-15
Battery switch Jeti MaxBEX 2 / 2 x Hyperion 2s1600mAh Life
Brake cone / airbrake - 180° servo
Flaps
Receiver Jeti R12


Composition:

The first fuselage frames were drawn in CorelDraw X5. There are a lot of 2D views of the jet, where you could get the dimensions.

The model was further calculated with the FLZ method. The FLZ_Vortex program was used for this purpose. The wing sweep was defined at 0,5°.
Posted by burkefj | Nov 22, 2021 @ 04:31 PM | 11,481 Views
A few flights on my 1/14 scale X-15 to re-check trim after a servo swap...

1/14 scale X-15A2 R/C rocket glider (3 min 22 sec)

Posted by santanig5 | Nov 22, 2021 @ 03:40 PM | 10,854 Views
https://www.eclipson-airplanes.com/mxs-r

https://www.rcgroups.com/forums/show...Eclipson-MXS-R

SPECIFICATIONS
LW-PLA PLA
PRINTED WEIGHT 550gr 950gr
TAKEOFF WEIGHT 1200gr 2000gr
STALL SPEED 27kmh 35kmh
MAX LOAD FACTOR 20G 30G
WING LOADING 42g/dm² 71/gr/dm²
WING SPAN 1,350mm (53")
WING SURFACE 28dm2
WING ASPECT RATIO 5,5
WING AIRFOIL SYMETRIC
LENGTH 1040mm
Posted by valdesdariel1 | Nov 22, 2021 @ 08:53 AM | 10,026 Views
Hi friends.


My turbine is a king tech 120 G it has approximately 17 hours of use, it had been working well until yesterday when I presented the following problem.

The whole starting process makes it perfect, but when I am going to accelerate if I do it slowly it reaches the maximum acceleration without problems, but if I accelerate it fast to the maximum when it reaches the maximum acceleration it flames out and throws a Blue candle, and mark flame out on the computer.


Look for possible problems but everything seems fine:

The fuel line is not obstructed, it is perfect, the battery has a good voltage,.


The fuel pump is a PK 500 and in the settings, it is 700.
Acceleration is at 007.



Also weighing that it was the radio control, he did teaching with the turbine again and after that, he continued presenting the same problem.


According to the symptoms and the color of the fire, I think there is a lot of oxygen entering the combustion chamber and little fuel.

Some ideas that can help me, please.
Posted by VicT | Nov 22, 2021 @ 08:39 AM | 9,772 Views
https://www.rcgroups.com/forums/show...35&postcount=7

The above link is from the General forum discussion on the best wheels/tires for reducing bouncing during touchdowns. The B777 probably has the most expensive and sophisticated design to minimize bouncing. Commercial and military pilots are trained to touchdown at fairly consistent rates of descents which helps designers solve the problem. However RC flying is more difficult due to lack of visual cues and lack of oil filled shock absorbers.

RC pilots spend more time trying to make the perfect landing using different models in the same 2 hour flying session. Different models require different techniques and can lead to frustration. Sticking with one design helps to improve the best technique.
Posted by Justwingit | Nov 21, 2021 @ 07:28 PM | 11,268 Views
So this is Derek Micko's gorgeous, scratch-built Polikarpov I-16 "Rata" flying to a period correct piece of music :
Warszawianka (Whirlwinds of Danger) - Derek Micko's Polikarpov I-16 Rata at St. George Utah (4 min 16 sec)


The Warszawianka (Whirlwinds of Danger) was a very popular revolutionary song that became famous during the Spanish Civil War, where these little fighters shocked the world...

Enjoy !


Posted by Old_Pilot | Nov 21, 2021 @ 07:49 AM | 12,549 Views
I'm determined to build a conventional glider, but this time, I'm not going to try to use an 8 year old wing....and yes, she'll be based on an Ugly Stik.

First guess is a ~60" wing span with either a PW-51 or an Aquila Airfoil.Stay tuned
Posted by c/f | Nov 21, 2021 @ 12:59 AM | 13,303 Views
This is one of a rare breed from "Jerry L Smith" Paducah KY, when he made the circuits of the big fly ins in his red corvette. I don't think to many full kits like this where made in favor of just selling plans with instructions. This box seal was never opened until me this evening cause I really needed to know what's in the box prior to selling off.

Well it does not look like I will ever get to this project, heck did not even remember I had bought it until a recent hunt in the barn for JR Matchboxes someone was in need of. I wanted to time capsule document prior to selling off.
Posted by Jack Crossfire | Nov 20, 2021 @ 07:12 PM | 14,012 Views
The amerikan people are in such war against pork, let alone meat, it's a rare day that rudolf brings back any pork flavor. Lions now manely buy grocery bags for garbage bags instead of putting food in. At what point are there so many restrictions on foods & grocery bags that it's no longer worth staying?
Posted by a filos | Nov 20, 2021 @ 11:51 AM | 14,161 Views
7.5g,

50cm,
17mm tapering to 9mm
Semi solid xps core 5mm tube channel

1lay GF 50g + 1cf tow 12K spread apart + 1lay GF 50g



I start with a 4x4cm foam piece. I drill the tubular channel into the foam piece with my drill and a CF arrow shaft. This is done inch by inch since you have to unclog the channel from foam pieces cut and squeezed by the arrow shaft as it drills.
When this is done I have a 4x4x50cm piece with a tubular channel morphed into the piece. The arrow shaft serves multiple purposes. it keeps the piece straight and strong so you could work around glassing it and rapping it and it gives access to your wiring and saves 0.5g.
Then I go over to the hot wire bench. With the arrow shaft fitted into the channel, I fit two washers at the end of the piece, one of 1cm diameter and one of 1.7-2cm diameter. The washers serve as a guide for the hot wire to cut into a perfect tapered boom!

Then it's glass time, I cut the 50g cloth in one piece that will wrap 2times around the foam boom. I lightly spray the boom with glue and place it over the cloth for a full rotation. I then pause, lay down the CF hairs on the remaining cloth, hanging from the boom, and wrap the remaining cloth with the CF strings around the boom.
So I have 2layers of GF which have sandwiched CF strips.

I secure the cloth in place with a plain string with a few wraps along the boom. Then I mix epoxy and roll it onto the boom for a good soak. I drain with toilet paper the excess epoxy and wrap the whole thing with straps of PP sheets tightly until it cures.

Sound a bit too complicated, but actually, it's not! I took me about 1-2 hours to complete.
Posted by Alphonso | Nov 20, 2021 @ 10:54 AM | 14,254 Views
mig 29 new servo position
Posted by RC Roundtable | Nov 20, 2021 @ 10:03 AM | 14,407 Views
Episode 140: "Pickles and Mayo" is now live!
http://www.rcroundtable.com/podcasts...pisode_140.mp3

In this episode, the gang talks about new products, new events, and their current projects.
-Hangar 9 Fun-Scale P-47 (4:00)
-DJI Mavic 3 (26:00)
-Fitz's Flotilla Feedback (39:00)
-Round Top RC Expo (53:20)
-Lifers (1:06:45)
-Workbench Updates (1:12:20)
-Valencia Reborn (1:20:20)
-1/2A Dreams (1:45:00)

You can visit our website at RCRoundtable.com to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us an email: [email protected].
Posted by RCWorks | Nov 20, 2021 @ 07:03 AM | 14,756 Views
If the police were making proper use of riot guns at riots it would never have been an issue.

There are a lot of rights in this country. You don't have the right to destroy someone else's property or to steal their stuff.

I believe you have the right to defend your self and your property. If you get hurt committing a crime you should not be able to sue your victim.