Posted by jmxp69 | Today @ 03:19 PM | 14 Views
New to OpenTx and need to know how to program and apply a curve?
OpenTx Curves Complete Guide ● Throttle Curve ● Flap Curve ● Gain Curve Examples - OpenTx Beginners (22 min 29 sec)

New to RC and need to know what the heck curves are for?
OpenTx Curves Complete Guide ● Throttle Curve ● Flap Curve ● Gain Curve Examples - OpenTx Beginners (22 min 29 sec)
...Continue Reading
Posted by burkefj | Today @ 03:07 PM | 17 Views
I designed this on Thurs evening, based on some 2.6" tubing I had and a rounded nose cone that was pretty close to profile for a vulcan, wing is 32" span, 9mm depron, tail is 6mm depron as is the cockpit and motor details. I trimmed the rear of the tube to represent the stinger on the Vulcan, of course you can't really get the shape right without doing a builtup fuse and wing with the massive thick root, but I think it looks the part close enough. Length is 28", weight ready to fly wtih 24mm composite rocket motor is 10.2 oz, wing loading on glide is 5 oz/sq foot, so it's a floater.

R/C Avro Vulcan Bomber Rocket glider flight (1 min 35 sec)

Posted by burkefj | Today @ 03:05 PM | 18 Views
A customer asked if I could modify my Starship kit to have twin warp pods instead of one, it added an ounce to the overall weight, but it still flies nice and does look a bit cooler....
Dynasoar Rocketry Starship R/C rocket glider flight (1 min 5 sec)

Posted by Ibinde | Today @ 01:47 PM | 86 Views
Thought I would done something different. 68 in wing span. May not thermal that well, but it should slope
Posted by DutchRC | Today @ 11:24 AM | 216 Views
Soooooo you know what? This Geelang is very much a positive surprice to me  

Obviously having bought it I did hope it would perform decently.. 
Then.. after I ordered it I saw a review of that Caddx Loris camera..
OEPS :@ 

I'm happy with it though.. fun flier and the recordings are really nice (IMHO) 

Long Term Review: Geelang ANGER 85X 4K Micro Drone :D (13 min 39 sec)

Posted by unboxingexp | Today @ 11:19 AM | 221 Views
Happymodel Mobula6 HD unboxing + test (2 min 1 sec)

Here is another happy(model) Mobula 6 HD owner. Overall I was surprised by the HD footage I received from the onboard DVR. IMO there are only 2 major shortcomings: battery life is very short (below 2min on Gaoneng 350mAh) and some fail safes with Frsky D16.
Posted by vtdiy | Today @ 10:36 AM | 280 Views
Well, at the risk of being a little OT in my own blog, I'm putting up my latest foamy project. This time a full-sized 27 pound foam fishing boat!

I haven't made a regular thread for it here, because, well, it's not a model, and it isn't RC controlled. I actually row it!

But I think it should be of interest anyway, because many of the things I've been doing in models played a part in my design of the boat. Especially building it almost entirely using an old hacksaw blade! (I did a whole series of RCGroup build threads here called "Hacksaw Specials").

I did do a YouTube video of building the boat, and it will, I hope be enjoyable and useful to fellow RC flyguys 'n gals even if you hate water!

Hey, some giant models are bigger and heavier than my boat! And I did name it Flier.

DIY fishing boat built of foam with a hacksaw blade! (12 min 53 sec)

Posted by UpNup | Today @ 07:13 AM | 616 Views
Here is the PDF containing decals for the Carl Goldberg Electra. I have sized them for a sheet of paper 8.5" X 11" landscape.
At the top is my re-creation using PowerPoint, so that they match, but are crisper than the decal sheet that I found online. The Electra used the Countdown font, available free for downloading online. To match the decals, I made a JPG and "narrowed" it L-R about 1/2" to match .

You can print these out on Printable Vinyl. Silhouette has packs with 8 sheets currently at an Office Supply shop.
Print using your printer's highest quality print setting. Do not touch the vinyl sheet after printing for at least one hour.
Coat with a gloss clear lacquer spray. I used Rust-Oleum's rattle can spray on the sheet. Spray on one quick covering, then a second coat in five minutes.
Cut apart with scissors, peel off the backing and place on the completed plane.
Posted by Tazkiller85 | Today @ 05:03 AM | 781 Views
Yep Les Amis,
Le temps, c'est d'l'argent ... Là, y a l'temps !!! Quelle bonne surprise ce HGLRC PETREL132 en 6S ! Bien conçu et bien réglé en sortie de boite, ce petit toothpick 3 pouces bien équipé va non seulement vous surprendre par sa puissance mais également par son autonomie !!! En effet, généralement on doit choisir entre la vitesse et la durée de vol mais ce petit moustique combine les deux. Vous pourrez voler en 3S, 4S et 6S pour vous initier ou évoluer mais dans tous les cas, vous aurez un excellent temps de vol, que ce soit en cruising, freestyle ou race, il permet tous types de pilotage. En bref, pas grand chose à lui reprocher mis à part peut être le choix de la caméra pour chipoter une peu ... Si vous cherchez un engin PAS CHER, polyvalent, puissant et avec beaucoup d'autonomie, n'hésitez pas une seconde ! Bon Film et merci à tous pour votre soutien .

PETREL 132 HGLRC, Toothpick 6S - Review Test Démo - Un must have ! (36 min 10 sec)

NOTATAZ : 19/20 Whaow !
- Idéal pour Débutants et Confirmés !
Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :
Chez HGLRC :
- HGLRC PETREL 132 6S ( Coupon TazPetrel132 ) :
- HGLRC PETREL 132 4S ( Coupon TazPetrel132 ) :
- Lipo KRATOS 6S 300mAh :
- Lipo KRATOS 6S 450mAh :
- Lipo KRATOS 4S 650mAh :
- Moteurs FD1106 2400KV : ...Continue Reading
Posted by Sunset321 | Today @ 04:02 AM | 821 Views
Latest addition to my fleet.
Great small/ medium sized aerobatic plane.
Great design that flys well
Good factory hardware

Battery bay is no good, its in an awkward position and hard to secure in place.
Extra weight in nose needed to balance the plane.
Wheels suited to road surface. Will not travel on grass unless pitch & putt like surface!
Posted by alex111 | Today @ 01:23 AM | 1,161 Views
A few of my models at the boat club
Posted by TonyCams | Yesterday @ 08:19 AM | 2,703 Views
SJCAM SJ10 Pro Video Resolutions & Full Product Description:

Since we weren't able to find a comprehensive list of SJ10 Pro's video resolutions and bitrates on the SJCAM website, we will list them out here in this blog for those who are interested in the SJ10pro.

Supported SJ10 Pro Video Resolutions:


4k UItra(3840*2160)24/30fps






Video Loop durations: 1 minute, 2 minutes, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 20 minutes

SJ10 Pro Photo Resolutions:

12MP (4000*3000 4:3)

10MP (3648*2736 4:3)

8MP (3840*2160 16:9)

8MP (3264*2448 4:3)

5MP (2592*1944 4:3)

3MP (2048*1536 4:3)

2MP (1920*1080 16:9)

Video format: MP4

Photo format: JPG

Video Bitrate:

4K/60fps High quality 100Mbps Standard 60Mbps Economical 50Mbps

4K/30fps High quality 60Mbps Standard 40Mbps Economic 30Mbps

2.7K/30fps High quality 52Mbps Standard 34Mbps Economic 24Mbps

1080/60fps High quality 36Mbps Standard 30Mbps Economical 24Mbps

1080/30fps high quality 30Mbps standard 24Mbps Economic 18Mbps

720/240fps High quality 36Mbps Standard 30Mbps Economic 24Mbps

Video modes: video, loop video, slow video, video / photograph, car dashcam mode

Photo mode: photo, interval photo, continuous photo

Exposure mode: automatic, manual

White...Continue Reading
Posted by BETAFPV | Yesterday @ 06:55 AM | 2,815 Views
This is what the new products about:
Beta95X V2 Whoop Quadcopter(HD Digital VTX) - the pusher whoop drone with HD digital VTX you have been waiting for! Especially combined with Insta360 GO, you can achieve all FPV freestyle tricks easily like diving but still keep your footage impossibly smooth. Featuring the highly popular inverted drone frame, the center of gravity is right in the middle of the drone, pilots can control the drone better in flight. What's more, Beta95X V2(HD Digital VTX) equipped with Nebula Nano Kit, perfectly supports the DJI FPV goggles. BTW, we provide the camera mount for the Customized Naked Camera, so you can replace it if you need it.
Event here:
Activity 1: 10% Off on Beta85X/95X V2 & Insta360 GO
Activity 2: 1$ to Get a Case V2 for Naked Camera
Activity 3: Gift for BETAFPV 2020 Video Contest

Activity details
Bundle Promotion: 10% off for the first 50 sets(1 BNF + 1 Insta360 GO)
Specify BNF: Beta95X V2 HD Digital VTX, Beta95X V2 and Beta85X V2
Discount Limited: Each customer can only buy one set.
⏱Activity Time: Begin on 15th August at 00:00 (UTC+12).
⏱End Time: Only for the first 50 sets, then the price will be restored.
��Discount Code: No code, add the bundle to save 10%.

Noticed: Only for the first 50 sets(1 BNF + 1 Insta360 GO). Repeat purchases will only ship 1 set.
Friendship tips: Please pay attention to the time(15th August at 00:00 (UTC+12)), only for the first 50 sets, first come first served.
Fast...Continue Reading
Posted by Yowoo Linda | Yesterday @ 02:51 AM | 3,336 Views
HRB Graphene need dealer
if you are interested, please feel free to contact me.
Posted by Yowoo Linda | Yesterday @ 02:41 AM | 3,365 Views
This product makes you safer.
Posted by LD power | Yesterday @ 01:06 AM | 3,613 Views
12years experience in OEM brushless motors for top brand RC model with professional quality .

LD-POWER motor are well-know and win good reputations in RC-model area because of the high quality, smooth flight, long life

All motors use NMB bearing, 0.2 iron laminations, 42 precision process. Reading
Posted by LD power | Aug 13, 2020 @ 10:17 PM | 3,906 Views
LD-POWER Technology is a private Hi-Tech company which is found in April of 2010, and has got the ISO9001:2000 certificate of quality control system.

We engaged in developing, manufacturing and selling brushless motors with 15,00 square meters workshop. Strictly quality control and supervision on the manufacturing process guarantee all the products to meet the standard of required technology.

LD-power motor covers Rc airplane , copter, UAV, gimbal, car,truck and boat. Providing OEM and ODM service for customer. The excellent quality and efficiency could lead to be the superior brushless motor supplier in the world.

Our goal: To be the best reliable brushless motor supplier in Rc mode, UAV copter, franchiser, and hobbiyst.

Welcome to visit our factory. Your suggestion will be welcomed!

•Trustworthiness: we've got ISO9001 quality control certification;

•Expert: foucs on designing and producing brushless motors for 10 years;

•Full experience of OEM/ODM service;

•Reliable: excellent motor supplier of 85% famous RC-models brand in domestic market;

•Quality: high quality RC-model motors only;

•Service: owning high efficiency and strict core team;

•Our goal: To be the best reliable brushless motor supplier in Rc mode, UAV copter, franchiser, and hobbiyst.

Strong R&D Group

The 1st to develop Micro gimbal motor for Gopro camera
The 1 st to develop power system for the beginners
The 1st to develop the copter motor with competitive price and remarkable quality
The 80% gimbal motors are produced by LD-power technology
OEM/ ODM for special requirements
Posted by Cox PT-19 | Aug 13, 2020 @ 07:22 PM | 4,229 Views
My Ringmaster liked my new stooge so much that it took one of it's cushions for a ride.

No issues other than I was afraid to pull any maneuvers for fear of flinging the foam tube out in the rain-soaked soybeans, and not seeing where it landed. I was NOT in a mood to go searching out there.

So, I just flew out it's 12-minute+ fuel supply---circle---after circle---after circle---think there's a spot worn smooth in the asphalt...

Finally, all the Sig 10% burned up and the Ringer glided to a landing, with it's bit of ballast rolling up behind it.
Posted by jmxp69 | Aug 13, 2020 @ 06:29 PM | 4,293 Views
I'm not a Castle guy, but I wanted braking for my F3A plane and a friend told me Castle has that capability in their ESCs. So I tried one out and thought I'd give a software tour of the programmer and log graphing software:

EXCELLENT: Castle Creations Castle Link Software Tour • Data Logging and Graphing Demo • RC Plane (19 min 4 sec)