scousethief's blog View Details
Archive for August, 2018
Posted by scousethief | Aug 28, 2018 @ 11:15 AM | 16,931 Views
A quick look at the Jumper T12 Multi-Protocol transmitter , it claims 16 channels 4x3 position switches 2x2 position switches 2x programmable dials and runs OpenTX as its operating system. This is a brief teardown using my own transmitter and all information will be updated as time moves on.
You can help me catalogue these products for future modifications or repairs by buying from HERE

These are the advertised spec's etc

Jumper T12 OpenTX 16CH Radio Transmitter with JP4-in-1 Multi-protocol RF Module for Frsky JR Flysky

the T12 version does indeed support Crossfire and in CRSF mode with LUA script support
and most importantly WITHOUT any hardware modification for end users.

The T12 platform is shipped with the JP4-in-1 Multi-protocol module.
such as the TBS Crossfire or any other compatible 2.4ghz JR Module, Analogue or Long Range UHF system,
the T12 is ready to rock out with its socket out!

A standard LCD screen was used along with the T8SG V2 butter smooth V2 gimbals.

The T12 comes standard with a neck strap and AA battery tray.
Can also be powered with any LiPO or LiFE battery of a compatible size.
( Which means that users do not need to source their own uncommon sized Li-ion round cells or a round cell charger.)

The T12, when paired with the Jumper JP4-in-1 offers seamless...Continue Reading
Posted by scousethief | Aug 23, 2018 @ 07:35 AM | 16,555 Views

Available protocols are : Frsky, Frsky-V8, FrskyX,Skyartec,S-FHSS,Corona,PPM,USBHID, no direct access to Flyskys widely used protocol so just be aware ( a question was asked and answered wrongly on the website which is why i am making this absolutely clear ). ** added clone of my installed files**

Everything is kept to a minimum which i like.
...Continue Reading
Posted by scousethief | Aug 16, 2018 @ 10:37 AM | 17,564 Views

You can save up to 11% by using the coupon codes below *** edited 20/08/2018
7% off: Toyho
11% off :Toysho
8% off universal coupon code for Toys Hobbies and Robot, valid until 31st Dec. 2018.
US warehouse: USTOYS8
EU warehouse: EUTOYS8
AU warehouse: AUTOYS8

Everything starts with a box..........

...Continue Reading
Posted by scousethief | Aug 06, 2018 @ 04:58 PM | 16,162 Views
Happymodel Snapper 6 overview by the one and only Merch.

Happy Model Snapper 6 Courtesy of

HappyModel Snapper6 Overview And Test Flight (15 min 25 sec)

Brand name: Happymodel
Item name: Snapper6 FPV racing Drone
Wheelbase: 65mm
Basic version: with one battery and one USB Lipo/LIHV charger
Standard version: with 3 batteries and one 1S06 6 way Lipo/LIHV charger
Receiver: Compatible Frsky receiver / Compatible Flysky Receiver
Size: 81mm*81mm*36mm

Items Specifications
SE0603 19000KV brushless motor

Configu-ration: 9N12P
Stator diamter: 6mm
Stator length: 3mm
Shaft diameter: Φ0.8mm
Motor dimension(Dia.*Len): Φ9mm*15.5mm
Weight(g): 1.7g
No.of cells(Lipo): 1S

Crazybee F3 flight controller

Firmware: Betaflight_3.3.0_Crazybee
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Board weight: 3.5g
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4 in 1 ESC Dshot600 ready
Built-in Frsky receiver with telemetry (D8/D16 switchable)
Built-in Betaflight OSD (SPI Control)
Built-in Current meter Max 14A
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through ready
Heading LED ready

BLHeli_S 5A 4 in 1 ESC

Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Default protocol: DSHOT600

...Continue Reading