Posted by JimLindner | Today @ 04:59 PM | 515 Views
I am new to OpenTX and Jumper, coming from a Futaba background. I borrowed the idea for a spreadsheet from another RCgroups member who did it for a Frysky X10. I use a spreadsheet for my Futaba and Jumper radios.

Page 1 of a Spreadsheet for JumplerT16

I only fly Spektrum UMX planes and Blade Helicopters so the samples are from those craft. The templates can be modified for your own use. These helped me keep my programming methods clearer in my mind so I could remember what I did and where. I also included the OTX files which go with the spreadsheet so you can see the correlation and use companion. I should caution everyone that I am new to OpenTX so although they work for me use at your own risk. The spreadsheet provides a brief description of the Logical and Special Functions.

Many people had questions on what the push-button switch would be used for so I included a model for my P47 UMX which has a sound card and uses the buttons along with switch SH for different sounds. I only have the template set up as it has not been tested on this model yet. I do fly with the other models so I know they work. I have included an OTX file for a UMX Pitts Blade Nano CpX and a UMX P47 which has flaps and landing gear but no sound. The other item on the templates which has not been tested is the SAFE related functions, as presently I have no craft with SAFE receivers.


You will need Microsoft Excell to open the spreadsheet.

OTX files are using OpenTX 2.3.5;
...Continue Reading
Posted by turbinefancy | Today @ 02:41 PM | 770 Views
My friend Alex invited me to fly his FW L-39 setup with DJI HD FPV system as chase plane as he flies a FW F-14. It was an eye opening experience, since I am not used to the speed flying FPV in jets. And the DJI FPV visuals are gorgeous. My fingers could not stop shaking the whole flight, so exhilarating! I will need to setup one for my own.

Feast your eyes in 1080P on large screen. The visuals are stunning. Near miss at 2:00....

DJI FPV F-14 Tomcat Jet Chase (4 min 38 sec)

Posted by GroundControlRC | Today @ 10:47 AM | 1,242 Views

Review - RacerStar BR1206 6000kv Motor - Info & Thrust Data - Where does it fit in?

Here is a link to the Video:

RacerStar BR1206 Motor

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #RacerStar #1206 #BrushlessMotor #ThrustTest

I purchased this Motor as another candidate Motor for a future Aircraft or Brushless Conversion.
The RacerStar Motors have proved to be excellent Budget Motors and I've used them in many of my Aircraft.
Let's see how this Motor compares with other Motors I've Tested.

Here is a link to the Thrust Data PDF File:

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

RacerStar BR1206 Motor

10 Pairs KINGKONG/LDARC 3.8*3E Propeller Spare Part For Tiny Wing 450X 431mm FPV RC Airplane

LDARC 75mm 2-blades 3Inch Racer Propeller 1.5mm Hole Diam M2 Screw Fixing Multi Rotor Parts

2 Pairs Gemfan 3025 PC Propeller CW/CCW For 1104 Motor 120 150 160 RC Drone FPV Racing Multi Rotor - Orange

DYS 3 x 2 3020 Bullnose Multicopter Prop Set (2 CW and 2 CCW) Reading
Posted by burkefj | Yesterday @ 07:00 PM | 2,775 Views
I decided to do a 150% upscale of my avro arrow, I was able to use 3" tubing, and a better nose profile cone, using single ply 9mm depron with a little carbon reinforcement and get a 37" wingspan version that comes in at 27.4 oz rtf using a 32mm G-12 8 second burn rocket motor
Accents and panel lines with sharpie pen and self adhesive vinyl. Roundels, and lettering from Stickershock23. Sims show a boost altitude of around 600'. Goal was trying to keep weight really light, using a profile of the intakes and working with a nose cone and tubing I could easily get. About 1:17 scale. This uses elevon only since I don't need rudder for boost and glide, running off a single 500mah 1s battery, very lightweight setup.
Posted by old4570 | Yesterday @ 05:44 PM | 2,823 Views
XK x450 maiden (5 min 59 sec)

A) Battery is all the way forward = Excellent hover !
B) In level flight the x450 hunts the ground
C) Transition is insanely smooth
D) The only thing I can complain about is the x450 hunting the ground in level flight .
E) Flies slower than expected in level flight
F) The altitude hold is really good ( Hover Mode )

When I came home I gave the elevon connectors two turns of up .. The other option is to change the angle of the motors in level flight ( Maybe ) or the position of the battery perhaps . ( Change one thing at a time ) Battery voltage was about 3.94v per cell when I came home and put the battery on the charger . Looks like 5 minutes with the supplied battery should be safe , maybe more depending on how you fly it .
I am impressed , and if not for the ground hunting I would have given this one a 10 out of 10 , as is the score will be 9 out of 10 . Also if not for the ground hunting on my sample , I would call the x450 the perfect beginners plane .

I got mine from BG for $99.99 USD and it looks to still be at that price ..
Posted by DTD_2112 | Yesterday @ 05:28 PM | 2,805 Views
The Crawler (0 min 55 sec)

Posted by DTD_2112 | Yesterday @ 05:23 PM | 2,810 Views
I visited a crawler track at the back of a hobby shop about 23 miles away. I got a lot of good info and picked up a few tips. Iíve started to make some changes and we are starting to add a second elevation on the crawl area of our track.
The boxes will be filled with rocks or boards of various offcut sizes on their ends that will have plenty of ways to get to the top. Tomorrow Iím building the rickety old suspension bridge. The red ink in the one photo is where the rickety suspension bridge will be built to get up to the next level.
Posted by DumbthumbsFPV | Yesterday @ 12:27 PM | 3,235 Views
I bought this and the bats.. just wanted to share..
It's really good
Mobula6 R3D Shifters Low profile Frame (5 min 37 sec)

Posted by DutchRC | Yesterday @ 12:15 PM | 3,249 Views
Halloa people

so yes. I'm going to be doing a fresh new quad build.. In fact: I will do a Detailed How To of this build.
To kinda kick things of a bit I'll start by reviewing the frame I will use in that build series. And I used a Premium frame this time

Link to the frame: Catalist Machineworks BongGOD 5" Freestyle frame

And here are my findings on the frame + some additional info on it:

the BangGOD Freestyle frame by Catalyst Machineworks! - FRAME REVIEW (20 min 38 sec)

type: Freestyle
wheelbase: 234 mm
base thickness: 5mm arms
material(s): carbon fiber + metal standoffs
weight: 142 grams
chamfered edges: yes
clean: VERY
buzzer: nope
LED board: nope
battery strap: 2x
battery anti-skid pad: nope
Posted by PittSpecial | Yesterday @ 09:58 AM | 3,618 Views
Just an amazing Prop Jet model, especially with the Electric Power System. It has been perhaps 2 years that I have not flown it so, I got the step stool and lower it down from hanging all this time. Dusted it off and checked all systems and afterwards, headed to Moon Port on Sunday, 01-26-2020. It flew for 3 flights and didn't disappoint!

A Few high resolution and wide bandwidth pictures can be seen at:

Enjoy the Video below.

Hangar9 F22 Raptor Glow-to-Electric Conversion 01-26-2020 (2 min 51 sec)

Here is an example of the speed of this Prop Jet can attain.
Hangar9 F22 Raptor Maiden Flight FAST PASS 10 25 2015 (0 min 6 sec)
...Continue Reading
Posted by jmxp69 | Jan 26, 2020 @ 10:32 PM | 4,299 Views
Maiden day for the Waco was nasty windy. I got out at sunrise and took another shot at it. A calm day made all the difference:

Dynam Waco 2nd Flight (6 min 25 sec)

Posted by GBLynden | Jan 26, 2020 @ 06:33 PM | 4,497 Views
Go for a ride on my ZOHD Talon GT Rebel RC Plane With Runcam 2 Onboard Footage!

Go For A Ride On My ZOHD Talon GT Rebel RC Plane With Runcam 2 Onboard Footage (6 min 45 sec)

Posted by Fester602 | Jan 26, 2020 @ 03:50 PM | 4,552 Views
I recently was given a skyrover 6 blade drone the remote will not pair to drone is there e anyways to download an app or make any other remote qork
Posted by Pieter Bot | Jan 26, 2020 @ 03:12 PM | 4,562 Views

My new project is to build a Jodel D9 "BeBe".
The kit is from RBC kits.
I still get some tips/tricks which help me building this plane, it's my third kit (1st Red Eagle glider, 2st Chica).
At this moment i am building the stabilo and wing. See the pictures.
Motor will be : Propdrive V2 4248 650KV
Receiver: Spektrum , type not sure yet
Posted by Old_Pilot | Jan 26, 2020 @ 01:53 PM | 4,779 Views
On the downwind leg, my instructor shut down the port engine, and wouldn't let me flying a drunken whale with a hard starboard list.......

A300 Airbus, 07L Hong Kong Port engine out (2 min 23 sec)

Posted by jmxp69 | Jan 26, 2020 @ 01:04 PM | 4,846 Views
This didn't quite work out the way I expected it to...
Dynam Grand Cruiser Maiden (14 min 58 sec)

Posted by BernardW | Jan 26, 2020 @ 12:37 PM | 4,861 Views
Very sad to hear about this -
The 3 American crew aboard that plane had come with it to Australia to help fight the fires, and perished doing it. This explains better than I can -

It says there are 80 fires still burning in NSW and half of them uncontained. So it's by no means finished yet. It's still very dangerous fire conditions across most of the country and they're burning all the time in other states too.
I think it's incredible what the water bomber crews do. These videos have most often been about the Large and Very Large Air Tankers but there are all kinds of flying machines throwing retardant against the fires. It must be so dangerous. All those fire crews out there are doing a fantastic job against those terrible fires and some are losing their lives to it. It really moves me.
Posted by skeeter honey | Jan 26, 2020 @ 12:28 PM | 5,034 Views
Being relative new to this hobby, I haven't really become accustomed to dropping a few hundred bucks on decent birds that I'll get to fly a couple dozen times (at best) before turning them into piles of garbage. So instead of a locked-in BNF plane for $250, I decided to spend just as much (not really) piecemeal on some kits, starting with something small and relatively easy and working up to a NIB GWS ME-262 kit I have collecting dust.

Finding cheap, decent ARFs doesn't seem as easy as it used to be, or so old threads here would have me believe, but I did find that one can get an old EPO FlyFly ARF kit on the Value Hobby site for only $20.

So why not? I ordered it and it arrived in no time. After checking the contents, it looked like everything was there.

I was immediately impressed (but what do I know) with the quality of the kit. Pieces fit together very nicely (manufacturing nubs notwithstanding), and it's much tougher than I was expecting. The only complaint right out of the gate was that the main gear is not F4U gear, but it'll do. The tail gear is very true to the original, and I have plans for that. Also, the left wingtip by the aileron was slightly bent, but I poured hot water on it and it popped right back into place without the surface distortion you get on EPS.
Posted by BDOG1 | Jan 26, 2020 @ 12:06 PM | 4,900 Views
I spent last evening with my monokote iron working on the tail group of the DAW 1-26 and DAW P-51 Mustang
Its so relaxing to lay some covering down and see projects nearing completion
The 1-26 needs to have the control snakes installed ,plastic covers added over the tops of the servos and then the fuse can be covered .

The Mustang fuse is ready for some 3M- 77, stapping tape and then covering .
I am using the HK covering on both planes ,it is nice to work with